ac100 team mailing list archive
-
ac100 team
-
Mailing list archive
-
Message #01128
Re: Tegra Binary Driver and Memory Carve-Out
On Wed, 25 Sep 2013 13:47:25 +0400, Andrey Danin
<andrey.danin@xxxxxxxxx> wrote:
On Wed, 2013-09-25 at 10:10 +0100, Gordan Bobic wrote:
The default Tegra memory carve-out is 64MB. But my
Xorg.0.log says:
(--) TEGRA(0): VideoRAM: 32768 kByte
tegra_drv.so does not understand a "VideoRAM" option.
I tried experimenting with reclaiming some memory from
the top 64MB with the Tegra driver loaded, and Xorg
crashes instantly if this is attempted (62MB memory
reclaim works fine with fbdev_drv.so).
Does anybody know what is eating those other 32MB of
RAM if the tegra_drv.so is only using 32MB? I tried
playign with the nvmem parameter but that seems to
get ignored on everything but the most ancient of AC100
kernels.
Not that I think it's relevant since it is a fairly low
level tegra memory usage map question, but here goes:
What is your kernel version?
2.6.38.8 from my gitorious tree (includes 1280x720
screen patches and overclocking patches.
What cmdline do you use?
$ dmesg | grep "command line"
Kernel command line: vmalloc=320M video=tegrafb console=tty0 ro
usbcore.old_scheme_first=1 elevator=deadline zcache quiet
tegraboot=sdmmc
tegrapart=recovery:700:a00:800,boot:1100:1000:800,mbr:2100:200:800
What is tegra driver version ?
The latest available for soft-float distributions,
from Alpha 15-something release. Xorg ABI v10 (ABI v7
until yesterday).
Please post dmesg and xorg log.
Attached.
Gordan
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.8-1280-20130909-1 (root@xxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #2 SMP Tue Sep 10 12:20:48 BST 2013
CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Toshiba AC100 / Dynabook AZ
PreMemHdl 0 00000008 1c032000 00258000 00000009
FRAMEBUFFER 00000014 00010000 00258000 101a880a 02580400 02010800 00000007
DISPLAY 0000000c 00000000 00000000 0023af01 00000006
PreMemHdl 1 00000008 1c29c000 00002000 00000016
CHIPSHMOO 00000048 00010001 00000000 00000010 00000010 00000528 00000538 00000028
CHIPSHMOO 00000560 00000028 00000588 00000018 000005a0 00000028 00010000 fdfdfdfe
CHIPSHMOO 00000456 00000000 00000000 00000006
PreMemHdl 2 00000008 1c29e000 00002000 00000005
WARMBOOT 00000004 00010002 00000000
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 114688
free_area_init_node: node 0, pgdat c04f3fa0, node_mem_map c0536000
Normal zone: 896 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 113792 pages, LIFO batch:31
Tegra Revision: A02 SKU: 8 CPU Process: 1 Core Process: 0 Speedo ID: 0
PERCPU: Embedded 7 pages/cpu @c08ba000 s7584 r8192 d12896 u32768
pcpu-alloc: s7584 r8192 d12896 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
Kernel command line: vmalloc=320M video=tegrafb console=tty0 ro usbcore.old_scheme_first=1 elevator=deadline zcache quiet tegraboot=sdmmc tegrapart=recovery:700:a00:800,boot:1100:1000:800,mbr:2100:200:800
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 2293760 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 448MB = 448MB total
Memory: 445540k/445540k available, 13212k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xdc800000 - 0xfe000000 ( 536 MB)
lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0031000 ( 164 kB)
.text : 0xc0031000 - 0xc04b352c (4618 kB)
.data : 0xc04b4000 - 0xc04f5780 ( 262 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
NR_IRQS:448
Initial usec timer 6874909
sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop...
Switched to NOHz mode on CPU #0
1992.29 BogoMIPS (lpj=9961472)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
CPU: Testing write buffer coherency: ok
Calibrating local timer... 249.94MHz, setting to 2.50MHz.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
Brought up 2 CPUs
SMP: Total of 2 processors activated (3991.14 BogoMIPS).
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
host1x bus init
EMC table: ramd_id: 0, tegra_sku_id 8
EMC table: using Hynix 333MHz
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
hw-breakpoint: maximum watchpoint size is 4 bytes.
tegra_arb_init: initialized
tegra_iovmm_register: added iovmm-gart
bio: create slab <bio-0> at 0
vgaarb: loaded
i2c-core: driver [tps6586x] using legacy suspend method
i2c-core: driver [tps6586x] using legacy resume method
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
tps6586x 4-0034: VERSIONCRC is 05
tps6586x-regulator tps6586x-regulator.0: Probing regulator 0
print_constraints: REG-SM_0: 725 <--> 1500 mV at 1200 mV fast normal
tps6586x-regulator tps6586x-regulator.1: Probing regulator 1
print_constraints: REG-SM_1: 725 <--> 1500 mV at 1050 mV fast normal
tps6586x-regulator tps6586x-regulator.2: Probing regulator 2
print_constraints: REG-SM_2: 3000 <--> 3700 mV at 3700 mV fast normal
tps6586x-regulator tps6586x-regulator.3: Probing regulator 3
print_constraints: REG-LDO_0: 1250 <--> 3300 mV at 1250 mV fast normal
tps6586x-regulator tps6586x-regulator.4: Probing regulator 4
print_constraints: REG-LDO_1: 725 <--> 1100 mV at 1100 mV fast normal
tps6586x-regulator tps6586x-regulator.5: Probing regulator 5
print_constraints: REG-LDO_2: 725 <--> 1500 mV at 1200 mV fast normal
tps6586x-regulator tps6586x-regulator.6: Probing regulator 6
print_constraints: REG-LDO_3: 1250 <--> 3300 mV at 3300 mV fast normal
tps6586x-regulator tps6586x-regulator.7: Probing regulator 7
print_constraints: REG-LDO_4: 1700 <--> 1800 mV at 1800 mV fast normal
tps6586x-regulator tps6586x-regulator.8: Probing regulator 8
print_constraints: REG-LDO_5: 1250 <--> 2850 mV at 2850 mV fast normal
tps6586x-regulator tps6586x-regulator.9: Probing regulator 9
print_constraints: REG-LDO_6: 1250 <--> 2850 mV at 2850 mV fast normal
tps6586x-regulator tps6586x-regulator.10: Probing regulator 10
print_constraints: REG-LDO_7: 1250 <--> 3300 mV at 3300 mV fast normal
tps6586x-regulator tps6586x-regulator.11: Probing regulator 11
print_constraints: REG-LDO_8: 1250 <--> 1800 mV at 1800 mV fast normal
tps6586x-regulator tps6586x-regulator.12: Probing regulator 12
print_constraints: REG-LDO_9: 1250 <--> 2850 mV at 2850 mV fast normal
tegra-nvmap tegra-nvmap: created carveout iram (256KiB)
tegra-nvmap tegra-nvmap: created carveout generic-0 (53248KiB)
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 32
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1576K
PMU: registered new PMU device of type 0
audit: initializing netlink socket (disabled)
type=2000 audit(8.254:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 873
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
>>> backlight_enable
regulator avdd_lvds already enabled
tegra_grhost tegra_grhost: initialized
host1x: tegradc tegradc
tegra_dvfs: rate 216000000 too high for dvfs on disp1
tegradc tegradc.0: probed
Console: switching to colour frame buffer device 160x45
tegradc tegradc.0: probed
host1x: tegradc tegradc
nvhdcp: using "always on" policy.
tegradc tegradc.1: probed
tegradc tegradc.1: probed
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a XScale
serial8250.0: ttyS1 at MMIO 0x70006300 (irq = 122) is a Tegra
Initialized tegra uart driver
brd: module loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
tegra-ehci tegra-ehci.1: irq 53, io mem 0xc5004000
tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Tegra EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.8-1280-20130909-1 ehci_hcd
usb usb1: SerialNumber: tegra-ehci.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
tegra-ehci tegra-ehci.2: irq 129, io mem 0xc5008000
tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Tegra EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.8-1280-20130909-1 ehci_hcd
usb usb2: SerialNumber: tegra-ehci.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
mousedev: PS/2 mouse device common for all mice
input: gpio-keys as /devices/platform/gpio-keys/input/input0
tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0
trpc_sema_init: registered misc dev 10:59
trpc_node_register: Adding 'local' to node list
trpc_node_register: Adding 'avp-remote' to node list
tegra_avp_probe: driver registered, kernel 1f300000(dd200000), msg area 1b978000/1b978110
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: Invalid maximum block size, assuming 512 bytes
Registered led device: mmc0::
mmc0: SDHCI controller on platform [sdhci-tegra.3] using ADMA
mmc1: Invalid maximum block size, assuming 512 bytes
Registered led device: mmc1::
mmc1: SDHCI controller on platform [sdhci-tegra.0] using ADMA
Registered led device: wifi-led
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zcache: cleancache enabled using kernel transcendent memory and compression buddies
nvec nvec.0: using adapter Tegra I2C adapter.2
nvec nvec.0: slave at i2c address 0x8a using irq 0xaa
nvec nvec.0: ec firmware version 01.20.00 / f9
nvec nvec.0: added 6 NVEC devices
input: nvec keyboard as /devices/virtual/input/input1
Registered led device: nvec-led
input: NVEC sleep button as /devices/virtual/input/input2
input: NVEC power button as /devices/virtual/input/input3
input: NVEC lid switch button as /devices/virtual/input/input4
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
Capping clocks set too high:
pll_e (1200000000 > 100000000)
disp1 (216000000 > 190000000) (clock enabled!)
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 SEM08G 7.39 GiB
registered taskstats version 1
tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk0
parse_tegrapart: tegrapart=recovery:700:a00:800,boot:1100:1000:800,mbr:2100:200:800
parse_tegrapart: part #1 [recover] start=7168 size=10240
parse_tegrapart: part #2 [boot] start=17408 size=16384
parse_tegrapart: mbr start=33792
tegra_msdos_parse: mbr_offset=33792
tegra_msdos_parse: slot 1, start=2048 size=614400
tegra_msdos_parse: put_partition
tegra_msdos_parse: slot 2, start=616448 size=819200
tegra_msdos_parse: put_partition
tegra_msdos_parse: slot 3, start=1435648 size=4096
tegra_msdos_parse: put_partition
tegra_msdos_parse: slot 4, start=1439744 size=14038016
tegra_msdos_parse: slot 4 extended partition
<
tegra_msdos_parse_extended: read part sector, start=33792+1439744 size=14038016
tps6586x-rtc tps6586x-rtc.0: setting system clock to 2013-09-27 08:32:50 UTC (1380270770)
Freeing init memory: 164K
tegra_msdos_parse_extended: put_partition 6 start=33792+1440768 size=2529280
tegra_msdos_parse_extended: done with this sector
tegra_msdos_parse_extended: extended part slot 2
tegra_msdos_parse_extended: read part sector, start=33792+3970048 size=11507712
tegra_msdos_parse_extended: put_partition 7 start=33792+3971072 size=11506688
tegra_msdos_parse_extended: done with this sector
tegra_msdos_parse_extended: done
>
tegra_msdos_parse: done
mmcblk0: p1 p2 p3 p4 p5 p6 p7
usb 1-1: new high speed USB device using tegra-ehci and address 2
usb 1-1: New USB device found, idVendor=0424, idProduct=2512
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
usb 2-1: new high speed USB device using tegra-ehci and address 2
md: raid0 personality registered for level 0
usb 2-1: New USB device found, idVendor=0424, idProduct=2513
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
md: raid1 personality registered for level 1
udevd (64): /proc/64/oom_adj is deprecated, please use /proc/64/oom_score_adj instead.
usb 1-1.1: new high speed USB device using tegra-ehci and address 3
usb 1-1.1: New USB device found, idVendor=0db0, idProduct=3871
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: 802.11 n WLAN
usb 1-1.1: Manufacturer: Ralink
usb 1-1.1: SerialNumber: 1.0
usb 1-1.2: new full speed USB device using tegra-ehci and address 4
usb 1-1.2: New USB device found, idVendor=0db0, idProduct=a871
usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.1: new high speed USB device using tegra-ehci and address 3
usb 2-1.1: New USB device found, idVendor=1b8f, idProduct=0307
usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1.1: Product: USB 3.0 Express RC8
usb 2-1.1: Manufacturer: SuperTalent
usb 2-1.1: SerialNumber: 01114800000000000026
scsi0 : usb-storage 2-1.1:1.0
usb 2-1.2: new high speed USB device using tegra-ehci and address 4
usb 2-1.2: New USB device found, idVendor=0bda, idProduct=58f2
usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 2-1.2: Product: USB Camera
usb 2-1.2: Manufacturer: XVA824DE
usb 2-1.2: SerialNumber: 200901010001
elantech: assuming hardware version 3 (with firmware version 0x150500)
elantech: Synaptics capabilities query result 0x69, 0x17, 0x09.
input: ETPS/2 Elantech Touchpad as /devices/serio0/input/input5
scsi 0:0:0:0: Direct-Access USB 3.0 Express RC8 365A PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 48858768 512-byte logical blocks: (25.0 GB/23.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
readahead-collector: starting
type=1305 audit(1380270783.690:4): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
udev: starting version 147
alc5632 0-001e: got vid1: ec10
alc5632 0-001e: got vid2: 55c
Control name 'Right Capture Mix Right Phone Capture Switch' truncated to 'Right Capture Mix Right Phone Capture Switc'
spk event: 2
asoc: alc5632-hifi <-> tegra-i2s.0 mapping ok
input: tegra-paz00 Headphone Jack as /devices/platform/tegra-snd-paz00.0/sound/card0/input6
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
cfg80211: Calling CRDA to update world regulatory domain
usb 1-1.1: reset high speed USB device using tegra-ehci and address 3
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3070, rf: 0005, rev: 0201.
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800usb-phy0::radio
Registered led device: rt2800usb-phy0::assoc
Registered led device: rt2800usb-phy0::quality
usbcore: registered new interface driver rt2800usb
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB Camera (0bda:58f2)
input: USB Camera as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
cfg80211: Pending regulatory request, waiting for it to be processed...
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: GB
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2484 MHz
cfg80211: Regulatory domain changed to country: GB
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@xxxxxxxxxx
zcache: created ephemeral tmem pool, id=0, client=65535
EXT4-fs (sda2): re-mounted. Opts: (null)
Adding 1048572k swap on /dev/sda3. Priority:-1 extents:1 across:1048572k
phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'.
phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.12.
ieee80211 phy0: device now idle
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ieee80211 phy0: device no longer idle - scanning
ieee80211 phy0: device now idle
ieee80211 phy0: device no longer idle - scanning
ieee80211 phy0: device now idle
fuse init (API version 7.16)
ieee80211 phy0: device no longer idle - scanning
wlan0: deauthenticating from 38:46:08:0a:d2:11 by local choice (reason=3)
wlan0: authenticate with 38:46:08:0a:d2:11 (try 1)
wlan0: authenticated
wlan0: associate with 38:46:08:0a:d2:11 (try 1)
wlan0: RX AssocResp from 38:46:08:0a:d2:11 (capab=0x411 status=0 aid=1)
wlan0: associated
ieee80211 phy0: Allocated STA 38:46:08:0a:d2:11
ieee80211 phy0: Inserted STA 38:46:08:0a:d2:11
ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 1/5
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 2/5
wlan0: no IPv6 routers present
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 1/5
wlan0: detected beacon loss from AP - sending probe request
wlan0: cancelling probereq poll due to a received beacon
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 1/5
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 2/5
wlan0: detected beacon loss from AP - sending probe request
wlan0: cancelling probereq poll due to a received beacon
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 1/5
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 2/5
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 1/5
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 2/5
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 1/5
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 2/5
wlan0: detected beacon loss from AP - sending probe request
wlan0: cancelling probereq poll due to a received beacon
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 1/5
ieee80211 phy0: wlan0: No probe response from AP 38:46:08:0a:d2:11 after 500ms, try 2/5
[ 65.706]
X.Org X Server 1.10.6
Release Date: 2012-02-10
[ 65.707] X Protocol Version 11, Revision 0
[ 65.707] Build Operating System: chrs1 3.4.0
[ 65.707] Current Operating System: Linux rs1.shatteredsilicon.net 2.6.38.8-1280-20130909-1 #2 SMP Tue Sep 10 12:20:48 BST 2013 armv7l
[ 65.707] Kernel command line: vmalloc=320M video=tegrafb console=tty0 ro usbcore.old_scheme_first=1 elevator=deadline zcache quiet tegraboot=sdmmc tegrapart=recovery:700:a00:800,boot:1100:1000:800,mbr:2100:200:800
[ 65.708] Build Date: 26 September 2013 02:40:30PM
[ 65.708] Build ID: xorg-x11-server 1.10.6-1.el6
[ 65.708] Current version of pixman: 0.26.2
[ 65.708] Before reporting problems, check https://www.redhat.com/apps/support/
to make sure that you have the latest version.
[ 65.709] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 65.709] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 27 08:33:46 2013
[ 65.721] (==) Using config file: "/etc/X11/xorg.conf"
[ 65.725] (==) ServerLayout "Default Layout"
[ 65.725] (==) No screen section available. Using defaults.
[ 65.725] (**) |-->Screen "Default Screen Section" (0)
[ 65.725] (**) | |-->Monitor "<default monitor>"
[ 65.728] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 65.728] (**) | |-->Device "Tegra"
[ 65.728] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 65.728] (**) |-->Input Device "Keyboard0"
[ 65.728] (**) |-->Input Device "Mouse0"
[ 65.728] (==) Automatically adding devices
[ 65.728] (==) Automatically enabling devices
[ 65.731] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 65.731] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 65.731] (II) Loader magic: 0x1b54b8
[ 65.731] (II) Module ABI versions:
[ 65.731] X.Org ANSI C Emulation: 0.4
[ 65.731] X.Org Video Driver: 10.0
[ 65.731] X.Org XInput driver : 12.2
[ 65.731] X.Org Server Extension : 5.0
[ 65.731] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 65.732] (WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
[ 65.732] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 65.732] (II) "dbe" will be loaded by default.
[ 65.732] (II) "glx" will be loaded by default.
[ 65.732] (II) "record" will be loaded by default.
[ 65.732] (II) "dri" will be loaded even though the default is to disable it.
[ 65.732] (II) "dri2" will be loaded even though the default is to disable it.
[ 65.732] (II) LoadModule: "extmod"
[ 65.737] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 65.743] (II) Module extmod: vendor="X.Org Foundation"
[ 65.743] compiled for 1.10.6, module version = 1.0.0
[ 65.743] Module class: X.Org Server Extension
[ 65.743] ABI class: X.Org Server Extension, version 5.0
[ 65.743] (II) Loading extension SELinux
[ 65.743] (II) Loading extension MIT-SCREEN-SAVER
[ 65.743] (II) Loading extension XFree86-VidModeExtension
[ 65.743] (II) Loading extension DPMS
[ 65.743] (II) Loading extension XVideo
[ 65.743] (II) Loading extension XVideo-MotionCompensation
[ 65.743] (II) Loading extension X-Resource
[ 65.743] (II) LoadModule: "dbe"
[ 65.743] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 65.745] (II) Module dbe: vendor="X.Org Foundation"
[ 65.745] compiled for 1.10.6, module version = 1.0.0
[ 65.745] Module class: X.Org Server Extension
[ 65.745] ABI class: X.Org Server Extension, version 5.0
[ 65.745] (II) Loading extension DOUBLE-BUFFER
[ 65.745] (II) LoadModule: "glx"
[ 65.745] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 65.753] (II) Module glx: vendor="X.Org Foundation"
[ 65.758] compiled for 1.10.6, module version = 1.0.0
[ 65.758] ABI class: X.Org Server Extension, version 5.0
[ 65.758] (==) AIGLX enabled
[ 65.759] (II) Loading extension GLX
[ 65.759] (II) LoadModule: "record"
[ 65.759] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 65.761] (II) Module record: vendor="X.Org Foundation"
[ 65.761] compiled for 1.10.6, module version = 1.13.0
[ 65.761] Module class: X.Org Server Extension
[ 65.761] ABI class: X.Org Server Extension, version 5.0
[ 65.761] (II) Loading extension RECORD
[ 65.761] (II) LoadModule: "tegra"
[ 65.762] (II) Loading /usr/lib/xorg/modules/drivers/tegra_drv.so
[ 65.789] (II) Module tegra: vendor="X.Org Foundation"
[ 65.789] compiled for 1.9.99.903, module version = 0.4.0
[ 65.789] Module class: X.Org Video Driver
[ 65.789] ABI class: X.Org Video Driver, version 10.0
[ 65.789] (II) LoadModule: "evdev"
[ 65.789] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 65.791] (II) Module evdev: vendor="X.Org Foundation"
[ 65.791] compiled for 1.10.6, module version = 2.6.0
[ 65.791] Module class: X.Org XInput Driver
[ 65.791] ABI class: X.Org XInput driver, version 12.2
[ 65.791] (II) NVIDIA driver for Tegra
[ 65.791] (--) using VT number 1
[ 65.829] (WW) Falling back to old probe method for tegra
[ 65.829] (II) Loading /usr/lib/xorg/modules/drivers/tegra_drv.so
[ 65.833] (II) TEGRA(0): GPU is a T20/T25
[ 65.833] (II) TEGRA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 65.833] (==) TEGRA(0): Depth 24, (--) framebuffer bpp 32
[ 65.833] (==) TEGRA(0): RGB weight 888
[ 65.833] (==) TEGRA(0): Default visual is TrueColor
[ 65.833] (==) TEGRA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 65.834] (II) TEGRA(0): Output LVDS-1 has no monitor section
[ 65.834] (II) TEGRA(0): Output HDMI-1 has no monitor section
[ 65.834] (WW) TEGRA(0): LVDS-1: Error querying display modes: No such device.
[ 65.834] (II) TEGRA(0): EDID for output LVDS-1
[ 65.834] (II) TEGRA(0): Printing probed modes for output LVDS-1
[ 65.834] (II) TEGRA(0): Modeline "1280x720"x60.5 72.00 1280 1418 1554 1588 720 741 745 749 (45.3 kHz)
[ 65.834] (II) TEGRA(0): EDID for output HDMI-1
[ 65.834] (II) TEGRA(0): Output LVDS-1 connected
[ 65.834] (II) TEGRA(0): Output HDMI-1 disconnected
[ 65.834] (II) TEGRA(0): Using exact sizes for initial modes
[ 65.834] (II) TEGRA(0): Output LVDS-1 using initial mode 1280x720 +0+0
[ 65.834] (II) TEGRA(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 65.834] (--) TEGRA(0): VideoRAM: 32768 kByte
[ 65.835] (--) TEGRA(0): Virtual size is 1280x720 (pitch 0)
[ 65.835] (**) TEGRA(0): Driver mode "1280x720": 72.0 MHz, 45.3 kHz, 60.5 Hz
[ 65.835] (II) TEGRA(0): Modeline "1280x720"x60.5 72.00 1280 1418 1554 1588 720 741 745 749 (45.3 kHz)
[ 65.835] (==) TEGRA(0): DPI set to (96, 96)
[ 65.835] (II) Loading sub module "fb"
[ 65.835] (II) LoadModule: "fb"
[ 65.835] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 65.840] (II) Module fb: vendor="X.Org Foundation"
[ 65.840] compiled for 1.10.6, module version = 1.0.0
[ 65.840] ABI class: X.Org ANSI C Emulation, version 0.4
[ 65.840] (II) Loading sub module "ramdac"
[ 65.840] (II) LoadModule: "ramdac"
[ 65.840] (II) Module "ramdac" already built-in
[ 65.840] (--) Depth 24 pixmap format is 32 bpp
[ 65.856] (==) TEGRA(0): Backing store disabled
[ 65.856] (==) TEGRA(0): Silken mouse enabled
[ 65.859] (II) TEGRA(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 65.860] (WW) TEGRA(0): Cannot set color map.
[ 65.861] (II) Loading extension TEGRA-EGL
[ 65.861] (==) TEGRA(0): DPMS enabled
[ 65.861] (--) RandR disabled
[ 65.861] (II) Initializing built-in extension Generic Event Extension
[ 65.861] (II) Initializing built-in extension SHAPE
[ 65.861] (II) Initializing built-in extension MIT-SHM
[ 65.861] (II) Initializing built-in extension XInputExtension
[ 65.861] (II) Initializing built-in extension XTEST
[ 65.861] (II) Initializing built-in extension BIG-REQUESTS
[ 65.861] (II) Initializing built-in extension SYNC
[ 65.861] (II) Initializing built-in extension XKEYBOARD
[ 65.861] (II) Initializing built-in extension XC-MISC
[ 65.861] (II) Initializing built-in extension XINERAMA
[ 65.861] (II) Initializing built-in extension XFIXES
[ 65.861] (II) Initializing built-in extension RENDER
[ 65.861] (II) Initializing built-in extension RANDR
[ 65.861] (II) Initializing built-in extension COMPOSITE
[ 65.861] (II) Initializing built-in extension DAMAGE
[ 65.861] (II) SELinux: Disabled on system
[ 65.893] (II) AIGLX: Screen 0 is not DRI2 capable
[ 65.893] (II) AIGLX: Screen 0 is not DRI capable
[ 65.974] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 65.974] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 65.975] (II) TEGRA(0): Setting screen physical size to 338 x 190
[ 66.242] (II) Using input driver 'evdev' for 'Keyboard0'
[ 66.242] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 66.242] (**) Option "CoreKeyboard"
[ 66.242] (**) Keyboard0: always reports core events
[ 66.242] (**) Keyboard0: Device: "/dev/input/event1"
[ 66.355] (--) Keyboard0: Found keys
[ 66.355] (II) Keyboard0: Configuring as keyboard
[ 66.355] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 66.355] (**) Option "xkb_rules" "evdev"
[ 66.355] (**) Option "xkb_model" "evdev"
[ 66.355] (**) Option "xkb_layout" "gb"
[ 66.422] (II) Using input driver 'evdev' for 'Mouse0'
[ 66.422] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 66.422] (**) Option "CorePointer"
[ 66.423] (**) Mouse0: always reports core events
[ 66.423] (**) Mouse0: Device: "/dev/input/event5"
[ 66.475] (**) Mouse0: ButtonMapping '1 2 3 0 0 0 0'
[ 66.475] (--) Mouse0: Found 3 mouse buttons
[ 66.475] (--) Mouse0: Found absolute axes
[ 66.475] (--) Mouse0: Found x and y absolute axes
[ 66.475] (--) Mouse0: Found absolute touchpad.
[ 66.475] (II) Mouse0: Configuring as touchpad
[ 66.475] (**) Option "Emulate3Buttons" "true"
[ 66.475] (II) Mouse0: Forcing middle mouse button emulation on.
[ 66.475] (**) Option "EmulateWheel" "false"
[ 66.475] (**) Option "EmulateWheelButton" "0"
[ 66.475] (**) Mouse0: YAxisMapping: buttons 4 and 5
[ 66.475] (**) Mouse0: EmulateWheelButton: 0, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 66.475] (II) XINPUT: Adding extended input device "Mouse0" (type: TOUCHPAD)
[ 66.475] (II) Mouse0: initialized for absolute axes.
[ 66.475] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 66.475] (**) Mouse0: (accel) acceleration profile 0
[ 66.475] (**) Mouse0: (accel) acceleration factor: 2.000
[ 66.476] (**) Mouse0: (accel) acceleration threshold: 4
[ 66.490] (II) config/hal: Adding input device NVEC lid switch button
[ 66.490] (II) Using input driver 'evdev' for 'NVEC lid switch button'
[ 66.490] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 66.491] (**) NVEC lid switch button: always reports core events
[ 66.491] (**) NVEC lid switch button: Device: "/dev/input/event4"
[ 66.575] (II) NVEC lid switch button: Adding for lid switch
[ 66.575] (WW) NVEC lid switch button: Don't know how to use device
[ 66.575] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/computer_logicaldev_input_2"
[ 66.575] (II) XINPUT: Adding extended input device "NVEC lid switch button" (type: UNKNOWN)
[ 66.586] (II) config/hal: Adding input device NVEC power button
[ 66.586] (II) Using input driver 'evdev' for 'NVEC power button'
[ 66.586] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 66.586] (**) NVEC power button: always reports core events
[ 66.586] (**) NVEC power button: Device: "/dev/input/event3"
[ 66.655] (--) NVEC power button: Found keys
[ 66.655] (II) NVEC power button: Configuring as keyboard
[ 66.655] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/computer_logicaldev_input_1"
[ 66.655] (II) XINPUT: Adding extended input device "NVEC power button" (type: KEYBOARD)
[ 66.655] (**) Option "xkb_rules" "evdev"
[ 66.655] (**) Option "xkb_model" "pc105"
[ 66.655] (**) Option "xkb_layout" "gb"
[ 66.655] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 66.732] (II) config/hal: Adding input device NVEC sleep button
[ 66.732] (II) Using input driver 'evdev' for 'NVEC sleep button'
[ 66.732] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 66.733] (**) NVEC sleep button: always reports core events
[ 66.733] (**) NVEC sleep button: Device: "/dev/input/event2"
[ 66.785] (--) NVEC sleep button: Found keys
[ 66.785] (II) NVEC sleep button: Configuring as keyboard
[ 66.785] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/computer_logicaldev_input_0"
[ 66.785] (II) XINPUT: Adding extended input device "NVEC sleep button" (type: KEYBOARD)
[ 66.785] (**) Option "xkb_rules" "evdev"
[ 66.785] (**) Option "xkb_model" "pc105"
[ 66.785] (**) Option "xkb_layout" "gb"
[ 66.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 66.797] (II) config/hal: Adding input device nvec keyboard
[ 66.797] (II) Using input driver 'evdev' for 'nvec keyboard'
[ 66.797] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 66.797] (**) nvec keyboard: always reports core events
[ 66.797] (**) nvec keyboard: Device: "/dev/input/event1"
[ 66.865] (WW) nvec keyboard: device file is duplicate. Ignoring.
[ 66.925] (EE) PreInit returned 8 for "nvec keyboard"
[ 66.925] (II) UnloadModule: "evdev"
[ 66.925] (II) Unloading evdev
[ 66.925] (EE) config/hal: NewInputDeviceRequest failed (8)
[ 66.933] (II) config/hal: Adding input device tegra-paz00 Headphone Jack
[ 66.933] (II) Using input driver 'evdev' for 'tegra-paz00 Headphone Jack'
[ 66.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 66.933] (**) tegra-paz00 Headphone Jack: always reports core events
[ 66.933] (**) tegra-paz00 Headphone Jack: Device: "/dev/input/event6"
[ 66.965] (WW) tegra-paz00 Headphone Jack: Don't know how to use device
[ 67.015] (EE) PreInit returned 8 for "tegra-paz00 Headphone Jack"
[ 67.015] (II) UnloadModule: "evdev"
[ 67.015] (II) Unloading evdev
[ 67.015] (EE) config/hal: NewInputDeviceRequest failed (8)
[ 67.026] (II) config/hal: Adding input device USB Camera
[ 67.026] (II) Using input driver 'evdev' for 'USB Camera'
[ 67.026] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 67.026] (**) USB Camera: always reports core events
[ 67.026] (**) USB Camera: Device: "/dev/input/event7"
[ 67.085] (--) USB Camera: Found keys
[ 67.085] (II) USB Camera: Configuring as keyboard
[ 67.085] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/usb_device_bda_58f2_200901010001_if0_logicaldev_input"
[ 67.085] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD)
[ 67.085] (**) Option "xkb_rules" "evdev"
[ 67.085] (**) Option "xkb_model" "pc105"
[ 67.085] (**) Option "xkb_layout" "gb"
[ 67.085] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 67.097] (II) config/hal: Adding input device gpio-keys
[ 67.097] (II) Using input driver 'evdev' for 'gpio-keys'
[ 67.097] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 67.097] (**) gpio-keys: always reports core events
[ 67.097] (**) gpio-keys: Device: "/dev/input/event0"
[ 67.185] (--) gpio-keys: Found keys
[ 67.185] (II) gpio-keys: Configuring as keyboard
[ 67.185] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/platform_gpio_keys_logicaldev_input"
[ 67.185] (II) XINPUT: Adding extended input device "gpio-keys" (type: KEYBOARD)
[ 67.185] (**) Option "xkb_rules" "evdev"
[ 67.185] (**) Option "xkb_model" "pc105"
[ 67.185] (**) Option "xkb_layout" "gb"
[ 67.185] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 71.245] (WW) TEGRA(0): LVDS-1: Error querying display modes: No such device.
[ 78.563] (WW) TEGRA(0): LVDS-1: Error querying display modes: No such device.
Follow ups
