yade-users team mailing list archive

[gholamreza esmaeili <question680164@xxxxxxxxxxxxxxxxxxxxx>]

New question #680164 on Yade:
https://answers.launchpad.net/yade/+question/680164

I use two phase flow engine to simulate an unsaturated oedometer test,I need the value of pore water pressure and pore air pressure at some specific time(or point) ,how to get this two value in unsaturated oedometer test?


###################################
import matplotlib; matplotlib.rc('axes',grid=True)
from yade import pack
import pylab
from numpy import *

utils.readParamsFromTable(seed=1,num_spheres=1000,compFricDegree = 15.0)
from yade.params import table

seed=table.seed
num_spheres=table.num_spheres# number of spheres
compFricDegree = table.compFricDegree # initial contact friction during the confining phase (will be decreased during the REFD compaction process)
confiningS=-1e5

## creat a packing with a specific particle side distribution (PSD)
psdSizes,psdCumm=[.599,0.6,0.849,0.85,1.0,1.40],[0.,0.35,0.35,0.70,.70,1.]
sp=pack.SpherePack()
mn,mx=Vector3(0,0,0),Vector3(10,10,10)
sp.makeCloud(minCorner=mn,maxCorner=mx,psdSizes=psdSizes,psdCumm=psdCumm,distributeMass=True,num=num_spheres,seed=seed)

## create material #0, which will be used as default
O.materials.append(FrictMat(young=15e7,poisson=.4,frictionAngle=radians(compFricDegree),density=2600,label='spheres'))
O.materials.append(FrictMat(young=15e7,poisson=.4,frictionAngle=0,density=0,label='frictionless'))

## create walls around the packing
walls=aabbWalls((mn,mx),thickness=0,material='frictionless')
wallIds=O.bodies.append(walls)

O.bodies.append([utils.sphere(center,rad,material='spheres') for center,rad in sp])

triax=TriaxialStressController(
	internalCompaction=True,
	goal1=confiningS,
	goal2=confiningS,
	goal3=confiningS,
	max_vel=10,
	label="triax"
)

newton=NewtonIntegrator(damping=0.4)

O.engines=[
	ForceResetter(),
	InsertionSortCollider([Bo1_Sphere_Aabb(),Bo1_Box_Aabb()]),
	InteractionLoop(
		[Ig2_Sphere_Sphere_ScGeom(),Ig2_Box_Sphere_ScGeom()],
		[Ip2_FrictMat_FrictMat_FrictPhys()],
		[Law2_ScGeom_FrictPhys_CundallStrack()]
	),
	GlobalStiffnessTimeStepper(active=1,timeStepUpdateInterval=100,timestepSafetyCoefficient=0.8),
	triax,
	newton
]

while 1:
  O.run(1000,True)
  unb=unbalancedForce()
  if unb<0.01 and abs(triax.goal1-triax.meanStress)/abs(triax.goal1)<0.001:
    break

#############################
##   REACH NEW EQU. STATE ###
#############################
finalFricDegree = 30 # contact friction during the deviatoric loading

#We move to deviatoric loading, let us turn internal compaction off to keep particles sizes constant
triax.internalCompaction=False
# Change contact friction (remember that decreasing it would generate instantaneous instabilities)
setContactFriction(radians(finalFricDegree))

while 1:
  O.run(1000,True)
  unb=unbalancedForce()
  if unb<0.001 and abs(triax.goal1-triax.meanStress)/abs(triax.goal1)<0.001:
    break  

triax.depth0=triax.depth
triax.height0=triax.height
triax.width0=triax.width
O.save('1kPacking.yade') #save the packing, which can be reloaded later.

O.run(1000,True)
ei0=-triax.strain[0];ei1=-triax.strain[1];ei2=-triax.strain[2]
si0=-triax.stress(0)[0];si1=-triax.stress(2)[1];si2=-triax.stress(4)[2]

from yade import plot
O.engines=O.engines+[PyRunner(iterPeriod=20,command='history()',dead=1,label='recorder')]

def history():
  	plot.addData(e11=-triax.strain[0]-ei0, e22=-triax.strain[1]-ei1, e33=-triax.strain[2]-ei2,
		    s11=-triax.stress(0)[0]-si0,
		    s22=-triax.stress(2)[1]-si1,
		    s33=-triax.stress(4)[2]-si2,
		    pc=-unsat.bndCondValue[2],
		    sw=unsat.getSaturation(False),
		    i=O.iter
		    )

plot.plots={'pc':('sw',None,'e22')}
plot.plot()

#######################################################
##     Drainage Test under oedometer conditions     ###
#######################################################
##oedometer conditions
triax.stressMask=2
triax.goal1=triax.goal3=0
goalTop=triax.stress(3)[1]
triax.goal2=goalTop
triax.wall_bottom_activated=0
recorder.dead=0

##Instantiate a two-phase engine
unsat=TwoPhaseFlowEngine()
meanDiameter=(O.bodies[-1].shape.radius + O.bodies[6].shape.radius) / 2.

##set boundary conditions, the drainage is controlled by decreasing W-phase pressure and keeping NW-phase pressure constant
unsat.bndCondIsPressure=[0,0,1,1,0,0]
unsat.bndCondValue=[0,0,-1e8,0,0,0]
unsat.isPhaseTrapped=True #the W-phase can be disconnected from its reservoir
unsat.initialization()
unsat.surfaceTension = 10

##start invasion, the data of normalized pc-sw-strain will be written into pcSwStrain.txt
file=open('pcSwStrain.txt',"w")
for pg in arange(1.0e-5,15.0,0.1):
  #increase gaz pressure at the top boundary
  unsat.bndCondValue=[0,0,(-1.0)*pg*unsat.surfaceTension/meanDiameter,0,0,0]
  #compute the evolution of interfaces
  unsat.invasion()
  #save the phases distribution in vtk format, to be displayed by paraview
  unsat.savePhaseVtk("./")
  #compute and apply the capillary forces on each particle
  unsat.computeCapillaryForce()
  for b in O.bodies:
    O.forces.setPermF(b.id, unsat.fluidForce(b.id))
  #reac
  while 1:
    O.run(1000,True)
    unb=unbalancedForce()
    if unb<0.01:
      break
  file.write(str(pg)+" "+str(unsat.getSaturation(False))+" "+str(triax.strain[1]-ei1)+"\n")
file.close()

-- 
You received this question notification because your team yade-users is
an answer contact for Yade.