← Back to team overview

yade-dev team mailing list archive

[Bug 1790167] Re: JCFPM: "neverErase" modifies the simulated behavior while it should not

 

>Can we have 2 interactions (in the interaction container") which
concerns the same particles pair?

Impossible.

> keep record of the crack aperture [...] during the whole duration of
the simulation.

Saying that we erase when distance > 10*radius would surely enough keep it alive for the whole (typical) DFNFlow simulation.
On the other hand if one day some particles are moving apart by more than 10*radius (possibly without DFNFlow) because there is sliding along a fracture plane it makes no sense to keep the corresponding interaction. The "10" factor should be a user defined variable, of course.

Bruno

-- 
You received this bug notification because you are a member of Yade
developers, which is subscribed to Yade.
https://bugs.launchpad.net/bugs/1790167

Title:
  JCFPM: "neverErase" modifies the simulated behavior while it should
  not

Status in Yade:
  New

Bug description:
  I noticed that running the exact same simulation (with same initial
  packing) gives different behaviors (stress-strain response in, e.g., a
  compression test) when neverErase is True or False. Given the purpose
  of neverErase (keep record of broken contacts, primarily for DFNFlow),
  it should not. The difference can be more or less important depending
  on the situation but it always exists. I could not figure out the
  cause of this yet but it seems that it comes from the treatment of
  broken contacts (obviously).

  Here is a simulation (uniaxial compression) that illustrates the
  problem. Running the same script using the exact same sample (to make
  sure the error does not come from a difference in the packings used)
  with either neverErase=True or neverErase=False produces 2 stress-
  strain curves which deviate at some point during the simulation. I
  made sure that the error is only due to neverErase by running the same
  simulations several times. The curves obtained with neverErase=True
  are always identical, as the curves obtained with neverErase=False.
  For those who would be interested, I also attach a packing  and the
  python script to plot the curves (below the simulation script).

  
  ### yade script ###

  
  from yade import ymport, pack, plot                                 

  #### material definition
  def sphereMat(): return JCFpmMat(type=1,density=3000,young=1e9,poisson=0.2,tensileStrength=1e6,cohesion=10e6,frictionAngle=radians(30))

  ##### create the specimen
  #L=0.10
  #D=0.05
  #pred=pack.inCylinder((0,0,0),(0,0,L),D/2.)
  #O.bodies.append(pack.regularHexa(pred,radius=D/20.,gap=0.,material=sphereMat)) 
  #O.bodies.append(pack.randomDensePack(pred,radius=D/20.,rRelFuzz=0.4,spheresInCell=1000,memoizeDb='/tmp/gts-triax-packings.sqlite',returnSpherePack=False,color=(0.9,0.8,0.6),material=sphereMat))

  #### import the specimen
  O.bodies.append(ymport.text('121_3k.spheres',scale=1.,shift=Vector3(0,0,0),material=sphereMat))

  #### help define boundary conditions (see utils.uniaxialTestFeatures)
  bb=utils.uniaxialTestFeatures()
  negIds,posIds,longerAxis,crossSectionArea=bb['negIds'],bb['posIds'],bb['axis'],bb['area']

  ################# DEM loop + ENGINES DEFINED HERE

  O.engines=[
   ForceResetter(),
          InsertionSortCollider([Bo1_Sphere_Aabb(aabbEnlargeFactor=1.2,label='Saabb')]),
   InteractionLoop(
    [Ig2_Sphere_Sphere_ScGeom(interactionDetectionFactor=1.2,label='SSgeom')],
    [Ip2_JCFpmMat_JCFpmMat_JCFpmPhys(cohesiveTresholdIteration=1,label='interactionPhys')],
    [Law2_ScGeom_JCFpmPhys_JointedCohesiveFrictionalPM(neverErase=False,label='interactionLaw')]
   ),
   UniaxialStrainer(strainRate=-0.01,axis=longerAxis,asymmetry=0,posIds=posIds,negIds=negIds,crossSectionArea=crossSectionArea,blockDisplacements=1,blockRotations=1,setSpeeds=0,stopStrain=0.1,dead=1,label='strainer'),
   GlobalStiffnessTimeStepper(active=1,timeStepUpdateInterval=10,timestepSafetyCoefficient=0.8,defaultDt=utils.PWaveTimeStep()),
   NewtonIntegrator(damping=0.4,label='newton'),
   PyRunner(iterPeriod=int(100),initRun=True,command='recorder()',label='data'),
  ]

  ################# RECORDER DEFINED HERE

  def recorder():
      yade.plot.addData({'i':O.iter,
                         'eps':strainer.strain,
                         'sigma':strainer.avgStress,
                         'tc':interactionLaw.nbTensCracks,
                         'sc':interactionLaw.nbShearCracks,
                         'te':interactionLaw.totalTensCracksE,
                         'se':interactionLaw.totalShearCracksE,
                         'unbF':utils.unbalancedForce()})
      plot.saveDataTxt('compressionTest_1')

  ################# PREPROCESSING

  #### manage interaction detection factor during the first timestep and then set default interaction range
  O.step();
  ### initializes the interaction detection factor
  SSgeom.interactionDetectionFactor=-1.
  Saabb.aabbEnlargeFactor=-1.

  ################# SIMULATION REALLY STARTS HERE
  strainer.dead=0
  O.run(50000)


  ### python script ###

  
  # -*- coding: utf-8 -*-
  from pylab import *

  ### processing function
  def store(var,textFile):
      data=loadtxt(textFile,skiprows=1)
      it=[]
      e=[]
      s=[]
      tc=[]
      sc=[]
      uf=[]
      for i in range(0,len(data)):
        it.append(float(data[i,1]))
        e.append(-float(data[i,0]))
        s.append(-float(data[i,4]))
        tc.append(float(data[i,5]))
        sc.append(float(data[i,2]))
        uf.append(float(data[i,7]))
      var.append(it)
      var.append(e)
      var.append(s)
      var.append(tc)
      var.append(sc)
      var.append(uf)
     
  ### data input
  dataFile1='compressionTest'
  a1=[]
  store(a1,dataFile1)

  dataFile2='compressionTest_neverErase'
  a2=[]
  store(a2,dataFile2)

  rcParams.update({'legend.numpoints':1,'font.size':20,'axes.labelsize':28,'xtick.major.pad':10,'ytick.major.pad':10,'legend.fontsize':18})

  figure(1,figsize=(10,10))
  xlabel(r'$\epsilon_1$ [millistrain]')
  #axis(xmax=0.1)
  plot([x*1e3 for x in a1[1]],[x/1e6 for x in a1[2]],'-k',linewidth=2)
  plot([x*1e3 for x in a2[1]],[x/1e6 for x in a2[2]],'-r',linewidth=2)
  ylabel(r'$\sigma_1$ [MPa]')
  axis(ymin=0)
  #savefig(dataFile1+'_qVSeps.eps',dpi=1000,format='eps',transparent=False)

  ### show
  show()

To manage notifications about this bug go to:
https://bugs.launchpad.net/yade/+bug/1790167/+subscriptions


References