yahoo-eng-team team mailing list archive
-
yahoo-eng-team team
-
Mailing list archive
-
Message #67913
[Bug 1657940] Re: eni rendering dhcp6 writes aliases fails to bring up dhcp6
This bug is believed to be fixed in cloud-init in 17.1. If this is still
a problem for you, please make a comment and set the state back to New
Thank you.
** Changed in: cloud-init
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Yahoo!
Engineering Team, which is subscribed to cloud-init.
https://bugs.launchpad.net/bugs/1657940
Title:
eni rendering dhcp6 writes aliases fails to bring up dhcp6
Status in cloud-init:
Fix Released
Status in cloud-init package in Ubuntu:
Fix Released
Status in cloud-init source package in Xenial:
Fix Released
Status in cloud-init source package in Yakkety:
Fix Released
Bug description:
=== Begin SRU Template ===
[Impact]
cloud-init rendered ENI (/etc/network/interfaces) configuration using
"aliases" (eth0:1). That fails in some scenarios to bring up all interfaces
on boot.
Most specifically problematic is dhcp with ipv4 and dhcp with ipv6.
In that case ipv6 dhcp just would not come up on boot.
[Test Case]
There are unit tests to verify that the new network configuration
is written as expected. Additionally, this is now using the same
ENI rendering format that curtin uses, which has good test cases
in its 'vmtest'.
[Regression Potential]
Users who had done:
ifup eth0:1
will no longer be able to do that. However now this will reliably work:
ifup eth0
to bring up all ip addresses on eth0.
=== End SRU Template ===
Currently, a config like this:
| version: 1
| config:
| - 'type': 'physical'
| 'name': 'iface0'
| 'subnets':
| - {'type': 'dhcp4'}
| - {'type': 'dhcp6'}
Will render:
| auto lo
| iface lo inet loopback
|
| auto iface0
| iface iface0 inet dhcp
| post-up ifup iface0:1
|
|
| auto iface0:1
| iface iface0:1 inet6 dhcp
Below is an example test case that shows the output.
Heres the problem:
$ sudo sh -c 'ifdown eth0; ifup eth0'
$ sudo sh -c 'ifdown eth0; ifup eth0'
Killed old client process
Internet Systems Consortium DHCP Client 4.3.3
Copyright 2004-2015 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/eth0/06:b3:0a:3a:2d:e3
Sending on LPF/eth0/06:b3:0a:3a:2d:e3
Sending on Socket/fallback
DHCPRELEASE on eth0 to 172.31.16.1 port 67 (xid=0x32b625f1)
Internet Systems Consortium DHCP Client 4.3.3
Copyright 2004-2015 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/eth0/06:b3:0a:3a:2d:e3
Sending on LPF/eth0/06:b3:0a:3a:2d:e3
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 (xid=0xa4d5f301)
DHCPREQUEST of 172.31.29.161 on eth0 to 255.255.255.255 port 67 (xid=0x1f3d5a4)
DHCPOFFER of 172.31.29.161 from 172.31.16.1
DHCPACK of 172.31.29.161 from 172.31.16.1
bound to 172.31.29.161 -- renewal in 1801 seconds.
Failed to bring up eth0:1.
Failed to bring up eth0.
$ sudo ifup -v eth0:1
Parsing file /etc/network/interfaces.d/50-cloud-init.cfg
Parsing file /etc/network/interfaces.d/60-ipv6.cfg
Configuring interface eth0:1=eth0:1 (inet6)
/bin/run-parts --exit-on-error --verbose /etc/network/if-pre-up.d
run-parts: executing /etc/network/if-pre-up.d/ethtool
run-parts: executing /etc/network/if-pre-up.d/ifenslave
+ [ inet6 = meta ]
+ IF_BOND_SLAVES=
+ [ ]
+ [ ]
+ [ -z ]
+ exit
run-parts: executing /etc/network/if-pre-up.d/vlan
/sbin/modprobe -q net-pf-10 > /dev/null 2>&1 || true # ignore failure.
/sbin/sysctl -q -e -w net.ipv6.conf.eth0:1.accept_ra=1
/bin/ip link set dev eth0:1 up
/lib/ifupdown/wait-for-ll6.sh
/sbin/dhclient -1 -6 -pf /run/dhclient6.eth0:1.pid -lf /var/lib/dhcp/dhclient6.eth0:1.leases -I -df /var/lib/dhcp/dhclient.eth0:1.leases eth0:1
--- a/tests/unittests/test_net.py
+++ b/tests/unittests/test_net.py
@@ -813,6 +813,27 @@ class TestEniRoundTrip(TestCase):
self.assertEqual(
expected, [line for line in found if line])
+ def test_dhcp4_and_dhcp6(self):
+ conf = yaml.load(textwrap.dedent("""\
+ version: 1
+ config:
+ - 'type': 'physical'
+ 'name': 'iface0'
+ 'subnets':
+ - {'type': 'dhcp4'}
+ - {'type': 'dhcp6'}
+ """))
+
+ #conf = [
+ # {'type': 'physical', 'name': 'iface0',
+ # 'subnets': [
+ # {'type': 'dhcp4'},
+ # {'type': 'dhcp6'},
+ # ]},
+ #]
+ files = self._render_and_read(network_config=conf)
+ raise Exception(files['/etc/network/interfaces'])
+
To manage notifications about this bug go to:
https://bugs.launchpad.net/cloud-init/+bug/1657940/+subscriptions
References