← Back to team overview

ubuntuforums-unanswered team mailing list archive

Re: [Question #77664]: wlan usb doesn't work with WL-012 on jaunty

 

Question #77664 on linux-wlan-ng in ubuntu changed:
https://answers.edge.launchpad.net/ubuntu/+source/linux-wlan-ng/+question/77664

    Status: Answered => Solved

Simon Kelly confirmed that the question is solved:
Apologies.  I'll mark this as answered, reproduce on a clean install and
raise a bug.

I've included the complete dmesg output from Hardy and Jaunty here in-
case anything here strikes you as odd

Here's the dmesg output from (a working) Hardy:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-22-generic (buildd@vernadsky) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Nov 24 18:32:42 UTC 2008 (Ubuntu 2.6.24-22.45-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f54c0
[    0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131056
[    0.000000]   HighMem    131056 ->   131056
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131056
[    0.000000] On node 0 totalpages: 131056
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125969 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F6FA0 checksum 0
[    0.000000] ACPI: RSDP 000F6FA0, 0014 (r0 VKT400)
[    0.000000] ACPI: RSDT 1FFF3000, 002C (r1 VKT400 AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 1FFF3040, 0074 (r1 VKT400 AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 1FFF30C0, 3DD0 (r1 VKT400 AWRDACPI     1000 MSFT  100000D)
[    0.000000] ACPI: FACS 1FFF0000, 0040
[    0.000000] ACPI: APIC 1FFF6EC0, 0054 (r1 VKT400 AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:8 APIC version 16
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130033
[    0.000000] Kernel command line: root=UUID=10e122a9-95d0-41df-9289-c281a196afc5 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 2002.513 MHz processor.
[   20.685115] Console: colour VGA+ 80x25
[   20.685119] console [tty0] enabled
[   20.685599] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   20.685946] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   20.703875] Memory: 507652k/524224k available (2177k kernel code, 15952k reserved, 1005k data, 368k init, 0k highmem)
[   20.703884] virtual kernel memory layout:
[   20.703885]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   20.703886]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   20.703888]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   20.703889]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[   20.703890]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   20.703891]       .data : 0xc0320704 - 0xc041bdc4   (1005 kB)
[   20.703892]       .text : 0xc0100000 - 0xc0320704   (2177 kB)
[   20.703895] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   20.703945] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   20.783918] Calibrating delay using timer specific routine.. 4009.04 BogoMIPS (lpj=8018090)
[   20.783956] Security Framework initialized
[   20.783965] SELinux:  Disabled at boot.
[   20.783988] AppArmor: AppArmor initialized
[   20.783993] Failure registering capabilities with primary security module.
[   20.784004] Mount-cache hash table entries: 512
[   20.784162] Initializing cgroup subsys ns
[   20.784167] Initializing cgroup subsys cpuacct
[   20.784180] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000
[   20.784189] CPU: CLK_CTL MSR was 60031223. Reprogramming to 20031223
[   20.784193] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   20.784196] CPU: L2 Cache: 256K (64 bytes/line)
[   20.784199] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
[   20.784211] Compat vDSO mapped to ffffe000.
[   20.784226] Checking 'hlt' instruction... OK.
[   20.800178] SMP alternatives: switching to UP code
[   20.801409] Freeing SMP alternatives: 11k freed
[   20.801570] Early unpacking initramfs... done
[   21.141352] ACPI: Core revision 20070126
[   21.141467] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   21.144424] CPU0: AMD Athlon(tm) XP 2400+ stepping 01
[   21.144448] Total of 1 processors activated (4009.04 BogoMIPS).
[   21.145204] ENABLING IO-APIC IRQs
[   21.145514] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   21.291653] Brought up 1 CPUs
[   21.291717] CPU0 attaching sched-domain:
[   21.291721]  domain 0: span 01
[   21.291723]   groups: 01
[   21.291975] net_namespace: 64 bytes
[   21.291985] Booting paravirtualized kernel on bare hardware
[   21.292476] Time: 11:32:06  Date: 07/24/09
[   21.292519] NET: Registered protocol family 16
[   21.292767] EISA bus registered
[   21.292798] ACPI: bus type pci registered
[   21.301539] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
[   21.301542] PCI: Using configuration type 1
[   21.301552] Setting up standard PCI resources
[   21.312146] ACPI: EC: Look up EC in DSDT
[   21.316176] ACPI: Interpreter enabled
[   21.316180] ACPI: (supports S0 S1 S4 S5)
[   21.316195] ACPI: Using IOAPIC for interrupt routing
[   21.321536] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   21.322014] PCI quirk: region 4000-407f claimed by vt8235 PM
[   21.322018] PCI quirk: region 5000-500f claimed by vt8235 SMB
[   21.322338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   21.341176] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[   21.341327] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[   21.341477] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[   21.341625] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[   21.341772] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[   21.341912] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[   21.342071] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[   21.342214] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
[   21.342348] Linux Plug and Play Support v0.97 (c) Adam Belay
[   21.342391] pnp: PnP ACPI init
[   21.342402] ACPI: bus type pnp registered
[   21.346089] pnp: PnP ACPI: found 14 devices
[   21.346093] ACPI: ACPI bus type pnp unregistered
[   21.346098] PnPBIOS: Disabled by ACPI PNP
[   21.346401] PCI: Using ACPI for IRQ routing
[   21.346405] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   21.375591] NET: Registered protocol family 8
[   21.375593] NET: Registered protocol family 20
[   21.375690] AppArmor: AppArmor Filesystem Enabled
[   21.379531] Time: tsc clocksource has been installed.
[   21.387571] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[   21.387574] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[   21.387577] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[   21.387580] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[   21.387583] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
[   21.387586] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[   21.387589] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[   21.387592] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
[   21.387595] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[   21.387598] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[   21.387601] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[   21.387608] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[   21.387611] system 00:02: ioport range 0x800-0x805 has been reserved
[   21.418097] PCI: Bridge: 0000:00:01.0
[   21.418099]   IO window: disabled.
[   21.418105]   MEM window: e8000000-e9ffffff
[   21.418109]   PREFETCH window: d8000000-e7ffffff
[   21.418129] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   21.418143] NET: Registered protocol family 2
[   21.455595] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   21.455854] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   21.456100] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   21.456353] TCP: Hash tables configured (established 16384 bind 16384)
[   21.456356] TCP reno registered
[   21.467664] checking if image is initramfs... it is
[   21.919192] Switched to high resolution mode on CPU 0
[   22.102501] Freeing initrd memory: 7312k freed
[   22.103379] audit: initializing netlink socket (disabled)
[   22.103398] audit(1248435127.296:1): initialized
[   22.105789] VFS: Disk quotas dquot_6.5.1
[   22.105888] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   22.106060] io scheduler noop registered
[   22.106063] io scheduler anticipatory registered
[   22.106066] io scheduler deadline registered
[   22.106078] io scheduler cfq registered (default)
[   22.106094] PCI: VIA PCI bridge detected. Disabling DAC.
[   22.106169] Boot video device is 0000:01:00.0
[   22.106509] isapnp: Scanning for PnP cards...
[   22.460284] isapnp: No Plug & Play device found
[   22.494767] Real Time Clock Driver v1.12ac
[   22.494909] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   22.495054] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   22.495212] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   22.495908] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   22.496326] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   22.497319] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   22.497402] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   22.497585] PNP: No PS/2 controller found. Probing ports directly.
[   22.497989] serio: i8042 KBD port at 0x60,0x64 irq 1
[   22.497995] serio: i8042 AUX port at 0x60,0x64 irq 12
[   22.502955] mice: PS/2 mouse device common for all mice
[   22.503119] EISA: Probing bus 0 at eisa.0
[   22.503141] Cannot allocate resource for EISA slot 4
[   22.503143] Cannot allocate resource for EISA slot 5
[   22.503158] EISA: Detected 0 cards.
[   22.503161] cpuidle: using governor ladder
[   22.503163] cpuidle: using governor menu
[   22.503335] NET: Registered protocol family 1
[   22.503372] Using IPI No-Shortcut mode
[   22.503416] registered taskstats version 1
[   22.503516]   Magic number: 1:453:530
[   22.503761] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   22.503763] EDD information not available.
[   22.504316] Freeing unused kernel memory: 368k freed
[   22.504357] Write protecting the kernel read-only data: 801k
[   23.765035] fuse init (API version 7.9)
[   23.781941] ACPI: Fan [FAN] (on)
[   23.787993] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   23.788002] ACPI: Processor [CPU0] (supports 2 throttling states)
[   23.789787] ACPI: Thermal Zone [THRM] (24 C)
[   24.373777] usbcore: registered new interface driver usbfs
[   24.373808] usbcore: registered new interface driver hub
[   24.383354] usbcore: registered new device driver usb
[   24.393342] USB Universal Host Controller Interface driver v3.0
[   24.393764] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[   24.393767] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[   24.393778] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[   24.393793] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   24.394166] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   24.394211] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000d000
[   24.394401] usb usb1: configuration #1 chosen from 1 choice
[   24.394431] hub 1-0:1.0: USB hub found
[   24.394443] hub 1-0:1.0: 2 ports detected
[   24.438300] SCSI subsystem initialized
[   24.483976] libata version 3.00 loaded.
[   24.485901] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   24.485910] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[   24.497401] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[   24.497423] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   24.497485] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   24.497514] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000d400
[   24.497642] usb usb2: configuration #1 chosen from 1 choice
[   24.497668] hub 2-0:1.0: USB hub found
[   24.497676] hub 2-0:1.0: 2 ports detected
[   24.569176] Floppy drive(s): fd0 is 1.44M
[   24.588983] FDC 0 is a post-1991 82077
[   24.601284] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[   24.601304] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   24.601351] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   24.601379] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000d800
[   24.601517] usb usb3: configuration #1 chosen from 1 choice
[   24.601543] hub 3-0:1.0: USB hub found
[   24.601551] hub 3-0:1.0: 2 ports detected
[   24.705402] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[   24.705426] ehci_hcd 0000:00:10.3: EHCI Host Controller
[   24.705466] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   24.705523] ehci_hcd 0000:00:10.3: irq 16, io mem 0xea400000
[   24.737079] usb 1-1: new low speed USB device using uhci_hcd and address 2
[   24.749009] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   24.749172] usb usb4: configuration #1 chosen from 1 choice
[   24.749203] hub 4-0:1.0: USB hub found
[   24.749213] hub 4-0:1.0: 6 ports detected
[   24.853526] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[   24.853533] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[   24.853543] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 17
[   24.857726] eth0: VIA Rhine II at 0xea401000, 00:30:1b:1f:85:1a, IRQ 17.
[   24.858435] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[   24.858796] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[   24.858799] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[   24.858805] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18
[   24.858889] ACPI: PCI interrupt for device 0000:00:11.1 disabled
[   24.866294] pata_via 0000:00:11.1: version 0.3.3
[   24.866330] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18
[   24.867747] scsi0 : pata_via
[   24.869048] scsi1 : pata_via
[   24.873420] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14
[   24.873424] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15
[   25.053389] ata1.00: ATA-6: IC35L120AVV207-0, V24OA66A, max UDMA/100
[   25.053395] ata1.00: 241254720 sectors, multi 16: LBA48
[   25.053631] ata1.01: ATA-8: Hitachi HDP725032GLAT80, GM3OA42A, max UDMA/133
[   25.053635] ata1.01: 625142448 sectors, multi 16: LBA48
[   25.077228] ata1.00: configured for UDMA/100
[   25.093266] ata1.01: configured for UDMA/133
[   25.760600] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4082B, A208, max UDMA/33
[   25.760622] ata2.01: ATAPI: LITE-ON DVDRW LH-20A1H, LL0A, max UDMA/66
[   25.760635] ata2.01: limited to UDMA/33 due to 40-wire cable
[   25.932355] ata2.00: configured for UDMA/33
[   26.107972] usb 1-1: new low speed USB device using uhci_hcd and address 3
[   26.120203] ata2.01: configured for UDMA/33
[   26.120382] scsi 0:0:0:0: Direct-Access     ATA      IC35L120AVV207-0 V24O PQ: 0 ANSI: 5
[   26.120954] scsi 0:0:1:0: Direct-Access     ATA      Hitachi HDP72503 GM3O PQ: 0 ANSI: 5
[   26.126247] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4082B A208 PQ: 0 ANSI: 5
[   26.127529] scsi 1:0:1:0: CD-ROM            LITE-ON  DVDRW LH-20A1H   LL0A PQ: 0 ANSI: 5
[   26.138659] Driver 'sd' needs updating - please use bus_type methods
[   26.138787] sd 0:0:0:0: [sda] 241254720 512-byte hardware sectors (123522 MB)
[   26.138805] sd 0:0:0:0: [sda] Write Protect is off
[   26.138808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.138828] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.138887] sd 0:0:0:0: [sda] 241254720 512-byte hardware sectors (123522 MB)
[   26.138898] sd 0:0:0:0: [sda] Write Protect is off
[   26.138901] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.138916] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.138922]  sda: sda1
[   26.148735] sd 0:0:0:0: [sda] Attached SCSI disk
[   26.148837] sd 0:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[   26.148855] sd 0:0:1:0: [sdb] Write Protect is off
[   26.148857] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   26.148877] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.148930] sd 0:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[   26.148941] sd 0:0:1:0: [sdb] Write Protect is off
[   26.148943] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   26.148959] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.148964]  sdb:<4>Driver 'sr' needs updating - please use bus_type methods
[   26.163494]  sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
[   26.224955] sd 0:0:1:0: [sdb] Attached SCSI disk
[   26.236363] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   26.236389] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   26.236411] sr 1:0:0:0: Attached scsi generic sg2 type 5
[   26.236430] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[   26.252699] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[   26.252708] Uniform CD-ROM driver Revision: 3.20
[   26.252787] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   26.260525] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   26.260611] sr 1:0:1:0: Attached scsi CD-ROM sr1
[   26.302705] usb 1-1: configuration #1 chosen from 1 choice
[   26.543753] usb 1-2: new full speed USB device using uhci_hcd and address 4
[   26.694212] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
[   26.694220] usb 1-2: config 1 has no interface number 0
[   26.706305] usb 1-2: configuration #1 chosen from 1 choice
[   26.709861] usbcore: registered new interface driver hiddev
[   26.724520] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input1
[   26.735605] input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:10.0-1
[   26.765649] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.1/input/input2
[   26.787548] input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:10.0-1
[   26.787577] usbcore: registered new interface driver usbhid
[   26.787582] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   31.994852] kjournald starting.  Commit interval 5 seconds
[   31.994873] EXT3-fs: mounted filesystem with ordered data mode.
[   39.989725] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   40.069450] Linux agpgart interface v0.102
[   40.165426] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   40.205645] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   40.252833] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[   40.268919] agpgart: AGP aperture is 128M @ 0xd0000000
[   40.481151] irda_init()
[   40.481185] NET: Registered protocol family 23
[   40.579455] input: Power Button (FF) as /devices/virtual/input/input4
[   40.589055] ACPI: Power Button (FF) [PWRF]
[   40.589251] input: Power Button (CM) as /devices/virtual/input/input5
[   40.605058] ACPI: Power Button (CM) [PWRB]
[   40.605273] input: Sleep Button (CM) as /devices/virtual/input/input6
[   40.621000] ACPI: Sleep Button (CM) [SLPB]
[   41.124755] parport_pc 00:0a: reported by Plug and Play ACPI
[   41.124814] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   42.295613] nvidia: module license 'NVIDIA' taints kernel.
[   42.862077] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[   42.941746] usbcore: registered new interface driver ndiswrapper
[   43.021819] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   43.021825] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   43.021836] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[   43.021982] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   43.539062] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[   43.539665] NVRM: loading NVIDIA Linux x86 Kernel Module  96.43.05  Tue Jan 22 19:36:58 PST 2008
[   45.700977] lp0: using parport0 (interrupt-driven).
[   46.085153] EXT3 FS on sdb1, internal journal
[   46.261311] device-mapper: uevent: version 1.0.3
[   46.261358] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@xxxxxxxxxx
[   47.472848] Adding 524280k swap on /mnt/512Mb.swap.  Priority:-1 extents:135 across:528948k
[   48.045648] ip_tables: (C) 2000-2006 Netfilter Core Team
[   48.637593] No dock devices found.
[   49.886096] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   49.886104] apm: overridden by ACPI.
[   50.042465] ppdev: user-space parallel port driver
[   50.171984] audit(1248431555.600:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5167 profile="/usr/sbin/cupsd" namespace="default"
[   51.973068] eth0: link down
[   53.058625] prism2usb_init: prism2_usb.o: 0.2.8 Loaded
[   53.058634] prism2usb_init: dev_info is: prism2_usb
[   53.186531] usb 1-2: reset full speed USB device using uhci_hcd and address 4
[   53.205301] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[   53.205661] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[   53.205883] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[   54.911721] ident: nic h/w: id=0x8010 1.0.0
[   54.912717] ident: pri f/w: id=0x15 1.0.8
[   54.913712] ident: sta f/w: id=0x1f 1.3.5
[   54.914713] MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
[   54.915709] CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
[   54.916709] PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/3
[   54.917707] STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
[   54.918712] PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
[   54.919706] STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
[   54.920705] STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
[   54.921703] Prism2 card SN: 01310007\x00\x00\x00\x00
[   54.925739] usbcore: registered new interface driver prism2_usb
[   55.605121] linkstatus=CONNECTED
[   57.100886] linkstatus=DISCONNECTED (unhandled)
[  112.850384] ident: nic h/w: id=0x8010 1.0.0
[  112.851379] ident: pri f/w: id=0x15 1.0.8
[  112.852374] ident: sta f/w: id=0x1f 1.3.5
[  112.853374] MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
[  112.854372] CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
[  112.855373] PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/3
[  112.856373] STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
[  112.857371] PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
[  112.858369] STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
[  112.859369] STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
[  112.860365] Prism2 card SN: 01310007\x00\x00\x00\x00
[  112.976712] NET: Registered protocol family 17
[  113.253012] linkstatus=DISCONNECTED (unhandled)
[  113.763588] linkstatus=CONNECTED


Here's the dmesg output from Jaunty:

[    0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.2 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  modified: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  modified: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] kernel direct mapping tables up to 1fff0000 @ 10000-16000
[    0.000000] RAMDISK: 1f8ad000 - 1ffdf733
[    0.000000] ACPI: RSDP 000F6FA0, 0014 (r0 VKT400)
[    0.000000] ACPI: RSDT 1FFF3000, 002C (r1 VKT400 AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 1FFF3040, 0074 (r1 VKT400 AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 1FFF30C0, 3DD0 (r1 VKT400 AWRDACPI     1000 MSFT  100000D)
[    0.000000] ACPI: FACS 1FFF0000, 0040
[    0.000000] ACPI: APIC 1FFF6EC0, 0054 (r1 VKT400 AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1fff0000
[    0.000000]   low ram: 00000000 - 1fff0000
[    0.000000]   bootmap 00012000 - 00016000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 000087c52c]    TEXT DATA BSS ==> [0000100000 - 000087c52c]
[    0.000000]   #4 [001f8ad000 - 001ffdf733]          RAMDISK ==> [001f8ad000 - 001ffdf733]
[    0.000000]   #5 [000087d000 - 0000881000]    INIT_PG_TABLE ==> [000087d000 - 0000881000]
[    0.000000]   #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #7 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #8 [0000012000 - 0000016000]          BOOTMAP ==> [0000012000 - 0000016000]
[    0.000000] found SMP MP-table at [c00f54c0] 000f54c0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001fff0
[    0.000000]   HighMem  0x0001fff0 -> 0x0001fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001fff0
[    0.000000] On node 0 totalpages: 130943
[    0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 125968 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129919
[    0.000000] Kernel command line: root=UUID=e4c62447-3048-4106-ac6c-533e68bd4c51 ro quiet splash
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2001.970 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.004000] allocated 2620800 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 501404k/524224k available (4126k kernel code, 22196k reserved, 2208k data, 532k init, 0k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xe07f0000 - 0xff3fe000   ( 492 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[    0.004000]       .init : 0xc0737000 - 0xc07bc000   ( 532 kB)
[    0.004000]       .data : 0xc0507a6f - 0xc072fe60   (2208 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0507a6f   (4126 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 4003.94 BogoMIPS (lpj=8007880)
[    0.004042] Security Framework initialized
[    0.004053] SELinux:  Disabled at boot.
[    0.004088] AppArmor: AppArmor initialized
[    0.004099] Mount-cache hash table entries: 512
[    0.004284] Initializing cgroup subsys ns
[    0.004289] Initializing cgroup subsys cpuacct
[    0.004292] Initializing cgroup subsys memory
[    0.004297] Initializing cgroup subsys freezer
[    0.004312] CPU: CLK_CTL MSR was 60031223. Reprogramming to 20031223
[    0.004317] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004320] CPU: L2 Cache: 256K (64 bytes/line)
[    0.004340] Checking 'hlt' instruction... OK.
[    0.020505] SMP alternatives: switching to UP code
[    0.174599] Freeing SMP alternatives: 18k freed
[    0.174607] ACPI: Core revision 20080926
[    0.176870] ACPI: Checking initramfs for custom DSDT
[    0.471831] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.511518] CPU0: AMD Athlon(tm) XP 2400+ stepping 01
[    0.512002] Brought up 1 CPUs
[    0.512002] Total of 1 processors activated (4003.94 BogoMIPS).
[    0.512002] CPU0 attaching NULL sched-domain.
[    0.512002] net_namespace: 776 bytes
[    0.512002] Booting paravirtualized kernel on bare hardware
[    0.512002] Time: 15:37:47  Date: 07/23/09
[    0.512002] regulator: core version 0.5
[    0.512002] NET: Registered protocol family 16
[    0.512002] EISA bus registered
[    0.512002] ACPI: bus type pci registered
[    0.518446] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
[    0.518449] PCI: Using configuration type 1 for base access
[    0.520027] ACPI: EC: Look up EC in DSDT
[    0.526298] ACPI: Interpreter enabled
[    0.526304] ACPI: (supports S0 S1 S4 S5)
[    0.526326] ACPI: Using IOAPIC for interrupt routing
[    0.531575] ACPI: No dock devices found.
[    0.531587] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.531653] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[    0.531729] pci 0000:00:01.0: supports D1
[    0.531770] pci 0000:00:09.0: reg 10 32bit mmio: [0xea000000-0xea3fffff]
[    0.531807] pci 0000:00:09.0: supports D2
[    0.531810] pci 0000:00:09.0: PME# supported from D2 D3hot D3cold
[    0.531815] pci 0000:00:09.0: PME# disabled
[    0.531875] pci 0000:00:10.0: reg 20 io port: [0xd000-0xd01f]
[    0.531893] pci 0000:00:10.0: supports D1 D2
[    0.531895] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.531899] pci 0000:00:10.0: PME# disabled
[    0.531948] pci 0000:00:10.1: reg 20 io port: [0xd400-0xd41f]
[    0.531966] pci 0000:00:10.1: supports D1 D2
[    0.531968] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.531973] pci 0000:00:10.1: PME# disabled
[    0.532030] pci 0000:00:10.2: reg 20 io port: [0xd800-0xd81f]
[    0.532048] pci 0000:00:10.2: supports D1 D2
[    0.532051] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.532055] pci 0000:00:10.2: PME# disabled
[    0.532087] pci 0000:00:10.3: reg 10 32bit mmio: [0xea400000-0xea4000ff]
[    0.532122] pci 0000:00:10.3: supports D1 D2
[    0.532124] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.532128] pci 0000:00:10.3: PME# disabled
[    0.532194] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.532202] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
[    0.532206] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB
[    0.532263] pci 0000:00:11.1: reg 20 io port: [0xdc00-0xdc0f]
[    0.532318] pci 0000:00:11.5: reg 10 io port: [0xe000-0xe0ff]
[    0.532355] pci 0000:00:11.5: supports D1 D2
[    0.532390] pci 0000:00:12.0: reg 10 io port: [0xe400-0xe4ff]
[    0.532397] pci 0000:00:12.0: reg 14 32bit mmio: [0xea401000-0xea4010ff]
[    0.532428] pci 0000:00:12.0: supports D1 D2
[    0.532431] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.532435] pci 0000:00:12.0: PME# disabled
[    0.532490] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xe8ffffff]
[    0.532496] pci 0000:01:00.0: reg 14 32bit mmio: [0xd8000000-0xdfffffff]
[    0.532502] pci 0000:01:00.0: reg 18 32bit mmio: [0xe0000000-0xe007ffff]
[    0.532517] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.532560] pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xe9ffffff]
[    0.532566] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xe7ffffff]
[    0.532574] bus 00 -> node 0
[    0.532582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.555430] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[    0.555647] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[    0.555864] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[    0.556089] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[    0.556304] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[    0.556514] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[    0.556752] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[    0.556956] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
[    0.557114] ACPI: WMI: Mapper loaded
[    0.557430] SCSI subsystem initialized
[    0.557495] libata version 3.00 loaded.
[    0.557562] usbcore: registered new interface driver usbfs
[    0.557584] usbcore: registered new interface driver hub
[    0.557622] usbcore: registered new device driver usb
[    0.557783] PCI: Using ACPI for IRQ routing
[    0.557888] Bluetooth: Core ver 2.13
[    0.557888] NET: Registered protocol family 31
[    0.557888] Bluetooth: HCI device and connection manager initialized
[    0.557888] Bluetooth: HCI socket layer initialized
[    0.557888] NET: Registered protocol family 8
[    0.557888] NET: Registered protocol family 20
[    0.557888] NetLabel: Initializing
[    0.557888] NetLabel:  domain hash size = 128
[    0.557888] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.557888] NetLabel:  unlabeled traffic allowed by default
[    0.557888] AppArmor: AppArmor Filesystem Enabled
[    0.557888] pnp: PnP ACPI init
[    0.557888] ACPI: bus type pnp registered
[    0.562920] pnp: PnP ACPI: found 14 devices
[    0.562923] ACPI: ACPI bus type pnp unregistered
[    0.562928] PnPBIOS: Disabled by ACPI PNP
[    0.562941] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[    0.562945] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[    0.562948] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[    0.562951] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[    0.562954] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
[    0.562957] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[    0.562960] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.562963] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
[    0.562966] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.562969] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.562972] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[    0.562979] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.562982] system 00:02: ioport range 0x800-0x805 has been reserved
[    0.597734] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.597736] pci 0000:00:01.0:   IO window: disabled
[    0.597743] pci 0000:00:01.0:   MEM window: 0xe8000000-0xe9ffffff
[    0.597747] pci 0000:00:01.0:   PREFETCH window: 0x000000d8000000-0x000000e7ffffff
[    0.597766] pci 0000:00:01.0: setting latency timer to 64
[    0.597771] bus: 00 index 0 io port: [0x00-0xffff]
[    0.597773] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.597775] bus: 01 index 0 mmio: [0x0-0x0]
[    0.597778] bus: 01 index 1 mmio: [0xe8000000-0xe9ffffff]
[    0.597780] bus: 01 index 2 mmio: [0xd8000000-0xe7ffffff]
[    0.597782] bus: 01 index 3 mmio: [0x0-0x0]
[    0.597799] NET: Registered protocol family 2
[    0.597953] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.598253] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.598491] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.598734] TCP: Hash tables configured (established 16384 bind 16384)
[    0.598738] TCP reno registered
[    0.598890] NET: Registered protocol family 1
[    0.599075] checking if image is initramfs... it is
[    1.100191] Switched to high resolution mode on CPU 0
[    1.249227] Freeing initrd memory: 7369k freed
[    1.249359] cpufreq: No nForce2 chipset.
[    1.249573] audit: initializing netlink socket (disabled)
[    1.249600] type=2000 audit(1248363468.248:1): initialized
[    1.257464] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.258870] VFS: Disk quotas dquot_6.5.1
[    1.258936] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.259634] fuse init (API version 7.10)
[    1.259725] msgmni has been set to 994
[    1.259984] alg: No test for stdrng (krng)
[    1.260029] io scheduler noop registered
[    1.260031] io scheduler anticipatory registered
[    1.260034] io scheduler deadline registered
[    1.260052] io scheduler cfq registered (default)
[    1.260072] PCI: VIA PCI bridge detected.Disabling DAC.
[    1.260172] pci 0000:01:00.0: Boot video device
[    1.264331] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.264341] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.264499] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.264503] ACPI: Power Button (FF) [PWRF]
[    1.264556] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.264558] ACPI: Power Button (CM) [PWRB]
[    1.264611] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.264619] ACPI: Sleep Button (CM) [SLPB]
[    1.264672] fan PNP0C0B:00: registered as cooling_device0
[    1.264678] ACPI: Fan [FAN] (on)
[    1.264922] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    1.264940] processor ACPI_CPU:00: registered as cooling_device1
[    1.264944] ACPI: Processor [CPU0] (supports 2 throttling states)
[    1.267652] thermal LNXTHERM:01: registered as thermal_zone0
[    1.267964] ACPI: Thermal Zone [THRM] (28 C)
[    1.268026] isapnp: Scanning for PnP cards...
[    1.621690] isapnp: No Plug & Play device found
[    1.623283] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.623388] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.623482] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.623776] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.623900] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.624826] brd: module loaded
[    1.625194] loop: module loaded
[    1.625316] Fixed MDIO Bus: probed
[    1.625324] PPP generic driver version 2.4.2
[    1.625397] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    1.625443] Driver 'sd' needs updating - please use bus_type methods
[    1.625454] Driver 'sr' needs updating - please use bus_type methods
[    1.626020] pata_via 0000:00:11.1: version 0.3.3
[    1.626446] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[    1.626449] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[    1.626463] pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    1.626787] scsi0 : pata_via
[    1.626935] scsi1 : pata_via
[    1.630215] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14
[    1.630219] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15
[    1.808582] ata1.00: ATA-6: IC35L120AVV207-0, V24OA66A, max UDMA/100
[    1.808585] ata1.00: 241254720 sectors, multi 16: LBA48
[    1.808824] ata1.01: ATA-8: Hitachi HDP725032GLAT80, GM3OA42A, max UDMA/133
[    1.808828] ata1.01: 625142448 sectors, multi 16: LBA48
[    1.832442] ata1.00: configured for UDMA/100
[    1.848436] ata1.01: configured for UDMA/133
[    2.204367] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4082B, A208, max UDMA/33
[    2.204398] ata2.01: ATAPI: LITE-ON DVDRW LH-20A1H, LL0A, max UDMA/66
[    2.204418] ata2.01: limited to UDMA/33 due to 40-wire cable
[    2.220252] ata2.00: configured for UDMA/33
[    2.252252] ata2.01: configured for UDMA/33
[    2.256242] scsi 0:0:0:0: Direct-Access     ATA      IC35L120AVV207-0 V24O PQ: 0 ANSI: 5
[    2.256373] sd 0:0:0:0: [sda] 241254720 512-byte hardware sectors: (123 GB/115 GiB)
[    2.256397] sd 0:0:0:0: [sda] Write Protect is off
[    2.256400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.256433] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.256531] sd 0:0:0:0: [sda] 241254720 512-byte hardware sectors: (123 GB/115 GiB)
[    2.256549] sd 0:0:0:0: [sda] Write Protect is off
[    2.256552] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.256583] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.256589]  sda: sda1
[    2.269924] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.269995] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.270095] scsi 0:0:1:0: Direct-Access     ATA      Hitachi HDP72503 GM3O PQ: 0 ANSI: 5
[    2.270194] sd 0:0:1:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[    2.270215] sd 0:0:1:0: [sdb] Write Protect is off
[    2.270218] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.270249] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.270312] sd 0:0:1:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[    2.270330] sd 0:0:1:0: [sdb] Write Protect is off
[    2.270333] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.270363] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.270368]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
[    2.345211] sd 0:0:1:0: [sdb] Attached SCSI disk
[    2.345265] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    2.350458] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4082B A208 PQ: 0 ANSI: 5
[    2.363672] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.363677] Uniform CD-ROM driver Revision: 3.20
[    2.363809] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.363859] sr 1:0:0:0: Attached scsi generic sg2 type 5
[    2.364881] scsi 1:0:1:0: CD-ROM            LITE-ON  DVDRW LH-20A1H   LL0A PQ: 0 ANSI: 5
[    2.369921] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.370004] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    2.370044] sr 1:0:1:0: Attached scsi generic sg3 type 5
[    2.370253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.370654] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[    2.370658] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[    2.370670] ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    2.370711] ehci_hcd 0000:00:10.3: EHCI Host Controller
[    2.370790] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[    2.370878] ehci_hcd 0000:00:10.3: irq 21, io mem 0xea400000
[    2.380026] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[    2.380117] usb usb1: configuration #1 chosen from 1 choice
[    2.380157] hub 1-0:1.0: USB hub found
[    2.380172] hub 1-0:1.0: 6 ports detected
[    2.380293] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.380315] uhci_hcd: USB Universal Host Controller Interface driver
[    2.380385] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    2.380395] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.380446] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.380467] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d000
[    2.380563] usb usb2: configuration #1 chosen from 1 choice
[    2.380588] hub 2-0:1.0: USB hub found
[    2.380600] hub 2-0:1.0: 2 ports detected
[    2.380689] uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    2.380695] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.380742] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    2.380762] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400
[    2.380845] usb usb3: configuration #1 chosen from 1 choice
[    2.380869] hub 3-0:1.0: USB hub found
[    2.380881] hub 3-0:1.0: 2 ports detected
[    2.380966] uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    2.380973] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    2.381050] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    2.381070] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
[    2.381166] usb usb4: configuration #1 chosen from 1 choice
[    2.381191] hub 4-0:1.0: USB hub found
[    2.381202] hub 4-0:1.0: 2 ports detected
[    2.381330] usbcore: registered new interface driver libusual
[    2.381380] usbcore: registered new interface driver usbserial
[    2.381393] USB Serial support registered for generic
[    2.381406] usbcore: registered new interface driver usbserial_generic
[    2.381409] usbserial: USB Serial Driver core
[    2.381466] PNP: No PS/2 controller found. Probing ports directly.
[    2.381895] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.381904] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.382052] mice: PS/2 mouse device common for all mice
[    2.382230] rtc_cmos 00:04: RTC can wake from S4
[    2.382281] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.382329] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    2.382444] device-mapper: uevent: version 1.0.3
[    2.382598] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[    2.382670] device-mapper: multipath: version 1.0.5 loaded
[    2.382674] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.382790] EISA: Probing bus 0 at eisa.0
[    2.382813] Cannot allocate resource for EISA slot 4
[    2.382815] Cannot allocate resource for EISA slot 5
[    2.382829] EISA: Detected 0 cards.
[    2.382915] cpuidle: using governor ladder
[    2.382964] cpuidle: using governor menu
[    2.383536] TCP cubic registered
[    2.383640] NET: Registered protocol family 10
[    2.384136] lo: Disabled Privacy Extensions
[    2.384479] NET: Registered protocol family 17
[    2.384513] Bluetooth: L2CAP ver 2.11
[    2.384515] Bluetooth: L2CAP socket layer initialized
[    2.384518] Bluetooth: SCO (Voice Link) ver 0.6
[    2.384520] Bluetooth: SCO socket layer initialized
[    2.384570] Bluetooth: RFCOMM socket layer initialized
[    2.384585] Bluetooth: RFCOMM TTY layer initialized
[    2.384587] Bluetooth: RFCOMM ver 1.10
[    2.384614] powernow-k8: Processor cpuid 681 not supported
[    2.384647] Using IPI No-Shortcut mode
[    2.384779] registered taskstats version 1
[    2.384893]   Magic number: 1:905:639
[    2.385039] rtc_cmos 00:04: setting system clock to 2009-07-23 15:37:49 UTC (1248363469)
[    2.385043] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.385045] EDD information not available.
[    2.385971] Freeing unused kernel memory: 532k freed
[    2.386108] Write protecting the kernel text: 4128k
[    2.386150] Write protecting the kernel read-only data: 1532k
[    2.845110] Floppy drive(s): fd0 is 1.44M
[    2.863984] FDC 0 is a post-1991 82077
[    3.011642] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    3.011649] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[    3.012167] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[    3.012171] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[    3.012184] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
[    3.033759] eth0: VIA Rhine II at 0xea401000, 00:30:1b:1f:85:1a, IRQ 23.
[    3.034470] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
[    3.132233] usb 2-1: new full speed USB device using uhci_hcd and address 2
[    3.282606] usb 2-1: config 1 has an invalid interface number: 1 but max is 0
[    3.282613] usb 2-1: config 1 has no interface number 0
[    3.294757] usb 2-1: configuration #1 chosen from 1 choice
[    3.544040] usb 2-2: new low speed USB device using uhci_hcd and address 3
[    3.548006] Marking TSC unstable due to TSC halts in idle
[    3.753965] usb 2-2: configuration #1 chosen from 1 choice
[    3.763734] usbcore: registered new interface driver hiddev
[    3.779841] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input4
[    3.780353] generic-usb 0003:062A:0102.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:10.0-2/input0
[    3.809415] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/input/input5
[    3.810014] generic-usb 0003:062A:0102.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:10.0-2/input1
[    3.810045] usbcore: registered new interface driver usbhid
[    3.810050] usbhid: v2.6:USB HID core driver
[    8.729442] EXT4-fs: barriers enabled
[    8.742583] kjournald2 starting.  Commit interval 5 seconds
[    8.742600] EXT4-fs: delayed allocation enabled
[    8.742602] EXT4-fs: file extents enabled
[    8.744087] EXT4-fs: mballoc enabled
[    8.744095] EXT4-fs: mounted filesystem with ordered data mode.
[   12.200969] udev: starting version 141
[   12.344230] parport_pc 00:0a: reported by Plug and Play ACPI
[   12.344309] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   12.414635] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.485755] Linux agpgart interface v0.103
[   12.498351] prism2usb_init: prism2_usb.o: 0.2.9 Loaded
[   12.498357] prism2usb_init: dev_info is: prism2_usb
[   12.520817] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[   12.529973] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[   12.584700] irda_init()
[   12.584733] NET: Registered protocol family 23
[   12.813711] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   13.399595] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   13.399600] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   13.399614] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[   13.399781] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   13.460827] ppdev: user-space parallel port driver
[   13.501705] hfa384x_usbctlx_complete_sync: CTLX[1] error: state(Request failed)
[   15.505329] hfa384x_usbctlx_complete_sync: CTLX[1] error: state(Request failed)
[   15.505337] hfa384x_drvr_start: cmd_initialize() failed on two attempts, results -5 and -5
[   15.506325] prism2sta_ifstate: hfa384x_drvr_start() failed,result=-5
[   15.506447] usbcore: registered new interface driver prism2_usb
[   15.731931] lp0: using parport0 (interrupt-driven).
[   16.110850] EXT4 FS on sdb5, internal journal on sdb5:8
[   16.627320] type=1505 audit(1248359883.738:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2034
[   16.699064] type=1505 audit(1248359883.810:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2040
[   16.699416] type=1505 audit(1248359883.810:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2040
[   16.699525] type=1505 audit(1248359883.810:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2040
[   16.699613] type=1505 audit(1248359883.810:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2040
[   16.902535] type=1505 audit(1248359884.014:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2045
[   16.902988] type=1505 audit(1248359884.014:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2045
[   16.947406] type=1505 audit(1248359884.058:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2049
[   18.625774] hfa384x_usbctlx_complete_sync: CTLX[1] error: state(Request failed)
[   20.629401] hfa384x_usbctlx_complete_sync: CTLX[1] error: state(Request failed)
[   20.629407] hfa384x_drvr_start: cmd_initialize() failed on two attempts, results -5 and -5
[   20.631406] prism2sta_ifstate: hfa384x_drvr_start() failed,result=-5
[   21.260087] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.260093] Bluetooth: BNEP filters: protocol multicast
[   21.294498] Bridge firewalling registered
[   25.890555] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   36.832025] eth0: no IPv6 routers present
[  125.016157] kjournald starting.  Commit interval 5 seconds
[  125.017030] EXT3 FS on sdb1, internal journal
[  125.017041] EXT3-fs: mounted filesystem with ordered data mode.

-- 
You received this question notification because you are a member of UF
Unanswered Posts Team, which is an answer contact for Ubuntu.