aide team mailing list archive

[Benoit MORDAC <question535080@xxxxxxxxxxxxxxxxxxxxx>]

Question #535080 on Ubuntu changed:
https://answers.launchpad.net/ubuntu/+question/535080

Benoit MORDAC gave more information on the question:
Ci dessous la fin du dmesg (partie suivant la sortie de veille) :

[53419.397173] smpboot: CPU 7 is now offline
[53419.413196] ACPI: Low-level resume complete
[53419.413239] ACPI : EC: EC started
[53419.413240] PM: Restoring platform NVS memory
[53419.415543] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
[53419.415572] Enabling non-boot CPUs ...
[53419.433317] x86: Booting SMP configuration:
[53419.433318] smpboot: Booting Node 0 Processor 1 APIC 0x2
[53419.434746] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
[53419.437932]  cache: parent cpu1 should not be sleeping
[53419.438070] CPU1 is up
[53419.457367] smpboot: Booting Node 0 Processor 2 APIC 0x4
[53419.458784] microcode: CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
[53419.461921]  cache: parent cpu2 should not be sleeping
[53419.462056] CPU2 is up
[53419.481407] smpboot: Booting Node 0 Processor 3 APIC 0x6
[53419.482846] microcode: CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
[53419.485995]  cache: parent cpu3 should not be sleeping
[53419.486125] CPU3 is up
[53419.505401] smpboot: Booting Node 0 Processor 4 APIC 0x1
[53419.508675]  cache: parent cpu4 should not be sleeping
[53419.508790] CPU4 is up
[53419.525414] smpboot: Booting Node 0 Processor 5 APIC 0x3
[53419.528641]  cache: parent cpu5 should not be sleeping
[53419.528748] CPU5 is up
[53419.553437] smpboot: Booting Node 0 Processor 6 APIC 0x5
[53419.556729]  cache: parent cpu6 should not be sleeping
[53419.556807] CPU6 is up
[53419.577482] smpboot: Booting Node 0 Processor 7 APIC 0x7
[53419.580807]  cache: parent cpu7 should not be sleeping
[53419.580889] CPU7 is up
[53419.586181] ACPI: Waking up from system sleep state S3
[53420.473333] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[53420.473336] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[53420.473355] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[53420.486878] PM: noirq resume of devices complete after 17.147 msecs
[53420.517921] PM: early resume of devices complete after 31.027 msecs
[53420.518019] usb usb3: root hub lost power or was reset
[53420.518021] usb usb4: root hub lost power or was reset
[53420.518757] sd 0:0:0:0: [sda] Starting disk
[53420.518761] sd 4:0:0:0: [sdb] Starting disk
[53420.524737] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[53420.529147] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[53420.529150] [drm] PCIE gen 3 link speeds already enabled
[53420.532941] [drm] PCIE GART of 2048M enabled (table at 0x00000000002E8000).
[53420.533046] radeon 0000:01:00.0: WB enabled
[53420.533048] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023e4d4c00
[53420.533049] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88023e4d4c04
[53420.533050] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88023e4d4c08
[53420.533051] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023e4d4c0c
[53420.533052] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88023e4d4c10
[53420.533484] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001c35a18
[53420.634029] radeon 0000:01:00.0: VCE init error (-110).
[53420.745178] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[53420.745205] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[53420.827453] [drm] ring test on 0 succeeded in 1 usecs
[53420.827457] [drm] ring test on 1 succeeded in 1 usecs
[53420.827476] [drm] ring test on 2 succeeded in 1 usecs
[53420.827482] [drm] ring test on 3 succeeded in 3 usecs
[53420.827487] [drm] ring test on 4 succeeded in 3 usecs
[53420.853189] ata3: SATA link down (SStatus 0 SControl 300)
[53420.853234] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[53421.003642] [drm] ring test on 5 succeeded in 2 usecs
[53421.003646] [drm] UVD initialized successfully.
[53421.003692] [drm] ib test on ring 0 succeeded in 0 usecs
[53421.003717] [drm] ib test on ring 1 succeeded in 0 usecs
[53421.003776] [drm] ib test on ring 2 succeeded in 0 usecs
[53421.003818] [drm] ib test on ring 3 succeeded in 0 usecs
[53421.003841] [drm] ib test on ring 4 succeeded in 0 usecs
[53421.004158] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[53421.004171] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[53421.004172] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[53421.004173] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[53421.004481] ata5.00: supports DRM functions and may not be fully accessible
[53421.155079] ata5.00: disabling queued TRIM support
[53421.155780] rtc_cmos 00:02: System wakeup disabled by ACPI
[53421.156342] ata2.00: configured for UDMA/100
[53421.156710] serial 00:07: activated
[53421.157971] parport_pc 00:08: activated
[53421.159857] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[53421.159858] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[53421.159859] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[53421.160114] ata5.00: supports DRM functions and may not be fully accessible
[53421.161198] usb 1-1.5: reset high-speed USB device number 3 using ehci-pci
[53421.161207] usb 2-1.5: reset full-speed USB device number 4 using ehci-pci
[53421.163963] ata5.00: disabling queued TRIM support
[53421.168264] ata5.00: configured for UDMA/133
[53421.168284] ata5.00: Enabling discard_zeroes_data
[53421.360024] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input40
[53421.653289] [drm] ib test on ring 5 succeeded
[53421.809545] PM: resume of devices complete after 1291.602 msecs
[53421.810841] PM: Finishing wakeup.
[53421.810842] Restarting tasks ... done.
[53421.902020] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[53421.902500] pci_bus 0000:02: Allocating resources
[53421.902512] pci_bus 0000:03: Allocating resources
[53421.902586] pci_bus 0000:04: Allocating resources
[53421.902596] pci_bus 0000:05: Allocating resources
[53421.902606] pci_bus 0000:06: Allocating resources
[53421.902617] pci_bus 0000:0e: Allocating resources
[53421.902635] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[53421.902724] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[53421.902774] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[53421.902818] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[53421.903041] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[53421.903052] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[53421.903114] acpi device:41: Cannot transition to power state D3hot for parent in (unknown)
[53421.915082] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[53421.915203] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[53422.449262] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[53422.451639] ata1.00: configured for UDMA/133
[53422.758539] e1000e: eno1 NIC Link is Down
[53422.759468] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[53422.957413] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[53422.957467] IPv6: ADDRCONF(NETDEV_UP): vl301: link is not ready
[53422.958568] IPv6: ADDRCONF(NETDEV_UP): vl301: link is not ready
[53422.959299] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[53422.959418] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[53422.966050] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[53422.966133] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[53423.239011] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[53423.245646] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[53423.245726] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[53423.328705] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[53423.380944] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[53426.341610] wlp3s0: authenticate with 68:a3:78:c3:da:3a
[53426.344040] wlp3s0: send auth to 68:a3:78:c3:da:3a (try 1/3)
[53426.375389] wlp3s0: authenticated
[53426.377232] wlp3s0: associate with 68:a3:78:c3:da:3a (try 1/3)
[53426.380683] wlp3s0: RX AssocResp from 68:a3:78:c3:da:3a (capab=0x411 status=0 aid=2)
[53426.400971] wlp3s0: associated
[53426.401057] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[53454.069585] wlp3s0: authenticate with 68:a3:78:b9:d0:90
[53454.071681] wlp3s0: send auth to 68:a3:78:b9:d0:90 (try 1/3)
[53454.074717] cfg80211: World regulatory domain updated:
[53454.074722] cfg80211:  DFS Master region: unset
[53454.074723] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[53454.074725] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[53454.074727] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[53454.074728] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[53454.074731] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[53454.074732] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[53454.074734] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[53454.074735] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[53454.074736] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[53454.168721] wlp3s0: authenticated
[53454.169576] wlp3s0: associate with 68:a3:78:b9:d0:90 (try 1/3)
[53454.170733] wlp3s0: RX AssocResp from 68:a3:78:b9:d0:90 (capab=0x11 status=0 aid=1)
[53454.189048] wlp3s0: associated
[53454.191165] cfg80211: Regulatory domain changed to country: FR
[53454.191167] cfg80211:  DFS Master region: ETSI
[53454.191169] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[53454.191170] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[53454.191172] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[53454.191173] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[53454.191174] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[53454.191175] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[53477.595669] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[53477.595673] [drm] PCIE gen 3 link speeds already enabled
[53477.599230] [drm] PCIE GART of 2048M enabled (table at 0x00000000002E8000).
[53477.599326] radeon 0000:01:00.0: WB enabled
[53477.599328] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023e4d4c00
[53477.599329] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88023e4d4c04
[53477.599330] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88023e4d4c08
[53477.599331] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023e4d4c0c
[53477.599332] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88023e4d4c10
[53477.599726] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001c35a18
[53477.700267] radeon 0000:01:00.0: VCE init error (-110).
[53477.874017] [drm] ring test on 0 succeeded in 1 usecs
[53477.874023] [drm] ring test on 1 succeeded in 1 usecs
[53477.874026] [drm] ring test on 2 succeeded in 1 usecs
[53477.874033] [drm] ring test on 3 succeeded in 4 usecs
[53477.874039] [drm] ring test on 4 succeeded in 3 usecs
[53478.050024] [drm] ring test on 5 succeeded in 2 usecs
[53478.050031] [drm] UVD initialized successfully.
[53478.050063] [drm] ib test on ring 0 succeeded in 0 usecs
[53478.050090] [drm] ib test on ring 1 succeeded in 0 usecs
[53478.050115] [drm] ib test on ring 2 succeeded in 0 usecs
[53478.050140] [drm] ib test on ring 3 succeeded in 0 usecs
[53478.050163] [drm] ib test on ring 4 succeeded in 0 usecs
[53478.697881] [drm] ib test on ring 5 succeeded
[53488.047818] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[53488.047823] [drm] PCIE gen 3 link speeds already enabled
[53488.051386] [drm] PCIE GART of 2048M enabled (table at 0x00000000002E8000).
[53488.051490] radeon 0000:01:00.0: WB enabled
[53488.051492] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023e4d4c00
[53488.051493] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88023e4d4c04
[53488.051495] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88023e4d4c08
[53488.051496] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023e4d4c0c
[53488.051497] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88023e4d4c10
[53488.051892] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001c35a18
[53488.152470] radeon 0000:01:00.0: VCE init error (-110).
[53488.326034] [drm] ring test on 0 succeeded in 1 usecs
[53488.326039] [drm] ring test on 1 succeeded in 1 usecs
[53488.326042] [drm] ring test on 2 succeeded in 1 usecs
[53488.326049] [drm] ring test on 3 succeeded in 4 usecs
[53488.326055] [drm] ring test on 4 succeeded in 3 usecs
[53488.502007] [drm] ring test on 5 succeeded in 2 usecs
[53488.502012] [drm] UVD initialized successfully.
[53488.502041] [drm] ib test on ring 0 succeeded in 0 usecs
[53488.502067] [drm] ib test on ring 1 succeeded in 0 usecs
[53488.502092] [drm] ib test on ring 2 succeeded in 0 usecs
[53488.502116] [drm] ib test on ring 3 succeeded in 0 usecs
[53488.502140] [drm] ib test on ring 4 succeeded in 0 usecs
[53489.150089] [drm] ib test on ring 5 succeeded

-- 
You received this question notification because your team Communauté
d'aide d'Ubuntu en Français is an answer contact for Ubuntu.