yahoo-eng-team team mailing list archive

[Scott Moser <smoser@xxxxxxxxxx>]

This bug is believed to be fixed in cloud-init in 17.1. If this is still
a problem for you, please make a comment and set the state back to New

Thank you.

** Changed in: cloud-init
       Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Yahoo!
Engineering Team, which is subscribed to cloud-init.
https://bugs.launchpad.net/bugs/1695092

Title:
  sysconfig only applies subnet/route config to physical interfaces

Status in cloud-init:
  Fix Released

Bug description:
  cloud-init master

  Testing bridging configuration.  First, empty subnets break sysconfig
  rendering; this has been reported in other bugs), after that, the
  resulting ifcfg-br0 does not include the static network configuration.
  Upon closer examination the _render_interface_subnets and routes is
  only called in the _render_physical_interface code.  Instead, this
  should be called on *any* interface as we can configure subnets and
  routes on vlans or bridges, bonds, etc.

  % cat bridge.yaml
  network:
      version: 1
      config:
          - type: physical
            name: eth0
            mac_address: "52:54:00:12:34:00"
            subnets:
                - type: dhcp4
          - type: physical
            name: eth1
            mac_address: "52:54:00:12:34:02"
          - type: physical
            name: eth2
            mac_address: "52:54:00:12:34:04"
          - type: bridge
            name: br0
            bridge_interfaces:
              - eth1
              - eth2
            params:
                bridge_ageing: 250
                bridge_bridgeprio: 22
                bridge_fd: 1
                bridge_gcint: 2
                bridge_hello: 1
                bridge_maxage: 10
                bridge_maxwait: 0
                bridge_pathcost:
                  - eth1 50
                  - eth2 75
                bridge_portprio:
                  - eth1 28
                  - eth2 14
                bridge_stp: 'off'
                bridge_waitport:
                  - 1 eth1
                  - 2 eth2
            subnets:
                - type: static
                  address: 192.168.14.2/24

  After fixing the empty subnet issue, we can see in net-convert rendering of ifcfg-br0 is missing
  the 192.168.14.2/24 address.

  % cat target-sysconfig/etc/sysconfig/network-scripts/ifcfg-br0 
  # Created by cloud-init on instance boot automatically, do not edit.
  #
  AGEING=250
  BOOTPROTO=none
  DEVICE=br0
  NM_CONTROLLED=no
  ONBOOT=yes
  PRIO=22
  STP=off
  TYPE=Bridge
  USERCTL=no

To manage notifications about this bug go to:
https://bugs.launchpad.net/cloud-init/+bug/1695092/+subscriptions