← Back to team overview

yade-users team mailing list archive

Re: [Question #199514]: Periodic triaxial test example in chapter 2 does not work

 

Question #199514 on Yade changed:
https://answers.launchpad.net/yade/+question/199514

Summary changed to:
Periodic triaxial test example  in chapter 2 does not work

Description changed to:
Hello,
Periodic triaxial test examplein chapter 2 (Tutorial) does not work.

------------when I use yade 0.70 it gives the message as fllow:
yade.plot: creating new line for kinetic
yade.plot: creating new line for elastPotential
yade.plot: creating new line for nonviscDamp
yade.plot: creating new line for velGradWork
yade.plot: creating new line for plastDissip
FATAL /build/buildd/yade-0.70.0/core/ThreadRunner.cpp:31 run: Exception occured: 
Body #270 has velocity==NaN!

------------when I use yade 0.80 it gives the message as fllow:(Yade 0.80.0+1+9~precise1, from 2012-05-04
)

Yade [1]: FATAL /build/buildd/yade-stable-0.80.0+1+9~precise1/core/ThreadRunner.cpp:31 run: Exception occured: 
PeriTriaxController run on aperiodic simulation.
yade.plot: creating new line for kinetic
yade.plot: creating new line for nonviscDamp


the scripts is  in 2.6.6 Periodic triaxial test in yade document , for easy, list as fllowing:


----------------------------------begin
# encoding: utf-8

# periodic triaxial test simulation
#
# The initial packing is either
#
# 1. random cloud with uniform distribution, or
# 2. cloud with specified granulometry (radii and percentages), or
# 3. cloud of clumps, i.e. rigid aggregates of several particles
#
# The triaxial consists of 2 stages:
#
# 1. isotropic compaction, until sigmaIso is reached in all directions;
#    this stage is ended by calling compactionFinished() 
# 2. constant-strain deformation along the z-axis, while maintaining 
#    constant stress (sigmaIso) laterally; this stage is ended by calling
#    triaxFinished()
# 
# Controlling of strain and stresses is performed via PeriTriaxController,
# of which parameters determine type of control and also stability
# condition (maxUnbalanced) so that the packing is considered stabilized
# and the stage is done.
#

sigmaIso=-1e5

#import matplotlib
#matplotlib.use('Agg')

# generate loose packing
from yade import pack, qt, plot
sp=pack.SpherePack()
if 0:
   ## uniform distribution
   sp.makeCloud((0,0,0),(2,2,2),rMean=.1,rRelFuzz=.3,periodic=True)
elif 0:
   ## per-fraction distribution
   ## passing: cummulative percentage
   sp.particleSD2(radii=[.09,.1,.2],passing=[40,80,100],periodic=True,numSph=1000)
else:
   ## create packing from clumps
   # configuration of one clump
   c1=pack.SpherePack([((0,0,0),.1),((.15,0,0),.05),((0,.1,0),.05)])
   # make cloud using the configuration c1 (there could c2, c3, ...; selection between them would be random)
   sp.makeClumpCloud((0,0,0),(2,2,2),[c1],periodic=True)

# setup periodic boundary, insert the packing
sp.toSimulation()

O.engines=[
   ForceResetter(),
   InsertionSortCollider([Bo1_Sphere_Aabb()]),
   InteractionLoop(
      [Ig2_Sphere_Sphere_L3Geom()],
      [Ip2_FrictMat_FrictMat_FrictPhys()],
      [Law2_L3Geom_FrictPhys_ElPerfPl()]
   ),
   NewtonIntegrator(damping=.6),
   PeriTriaxController(label='triax',
      # specify target values and whether they are strains or stresses
      goal=(sigmaIso,sigmaIso,sigmaIso),stressMask=7,
      # type of servo-control
      dynCell=True,maxStrainRate=(.1,.1,.1),
      # wait until the unbalanced force goes below this value
      maxUnbalanced=.1,relStressTol=1e-3,
      # call this function when goal is reached and the packing is stable
      doneHook='compactionFinished()'
   ),
   PyRunner(command='addPlotData()',iterPeriod=100),
]
O.dt=.5*utils.PWaveTimeStep()

def addPlotData():
   plot.addData(unbalanced=utils.unbalancedForce(),i=O.iter,
      sxx=triax.stress[0],syy=triax.stress[1],szz=triax.stress[2],
      exx=triax.strain[0],eyy=triax.strain[1],ezz=triax.strain[2],
      # save all available energy data
      Etot=O.energy.total(),**O.energy
   )

# enable energy tracking in the code
O.trackEnergy=True

# define what to plot
plot.plots={'i':('unbalanced',),'i ':('sxx','syy','szz'),' i':('exx','eyy','ezz'),
   # energy plot
   ' i ':(O.energy.keys,None,'Etot'),
}
# show the plot
plot.plot()

def compactionFinished():
   # set the current cell configuration to be the reference one
   O.cell.trsf=Matrix3.Identity
   # change control type: keep constant confinement in x,y, 20% compression in z
   triax.goal=(sigmaIso,sigmaIso,-.3)
   triax.stressMask=3
   # allow faster deformation along x,y to better maintain stresses
   triax.maxStrainRate=(1.,1.,.1)
   # next time, call triaxFinished instead of compactionFinished
   triax.doneHook='triaxFinished()'
   # do not wait for stabilization before calling triaxFinished
   triax.maxUnbalanced=10

def triaxFinished():
   print 'Finished'
   O.pause()

-------------------------------------------------------end

-- 
You received this question notification because you are a member of
yade-users, which is an answer contact for Yade.