ubuntuforums-unanswered team mailing list archive
-
ubuntuforums-unanswered team
-
Mailing list archive
-
Message #08215
Re: [Question #78338]: Dark Movies
Question #78338 on Ubuntu changed:
https://answers.launchpad.net/ubuntu/+question/78338
Status: Needs information => Open
Tom gave more information on the question:
I haven't installed any drivers because doing so broke my system. When
i first upgraded to 9.04 i thought i would leave the drivers until later
and i've only just thought about fixing it just now ;)
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378c2000 - 37fef1e5
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fae1e5
[ 0.000000] Move RAMDISK from 00000000378c2000 - 0000000037fef1e4 to 00881000 - 00fae1e4
[ 0.000000] ACPI: RSDP 000F8650, 0014 (r0 RD480 )
[ 0.000000] ACPI: RSDT 7FEF3040, 0034 (r1 RD480 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FEF30C0, 0074 (r1 RD480 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FEF3180, 3E57 (r1 RD480 AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FEF0000, 0040
[ 0.000000] ACPI: SRAT 7FEF7100, 00A0 (r1 AMD HAMMER 1 AMD 1)
[ 0.000000] ACPI: MCFG 7FEF7200, 003C (r1 RD480 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FEF7040, 0068 (r1 RD480 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1162MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fae1e5] NEW RAMDISK ==> [0000881000 - 0000fae1e5]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f4760] 000f4760
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007fef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fef0
[ 0.000000] On node 0 totalpages: 523903
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2326 pages used for memmap
[ 0.000000] HighMem zone: 295388 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] SB4X0 revision 0x81
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809
[ 0.000000] Kernel command line: root=UUID=66daaabd-ec15-4184-9ee5-df800b17fde2 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1799.718 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 10480000 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2052076k/2096064k available (4126k kernel code, 42604k reserved, 2208k data, 532k init, 1190856k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.43 BogoMIPS (lpj=7198872)
[ 0.004030] Security Framework initialized
[ 0.004036] SELinux: Disabled at boot.
[ 0.004061] AppArmor: AppArmor initialized
[ 0.004068] Mount-cache hash table entries: 512
[ 0.004204] Initializing cgroup subsys ns
[ 0.004208] Initializing cgroup subsys cpuacct
[ 0.004210] Initializing cgroup subsys memory
[ 0.004214] Initializing cgroup subsys freezer
[ 0.004226] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004228] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004231] CPU: Physical Processor ID: 0
[ 0.004232] CPU: Processor Core ID: 0
[ 0.004245] Checking 'hlt' instruction... OK.
[ 0.022054] ACPI: Core revision 20080926
[ 0.023383] ACPI: Checking initramfs for custom DSDT
[ 0.340284] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.379968] CPU0: Dual Core AMD Opteron(tm) Processor 165 stepping 02
[ 0.380001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3599.84 BogoMIPS (lpj=7199699)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.464263] CPU1: Dual Core AMD Opteron(tm) Processor 165 stepping 02
[ 0.464320] Brought up 2 CPUs
[ 0.464323] Total of 2 processors activated (7199.28 BogoMIPS).
[ 0.464375] CPU0 attaching sched-domain:
[ 0.464378] domain 0: span 0-1 level CPU
[ 0.464381] groups: 0 1
[ 0.464387] CPU1 attaching sched-domain:
[ 0.464389] domain 0: span 0-1 level CPU
[ 0.464391] groups: 1 0
[ 0.464453] net_namespace: 776 bytes
[ 0.464453] Booting paravirtualized kernel on bare hardware
[ 0.464453] Time: 13:14:41 Date: 07/23/09
[ 0.464453] regulator: core version 0.5
[ 0.464453] NET: Registered protocol family 16
[ 0.464453] EISA bus registered
[ 0.464453] ACPI: bus type pci registered
[ 0.464453] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.464453] PCI: MCFG area at e0000000 reserved in E820
[ 0.464453] PCI: Using MMCONFIG for extended config space
[ 0.464453] PCI: Using configuration type 1 for base access
[ 0.465115] ACPI: EC: Look up EC in DSDT
[ 0.472321] ACPI: Interpreter enabled
[ 0.472324] ACPI: (supports S0 S1 S4 S5)
[ 0.472343] ACPI: Using IOAPIC for interrupt routing
[ 0.476161] ACPI: No dock devices found.
[ 0.476174] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.476242] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.476246] pci 0000:00:02.0: PME# disabled
[ 0.476271] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.476274] pci 0000:00:04.0: PME# disabled
[ 0.476345] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
[ 0.476354] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.476363] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.476372] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.476380] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.476389] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f1ff]
[ 0.476398] pci 0000:00:11.0: reg 30 32bit mmio: [0x000000-0x07ffff]
[ 0.476413] pci 0000:00:11.0: supports D1 D2
[ 0.476469] pci 0000:00:12.0: reg 10 io port: [0xfa00-0xfa07]
[ 0.476477] pci 0000:00:12.0: reg 14 io port: [0xf900-0xf903]
[ 0.476486] pci 0000:00:12.0: reg 18 io port: [0xf800-0xf807]
[ 0.476495] pci 0000:00:12.0: reg 1c io port: [0xf700-0xf703]
[ 0.476503] pci 0000:00:12.0: reg 20 io port: [0xf600-0xf60f]
[ 0.476512] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02e000-0xfe02e1ff]
[ 0.476521] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x07ffff]
[ 0.476535] pci 0000:00:12.0: supports D1 D2
[ 0.476582] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.476674] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.476776] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.476826] pci 0000:00:13.2: supports D1 D2
[ 0.476828] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.476833] pci 0000:00:13.2: PME# disabled
[ 0.476885] pci 0000:00:14.0: reg 10 io port: [0x400-0x40f]
[ 0.476894] pci 0000:00:14.0: reg 14 32bit mmio: [0xfe02a000-0xfe02a3ff]
[ 0.476931] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.476981] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.476990] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.476999] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.477007] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.477016] pci 0000:00:14.1: reg 20 io port: [0xf400-0xf40f]
[ 0.477102] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
[ 0.477146] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.477152] pci 0000:00:14.2: PME# disabled
[ 0.477360] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.477369] pci 0000:01:00.0: reg 18 64bit mmio: [0xfdaf0000-0xfdafffff]
[ 0.477374] pci 0000:01:00.0: reg 20 io port: [0xee00-0xeeff]
[ 0.477383] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.477390] pci 0000:01:00.0: supports D1 D2
[ 0.477419] pci 0000:01:00.1: reg 10 64bit mmio: [0xfdae0000-0xfdaeffff]
[ 0.477442] pci 0000:01:00.1: supports D1 D2
[ 0.477503] pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
[ 0.477506] pci 0000:00:02.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.477510] pci 0000:00:02.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.477565] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdcfc000-0xfdcfffff]
[ 0.477573] pci 0000:02:00.0: reg 18 io port: [0xde00-0xdeff]
[ 0.477598] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.477610] pci 0000:02:00.0: supports D1 D2
[ 0.477612] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.477617] pci 0000:02:00.0: PME# disabled
[ 0.477677] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff]
[ 0.477680] pci 0000:00:04.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.477683] pci 0000:00:04.0: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.477750] pci 0000:03:08.0: reg 10 io port: [0xcf00-0xcf07]
[ 0.477760] pci 0000:03:08.0: reg 14 io port: [0xce00-0xce03]
[ 0.477770] pci 0000:03:08.0: reg 18 io port: [0xcd00-0xcd07]
[ 0.477780] pci 0000:03:08.0: reg 1c io port: [0xcc00-0xcc03]
[ 0.477791] pci 0000:03:08.0: reg 20 io port: [0xcb00-0xcb0f]
[ 0.477801] pci 0000:03:08.0: reg 24 32bit mmio: [0xfdeff000-0xfdeff3ff]
[ 0.477811] pci 0000:03:08.0: reg 30 32bit mmio: [0x000000-0x07ffff]
[ 0.477825] pci 0000:03:08.0: supports D1 D2
[ 0.477880] pci 0000:03:09.0: reg 10 32bit mmio: [0xfdefe000-0xfdefe7ff]
[ 0.477891] pci 0000:03:09.0: reg 14 io port: [0xca00-0xca7f]
[ 0.477947] pci 0000:03:09.0: supports D2
[ 0.477949] pci 0000:03:09.0: PME# supported from D2 D3hot D3cold
[ 0.477955] pci 0000:03:09.0: PME# disabled
[ 0.478022] pci 0000:03:0a.0: reg 10 32bit mmio: [0xfdef8000-0xfdefbfff]
[ 0.478032] pci 0000:03:0a.0: reg 14 io port: [0xc800-0xc8ff]
[ 0.478074] pci 0000:03:0a.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.478089] pci 0000:03:0a.0: supports D1 D2
[ 0.478091] pci 0000:03:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.478097] pci 0000:03:0a.0: PME# disabled
[ 0.478151] pci 0000:00:14.4: transparent bridge
[ 0.478160] pci 0000:00:14.4: bridge io port: [0xc000-0xcfff]
[ 0.478165] pci 0000:00:14.4: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.478171] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.478185] bus 00 -> node 0
[ 0.478190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.478491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.478695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.478783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.494603] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.494714] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.494820] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.494925] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.495031] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
[ 0.495135] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11)
[ 0.495239] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *10 11)
[ 0.495344] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11)
[ 0.495475] ACPI: WMI: Mapper loaded
[ 0.495513] SCSI subsystem initialized
[ 0.495513] libata version 3.00 loaded.
[ 0.495513] usbcore: registered new interface driver usbfs
[ 0.495513] usbcore: registered new interface driver hub
[ 0.495513] usbcore: registered new device driver usb
[ 0.495513] PCI: Using ACPI for IRQ routing
[ 0.500012] Bluetooth: Core ver 2.13
[ 0.500028] NET: Registered protocol family 31
[ 0.500028] Bluetooth: HCI device and connection manager initialized
[ 0.500028] Bluetooth: HCI socket layer initialized
[ 0.500028] NET: Registered protocol family 8
[ 0.500028] NET: Registered protocol family 20
[ 0.500034] NetLabel: Initializing
[ 0.500036] NetLabel: domain hash size = 128
[ 0.500038] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.500052] NetLabel: unlabeled traffic allowed by default
[ 0.500122] AppArmor: AppArmor Filesystem Enabled
[ 0.504009] pnp: PnP ACPI init
[ 0.504017] ACPI: bus type pnp registered
[ 0.506740] pnp: PnP ACPI: found 13 devices
[ 0.506742] ACPI: ACPI bus type pnp unregistered
[ 0.506745] PnPBIOS: Disabled by ACPI PNP
[ 0.506754] system 00:01: ioport range 0x140-0x15f has been reserved
[ 0.506757] system 00:01: ioport range 0x228-0x22f has been reserved
[ 0.506760] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
[ 0.506763] system 00:01: ioport range 0xc00-0xc01 has been reserved
[ 0.506765] system 00:01: ioport range 0xc14-0xc14 has been reserved
[ 0.506768] system 00:01: ioport range 0xc50-0xc52 has been reserved
[ 0.506771] system 00:01: ioport range 0xc6c-0xc6d has been reserved
[ 0.506774] system 00:01: ioport range 0xc6f-0xc6f has been reserved
[ 0.506777] system 00:01: ioport range 0xcd4-0xcdf has been reserved
[ 0.506780] system 00:01: ioport range 0x4000-0x40fe has been reserved
[ 0.506783] system 00:01: ioport range 0x4210-0x4217 has been reserved
[ 0.506790] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.506793] system 00:06: ioport range 0x220-0x225 has been reserved
[ 0.506804] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.506811] system 00:0c: iomem range 0xd1000-0xd3fff has been reserved
[ 0.506814] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.506817] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.506821] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.506824] system 00:0c: iomem range 0x7ff00000-0x7fffffff has been reserved
[ 0.506827] system 00:0c: iomem range 0x7fef0000-0x7fefffff could not be reserved
[ 0.506831] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.506834] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.506838] system 00:0c: iomem range 0x100000-0x7feeffff could not be reserved
[ 0.506841] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.506844] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.506848] system 00:0c: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.541573] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.541576] pci 0000:00:02.0: IO window: 0xe000-0xefff
[ 0.541580] pci 0000:00:02.0: MEM window: 0xfda00000-0xfdafffff
[ 0.541584] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.541589] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.541592] pci 0000:00:04.0: IO window: 0xd000-0xdfff
[ 0.541595] pci 0000:00:04.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.541598] pci 0000:00:04.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.541603] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 0.541607] pci 0000:00:14.4: IO window: 0xc000-0xcfff
[ 0.541614] pci 0000:00:14.4: MEM window: 0xfde00000-0xfdefffff
[ 0.541620] pci 0000:00:14.4: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.541634] pci 0000:00:02.0: setting latency timer to 64
[ 0.541639] pci 0000:00:04.0: setting latency timer to 64
[ 0.541648] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.541650] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.541652] bus: 01 index 0 io port: [0xe000-0xefff]
[ 0.541655] bus: 01 index 1 mmio: [0xfda00000-0xfdafffff]
[ 0.541657] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.541659] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.541661] bus: 02 index 0 io port: [0xd000-0xdfff]
[ 0.541664] bus: 02 index 1 mmio: [0xfdc00000-0xfdcfffff]
[ 0.541666] bus: 02 index 2 mmio: [0xfdb00000-0xfdbfffff]
[ 0.541669] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.541671] bus: 03 index 0 io port: [0xc000-0xcfff]
[ 0.541673] bus: 03 index 1 mmio: [0xfde00000-0xfdefffff]
[ 0.541676] bus: 03 index 2 mmio: [0xfdd00000-0xfddfffff]
[ 0.541678] bus: 03 index 3 io port: [0x00-0xffff]
[ 0.541680] bus: 03 index 4 mmio: [0x000000-0xffffffff]
[ 0.541689] NET: Registered protocol family 2
[ 0.544022] Switched to high resolution mode on CPU 0
[ 0.544337] Switched to high resolution mode on CPU 1
[ 0.556070] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.556378] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.557078] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.557476] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.557479] TCP reno registered
[ 0.564095] NET: Registered protocol family 1
[ 0.564222] checking if image is initramfs... it is
[ 1.207937] Freeing initrd memory: 7348k freed
[ 1.208172] cpufreq: No nForce2 chipset.
[ 1.208304] audit: initializing netlink socket (disabled)
[ 1.208324] type=2000 audit(1248354881.208:1): initialized
[ 1.217193] highmem bounce pool size: 64 pages
[ 1.217198] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.218563] VFS: Disk quotas dquot_6.5.1
[ 1.218620] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.219273] fuse init (API version 7.10)
[ 1.219356] msgmni has been set to 1698
[ 1.219606] alg: No test for stdrng (krng)
[ 1.219620] io scheduler noop registered
[ 1.219622] io scheduler anticipatory registered
[ 1.219624] io scheduler deadline registered
[ 1.219640] io scheduler cfq registered (default)
[ 1.219646] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 9.216023] pci 0000:00:13.2: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 9.216045] pci 0000:01:00.0: Boot video device
[ 9.216125] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 9.216148] pcieport-driver 0000:00:02.0: found MSI capability
[ 9.216151] pci_express 0000:00:02.0:pcie00: allocate port service
[ 9.216166] pci_express 0000:00:02.0:pcie01: allocate port service
[ 9.216204] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 9.216224] pcieport-driver 0000:00:04.0: found MSI capability
[ 9.216227] pci_express 0000:00:04.0:pcie00: allocate port service
[ 9.216240] pci_express 0000:00:04.0:pcie01: allocate port service
[ 9.217419] aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
[ 9.218487] aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support
[ 9.218497] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.218508] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 9.218643] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 9.218646] ACPI: Power Button (FF) [PWRF]
[ 9.218690] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 9.218693] ACPI: Power Button (CM) [PWRB]
[ 9.218746] fan PNP0C0B:00: registered as cooling_device0
[ 9.218752] ACPI: Fan [FAN] (on)
[ 9.218968] processor ACPI_CPU:00: registered as cooling_device1
[ 9.219003] processor ACPI_CPU:01: registered as cooling_device2
[ 9.221050] thermal LNXTHERM:01: registered as thermal_zone0
[ 9.221564] ACPI: Thermal Zone [THRM] (-127 C)
[ 9.221610] isapnp: Scanning for PnP cards...
[ 9.575896] isapnp: No Plug & Play device found
[ 9.585139] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 9.585266] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 9.585391] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 9.585716] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 9.586481] brd: module loaded
[ 9.586799] loop: module loaded
[ 9.586870] Fixed MDIO Bus: probed
[ 9.586876] PPP generic driver version 2.4.2
[ 9.586936] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 9.586962] Driver 'sd' needs updating - please use bus_type methods
[ 9.586972] Driver 'sr' needs updating - please use bus_type methods
[ 9.587084] sata_sil 0000:00:11.0: version 2.3
[ 9.587123] sata_sil 0000:00:11.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 9.587222] scsi0 : sata_sil
[ 9.587344] scsi1 : sata_sil
[ 9.587470] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 23
[ 9.587474] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 23
[ 9.904061] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9.912502] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB03, max UDMA/33
[ 9.912514] ata1.00: applying bridge limits
[ 9.928515] ata1.00: configured for UDMA/33
[ 10.248043] ata2: SATA link down (SStatus 0 SControl 310)
[ 10.248669] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB03 PQ: 0 ANSI: 5
[ 10.251277] sr0: scsi3-mmc drive: 32x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 10.251280] Uniform CD-ROM driver Revision: 3.20
[ 10.251365] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 10.251408] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 10.251447] sata_sil 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.251527] scsi2 : sata_sil
[ 10.251602] scsi3 : sata_sil
[ 10.251723] ata3: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e080 irq 22
[ 10.251728] ata4: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e0c0 irq 22
[ 10.568058] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.202507] ata3.00: ATA-8: WDC WD10EACS-00D6B1, 01.01A01, max UDMA/133
[ 11.202510] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 11.209122] ata3.00: configured for UDMA/100
[ 11.528042] ata4: SATA link down (SStatus 0 SControl 310)
[ 11.528119] scsi 2:0:0:0: Direct-Access ATA WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5
[ 11.528211] sd 2:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 11.528227] sd 2:0:0:0: [sda] Write Protect is off
[ 11.528230] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.528255] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.528317] sd 2:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 11.528331] sd 2:0:0:0: [sda] Write Protect is off
[ 11.528334] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.528357] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.528362] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 11.609255] sd 2:0:0:0: [sda] Attached SCSI disk
[ 11.609293] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 11.609355] sata_sil 0000:03:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 11.609378] sata_sil 0000:03:08.0: Applying R_ERR on DMA activate FIS errata fix
[ 11.609462] scsi4 : sata_sil
[ 11.609539] scsi5 : sata_sil
[ 11.609640] scsi6 : sata_sil
[ 11.609731] scsi7 : sata_sil
[ 11.609769] ata5: SATA max UDMA/100 mmio m1024@0xfdeff000 tf 0xfdeff080 irq 23
[ 11.609773] ata6: SATA max UDMA/100 mmio m1024@0xfdeff000 tf 0xfdeff0c0 irq 23
[ 11.609777] ata7: SATA max UDMA/100 mmio m1024@0xfdeff000 tf 0xfdeff280 irq 23
[ 11.609782] ata8: SATA max UDMA/100 mmio m1024@0xfdeff000 tf 0xfdeff2c0 irq 23
[ 11.928046] ata5: SATA link down (SStatus 0 SControl 310)
[ 12.248046] ata6: SATA link down (SStatus 0 SControl 310)
[ 12.568047] ata7: SATA link down (SStatus 0 SControl 310)
[ 12.888046] ata8: SATA link down (SStatus 0 SControl 310)
[ 12.888235] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.888371] scsi8 : pata_atiixp
[ 12.888465] scsi9 : pata_atiixp
[ 12.889478] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 12.889481] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 13.061104] ata9.00: ATA-5: FUJITSU MPF3204AT, 0028, max UDMA/66
[ 13.061106] ata9.00: 40031712 sectors, multi 16: LBA
[ 13.061472] ata9.01: ATA-4: ST310215A, 3.05, max UDMA/100
[ 13.061474] ata9.01: 19541088 sectors, multi 16: LBA
[ 13.076849] ata9.00: configured for UDMA/66
[ 13.092678] ata9.01: configured for UDMA/100
[ 13.256582] ata10.00: ATAPI: _NEC DVD_RW ND-4550A, 1.X7, max UDMA/33
[ 13.272563] ata10.00: configured for UDMA/33
[ 13.272896] scsi 8:0:0:0: Direct-Access ATA FUJITSU MPF3204A 0028 PQ: 0 ANSI: 5
[ 13.272983] sd 8:0:0:0: [sdb] 40031712 512-byte hardware sectors: (20.4 GB/19.0 GiB)
[ 13.272998] sd 8:0:0:0: [sdb] Write Protect is off
[ 13.273012] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 13.273036] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.273087] sd 8:0:0:0: [sdb] 40031712 512-byte hardware sectors: (20.4 GB/19.0 GiB)
[ 13.273101] sd 8:0:0:0: [sdb] Write Protect is off
[ 13.273103] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 13.273127] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.273131] sdb: sdb1 sdb3 sdb4 < sdb5 sdb6 >
[ 13.825845] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 13.825882] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 13.825946] scsi 8:0:1:0: Direct-Access ATA ST310215A 3.05 PQ: 0 ANSI: 5
[ 13.826026] sd 8:0:1:0: [sdc] 19541088 512-byte hardware sectors: (10.0 GB/9.31 GiB)
[ 13.826041] sd 8:0:1:0: [sdc] Write Protect is off
[ 13.826043] sd 8:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 13.826066] sd 8:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.826119] sd 8:0:1:0: [sdc] 19541088 512-byte hardware sectors: (10.0 GB/9.31 GiB)
[ 13.826133] sd 8:0:1:0: [sdc] Write Protect is off
[ 13.826135] sd 8:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 13.826159] sd 8:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.826162] sdc: sdc1 sdc2
[ 13.862312] sd 8:0:1:0: [sdc] Attached SCSI disk
[ 13.862352] sd 8:0:1:0: Attached scsi generic sg3 type 0
[ 13.863593] scsi 9:0:0:0: CD-ROM _NEC DVD_RW ND-4550A 1.X7 PQ: 0 ANSI: 5
[ 13.866957] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 13.867018] sr 9:0:0:0: Attached scsi CD-ROM sr1
[ 13.867058] sr 9:0:0:0: Attached scsi generic sg4 type 5
[ 13.867520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 13.867541] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 13.867556] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 13.867619] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 13.867679] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000
[ 13.876028] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 13.876111] usb usb1: configuration #1 chosen from 1 choice
[ 13.876141] hub 1-0:1.0: USB hub found
[ 13.876150] hub 1-0:1.0: 8 ports detected
[ 13.876277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 13.876292] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 13.876305] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 13.876349] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 13.876366] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000
[ 13.936056] usb usb2: configuration #1 chosen from 1 choice
[ 13.936082] hub 2-0:1.0: USB hub found
[ 13.936093] hub 2-0:1.0: 4 ports detected
[ 13.936191] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 13.936203] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 13.936247] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 13.936262] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000
[ 13.992056] usb usb3: configuration #1 chosen from 1 choice
[ 13.992081] hub 3-0:1.0: USB hub found
[ 13.992092] hub 3-0:1.0: 4 ports detected
[ 13.992188] uhci_hcd: USB Universal Host Controller Interface driver
[ 13.992251] usbcore: registered new interface driver libusual
[ 13.992289] usbcore: registered new interface driver usbserial
[ 13.992300] USB Serial support registered for generic
[ 13.992314] usbcore: registered new interface driver usbserial_generic
[ 13.992317] usbserial: USB Serial Driver core
[ 13.992358] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 13.992361] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 13.992696] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.997049] mice: PS/2 mouse device common for all mice
[ 14.009075] rtc_cmos 00:03: RTC can wake from S4
[ 14.009113] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 14.009142] rtc0: alarms up to one month, 242 bytes nvram
[ 14.009204] device-mapper: uevent: version 1.0.3
[ 14.009303] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 14.009514] device-mapper: multipath: version 1.0.5 loaded
[ 14.009517] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 14.009642] EISA: Probing bus 0 at eisa.0
[ 14.009664] Cannot allocate resource for EISA slot 4
[ 14.009684] EISA: Detected 0 cards.
[ 14.009816] cpuidle: using governor ladder
[ 14.009819] cpuidle: using governor menu
[ 14.010343] TCP cubic registered
[ 14.010439] NET: Registered protocol family 10
[ 14.010858] lo: Disabled Privacy Extensions
[ 14.011183] NET: Registered protocol family 17
[ 14.011201] Bluetooth: L2CAP ver 2.11
[ 14.011203] Bluetooth: L2CAP socket layer initialized
[ 14.011206] Bluetooth: SCO (Voice Link) ver 0.6
[ 14.011207] Bluetooth: SCO socket layer initialized
[ 14.011265] Bluetooth: RFCOMM socket layer initialized
[ 14.011270] Bluetooth: RFCOMM TTY layer initialized
[ 14.011272] Bluetooth: RFCOMM ver 1.10
[ 14.011323] powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 165 processors (2 cpu cores) (version 2.20.00)
[ 14.011348] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[ 14.011423] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[ 14.011492] Using IPI No-Shortcut mode
[ 14.011559] registered taskstats version 1
[ 14.011703] Magic number: 1:281:231
[ 14.011799] rtc_cmos 00:03: setting system clock to 2009-07-23 13:14:54 UTC (1248354894)
[ 14.011802] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 14.011805] EDD information not available.
[ 14.012189] Freeing unused kernel memory: 532k freed
[ 14.012352] Write protecting the kernel text: 4128k
[ 14.012410] Write protecting the kernel read-only data: 1532k
[ 14.044548] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 14.231664] sky2 driver version 1.22
[ 14.231710] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.231721] sky2 0000:02:00.0: setting latency timer to 64
[ 14.231775] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
[ 14.263679] sky2 0000:02:00.0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
[ 14.263682] Part Number: Yukon 88E8053
[ 14.263684] Engineering Level: Rev. 1.9
[ 14.263686] Manufacturer: Marvell
[ 14.265034] sky2 eth0: addr 00:01:29:d3:74:9d
[ 14.268110] Floppy drive(s): fd0 is 1.44M
[ 14.288849] FDC 0 is a post-1991 82077
[ 14.345121] skge 0000:03:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 14.345224] skge 1.13 addr 0xfdef8000 irq 21 chip Yukon-Lite rev 9
[ 14.346075] skge eth1: addr 00:01:29:d3:74:cf
[ 14.353146] ohci1394 0000:03:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 14.404944] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 14.609027] usb 2-4: new full speed USB device using ohci_hcd and address 2
[ 14.818138] usb 2-4: configuration #1 chosen from 1 choice
[ 14.824346] Initializing USB Mass Storage driver...
[ 14.824457] scsi10 : SCSI emulation for USB Mass Storage devices
[ 14.824549] usbcore: registered new interface driver usb-storage
[ 14.824553] USB Mass Storage support registered.
[ 14.824653] usb-storage: device found at 2
[ 14.824655] usb-storage: waiting for device to settle before scanning
[ 15.128024] usb 3-3: new full speed USB device using ohci_hcd and address 2
[ 15.335146] usb 3-3: configuration #1 chosen from 1 choice
[ 15.337097] hub 3-3:1.0: USB hub found
[ 15.339070] hub 3-3:1.0: 4 ports detected
[ 15.348098] PM: Starting manual resume from disk
[ 15.348102] PM: Resume from partition 8:22
[ 15.348104] PM: Checking hibernation image.
[ 15.348427] PM: Resume from disk failed.
[ 15.374439] kjournald starting. Commit interval 5 seconds
[ 15.374450] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.634067] usb 3-3.1: new low speed USB device using ohci_hcd and address 3
[ 15.684141] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00012920000407bc]
[ 15.740130] usb 3-3.1: configuration #1 chosen from 1 choice
[ 15.818066] usb 3-3.4: new low speed USB device using ohci_hcd and address 4
[ 15.930119] usb 3-3.4: configuration #1 chosen from 1 choice
[ 19.825147] usb-storage: device scan complete
[ 19.831093] scsi 10:0:0:0: CD-ROM Novatel Mass Storage 1.00 PQ: 0 ANSI: 2
[ 19.875076] sr2: scsi-1 drive
[ 19.875167] sr 10:0:0:0: Attached scsi CD-ROM sr2
[ 19.875228] sr 10:0:0:0: Attached scsi generic sg5 type 5
[ 24.727214] udev: starting version 141
[ 25.149342] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 25.405620] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x400, revision 0
[ 25.703133] Linux agpgart interface v0.103
[ 26.503714] usbcore: registered new interface driver hiddev
[ 26.508405] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-3/3-3.1/3-3.1:1.0/input/input5
[ 26.513717] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:13.1-3.1/input0
[ 26.513908] usbcore: registered new interface driver usbhid
[ 26.513935] usbhid: v2.6:USB HID core driver
[ 26.578400] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-3/3-3.4/3-3.4:1.0/input/input6
[ 26.581135] a4tech 0003:09DA:000A.0002: input,hidraw1: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:13.1-3.4/input0
[ 26.798062] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 26.821932] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 27.012760] lp: driver loaded but no devices found
[ 27.132592] Adding 2104444k swap on /dev/sdb6. Priority:-1 extents:1 across:2104444k
[ 27.144366] Adding 1469936k swap on /dev/sdc2. Priority:-2 extents:1 across:1469936k
[ 27.683089] EXT3 FS on sdb3, internal journal
[ 29.350297] type=1505 audit(1248351309.836:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2237
[ 29.405883] type=1505 audit(1248351309.892:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2241
[ 29.406027] type=1505 audit(1248351309.892:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2241
[ 29.406079] type=1505 audit(1248351309.892:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2241
[ 29.406129] type=1505 audit(1248351309.892:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2241
[ 29.571096] type=1505 audit(1248351310.056:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2246
[ 29.571313] type=1505 audit(1248351310.056:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2246
[ 29.602635] type=1505 audit(1248351310.088:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2250
[ 36.038499] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 36.426942] [drm] Initialized drm 1.1.0 20060810
[ 36.648326] pci 0000:01:00.0: setting latency timer to 64
[ 36.648517] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 37.091580] [drm] Setting GART location based on new memory map
[ 37.092274] [drm] Loading R500 Microcode
[ 37.092303] [drm] Num pipes: 1
[ 37.092310] [drm] writeback test succeeded in 1 usecs
[ 40.513095] skge eth1: enabling interface
[ 40.516592] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 40.519739] sky2 eth0: enabling interface
[ 40.519960] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.629098] sr2: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[ 41.629110] sr: Sense Key : No Sense [current]
[ 41.629114] sr: Add. Sense: No additional sense information
[ 42.035105] sr2: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[ 42.035117] sr: Sense Key : No Sense [current]
[ 42.035121] sr: Add. Sense: No additional sense information
[ 42.979183] skge eth1: Link is up at 1000 Mbps, full duplex, flow control both
[ 42.979414] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 53.604022] eth1: no IPv6 routers present
[ 62.503943] cdrom: sr0: mrw address space DMA selected
[ 62.707164] cdrom: sr0: mrw address space DMA selected
[ 62.985690] UDF-fs: No VRS found
[ 63.038097] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 63.071992] ISOFS: changing to secondary root
[ 79.150122] kjournald starting. Commit interval 5 seconds
[ 79.150650] EXT3 FS on sda3, internal journal
[ 79.150658] EXT3-fs: mounted filesystem with ordered data mode.
[ 102.993027] usb 2-4: reset full speed USB device using ohci_hcd and address 2
[ 7465.601843] type=1505 audit(1248358666.028:10): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=5758
[ 7465.661907] type=1505 audit(1248358666.088:11): operation="profile_replace" name="/sbin/dhclient-script" name2="default" pid=5762
[ 7465.662220] type=1505 audit(1248358666.088:12): operation="profile_replace" name="/sbin/dhclient3" name2="default" pid=5762
[ 7465.662279] type=1505 audit(1248358666.088:13): operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=5762
[ 7465.662333] type=1505 audit(1248358666.088:14): operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=5762
[ 7465.698946] type=1505 audit(1248358666.124:15): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=5767
[ 7465.863412] type=1505 audit(1248358666.288:16): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=5771
[ 7465.863789] type=1505 audit(1248358666.288:17): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=5771
[ 7465.903827] type=1505 audit(1248358666.328:18): operation="profile_replace" name="/usr/sbin/tcpdump" name2="default" pid=5775
[13741.156016] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x306f000a
[13742.160017] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x306f000a
[18110.711706] sr1: CDROM not ready. Make sure there is a disc in the drive.
[18111.267170] [drm] Num pipes: 1
[18116.462173] [drm] Num pipes: 1
[160778.044016] Clocksource tsc unstable (delta = 62507630 ns)
[165403.739992] cdrom: sr0: mrw address space DMA selected
[165415.998308] end_request: I/O error, dev fd0, sector 0
[165428.172672] end_request: I/O error, dev fd0, sector 0
[165428.211297] sr2: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[165428.211310] sr: Sense Key : No Sense [current]
[165428.211314] sr: Add. Sense: No additional sense information
[165428.225299] sr2: CDROM (ioctl) error, command: Get configuration 46 00 00 28 00 00 00 00 10 00
[165428.225311] sr: Sense Key : No Sense [current]
[165428.225315] sr: Add. Sense: No additional sense information
[165428.239307] sr2: CDROM (ioctl) error, command: Get configuration 46 00 00 20 00 00 00 00 18 00
[165428.239319] sr: Sense Key : No Sense [current]
[165428.239323] sr: Add. Sense: No additional sense information
[165428.281308] sr2: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[165428.281322] sr: Sense Key : No Sense [current]
[165428.281326] sr: Add. Sense: No additional sense information
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
OpenGL vendor string: DRI R300 Project
OpenGL renderer string: Mesa DRI R300 20060815 x86/MMX+/3DNow!+/SSE2 TCL
OpenGL version string: 1.3 Mesa 7.4
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_fragment_program, GL_ARB_imaging,
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_point_parameters,
GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_MESAX_texture_float, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_compiled_vertex_array, GL_EXT_convolution,
GL_EXT_copy_texture, GL_EXT_draw_range_elements,
GL_EXT_gpu_program_parameters, GL_EXT_histogram, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
GL_APPLE_packed_pixels, GL_ATI_blend_equation_separate,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
16 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6d 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x6e 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x6f 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x70 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x71 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x72 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x73 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x74 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x75 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x76 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x77 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x78 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x79 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5c 32 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
16 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x5d 0 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x5e 0 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x5f 0 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x60 0 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x61 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x62 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x63 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x64 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x65 0 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x66 0 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x67 0 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x68 0 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x69 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6a 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x6b 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
Launchpad really messes those tables up, do you want me to tidy them up?
Thanks AP :)
Regards from
Tom :)
--
You received this question notification because you are a member of UF
Unanswered Posts Team, which is an answer contact for Ubuntu.
