ubuntustudio-bugs team mailing list archive

[Chris Chiu <2073552@xxxxxxxxxxxxxxxxxx>]

** Description changed:

  [SRU Justifications]
  
  [Impact]
  Modern Intel platforms (RPL, MTL, LNL...etc) connect audio codecs on Soundwire instead of HDA, but the soundwire devices are not well reflected on the alsa-info report. In order to meet the increasing demands for SoundWire debugging, we must enable alsa-info to provide more information about SoundWire.
  
  [Fix]
- Backport the upstream commit cc0bcef81389 ("alsa-info.sh: log SoundWire devices reported in ACPI"). The reported information can reflect which soundwire devices are connected and which soundware link the device connects to. It's quite sufficient for what driver should be ready and what tplg/firmware file should be loaded. 
+ Backport the upstream commit cc0bcef81389 ("alsa-info.sh: log SoundWire devices reported in ACPI") of v1.2.12. The Oracular is expected to sync with v1.2.12 and we may not have to backport to Oracular. The reported information can reflect which soundwire devices are connected and which soundware link the device connects to. It's quite sufficient for what driver should be ready and what tplg/firmware file should be loaded.
  
  [Test Case]
- 1. Find a machine with (RTK/Cirrus/TI) Soundwire audio device. 
+ 1. Find a machine with (RTK/Cirrus/TI) Soundwire audio device.
  2. Install the new alsa-utils debian package
  3. Execute `alsa-info` to generate the report
- 4. Check if the section "ACPI SoundWire Device Status Information" exists in the output report. 
+ 4. Check if the section "ACPI SoundWire Device Status Information" exists in the output report.
  
  [Where problems could occur]
  It's simply an additional soundwire information when ACPI exposed the soundwire device. The risk for regression is low.
+ 
+ [Other Info]
+ Verify if the official Oracular starts from version v1.2.12 to determine if we have to land it on Oracular.

-- 
You received this bug notification because you are a member of Ubuntu
Studio Bugs, which is subscribed to alsa-utils in Ubuntu.
Matching subscriptions: Ubuntu Studio Bugs
https://bugs.launchpad.net/bugs/2073552

Title:
  Add SoundWire devices to alsa-info reported in ACPI

Status in alsa-utils package in Ubuntu:
  New
Status in alsa-utils source package in Jammy:
  In Progress
Status in alsa-utils source package in Noble:
  In Progress

Bug description:
  [SRU Justifications]

  [Impact]
  Modern Intel platforms (RPL, MTL, LNL...etc) connect audio codecs on Soundwire instead of HDA, but the soundwire devices are not well reflected on the alsa-info report. In order to meet the increasing demands for SoundWire debugging, we must enable alsa-info to provide more information about SoundWire.

  [Fix]
  Backport the upstream commit cc0bcef81389 ("alsa-info.sh: log SoundWire devices reported in ACPI") of v1.2.12. The Oracular is expected to sync with v1.2.12 and we may not have to backport to Oracular. The reported information can reflect which soundwire devices are connected and which soundware link the device connects to. It's quite sufficient for what driver should be ready and what tplg/firmware file should be loaded.

  [Test Case]
  1. Find a machine with (RTK/Cirrus/TI) Soundwire audio device.
  2. Install the new alsa-utils debian package
  3. Execute `alsa-info` to generate the report
  4. Check if the section "ACPI SoundWire Device Status Information" exists in the output report.

  [Where problems could occur]
  It's simply an additional soundwire information when ACPI exposed the soundwire device. The risk for regression is low.

  [Other Info]
  Verify if the official Oracular starts from version v1.2.12 to determine if we have to land it on Oracular.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-utils/+bug/2073552/+subscriptions