ac100 team mailing list archive

[Jasper Taylor <jasper@xxxxxxxxxxxxxxx>]

On 03/04/12 18:39, Marc Dietrich wrote:
> On Tuesday 03 April 2012 16:55:08 Jasper Taylor wrote:
> > >  On 02/04/12 18:37, Marc Dietrich wrote:
> > > >  >  On Monday 02 April 2012 16:37:41 Tomáš Vaculín wrote:
> > > > > >  >>  >    Hi Marc,
> > > > > >  >>  >  
> > > > > >  >>  >    Attached please find whole kern.log from last run when the problem occurred.
> > > > > >  >>  >  
> > > > > >  >>  >    Except start of the system I found this:
> > > > > >  >>  >    Apr  2 15:15:45 ac100 kernel: [ 3707.346624] nvec nvec.0: unexpected status
> > > > > >  >>  >    flags 0x18 during state 1
> > > > > >  >>  >
> > > > > >  >>  >    Kernel version is 3.0.19-2-ac100
> > > >  >  yes, I also saw this. Could be harmless or the source of the problems, hard to predict ...
> > > >  >
> > > >  >  But you can put something like this into your /etc/rc.local:
> > > >  >
> > > >  >  	echo 16384>   /proc/sys/vm/min_free_kbytes
> > > >  >
> > > >  >  to get rid of the wifi warnings.
> > > >  >
> > > >  >  A limited emergency pool can also be a reason for lost nvec packages.
> > > >  >
> > > >  >  Marc
> > > >  >
> > >  I tried this and it had no effect. I have the 10U version.
> please check  /proc/sys/vm/min_free_kbytes after reboot.
> If it does not contain 16386, please do a chmod +x /etc/rc.local. Several people have
> reported that doing this solved the problem for them (until now). Here is my rc.local btw:
Already checked that -- just tried it again after installing all current 
upgrades and rebooting, still no touchpad action. I also have a line to 
rfkill bluetooth in my /etc/rc.local and that works fine. Any logs I 
should look at?
    --J