← Back to team overview

bumblebee team mailing list archive

Upgraded to Bumblebee 3.0 stable via PPA - Fan TOO NOISY

 

Distro:
Linux Mint 12

Kernel:
$ uname -a
Linux XG 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux

Manufacturer and model:
Dell Inspiron 15R (N5110)
note:
the command mentioned here didnt work for me:
https://github.com/Bumblebee-Project/Bumblebee/wiki/Reporting-Issues

$ for keyword in baseboard-manufacturer baseboard-product-name baseboard-version system-manufacturer system-product-name system-version bios-vendor bios-version bios-release-date; do
    printf "%-22s: " "$keyword";
    sudo dmidecode -s "$keyword";
done
_______________________________


I upgraded to latest Bumblebee 3.0 stable via PPA through Update Manager. All went fine, then I run:

$ optirun firefox
Xlib:  extension "GLX" missing on display ":8".

the clue to the problem I found here:
https://github.com/Bumblebee-Project/Bumblebee/wiki/Supported-drivers

I needed to do the following to make the LibGL work:

1. open as admin /etc/bumblebee/bumblebee.conf
2. edit line 22 so it reads
Driver=nvidia

then do the following, to be sure:

After installation, allow yourself to use Bumblebee (replace $USER by your username):

sudo usermod -a -G bumblebee $USER

Then, reboot.

--------------------------------------------------------

Tests:

$ glxspheres
Polygons in scene: 62464
Visual ID of window: 0x93
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Sandybridge Mobile
56.909574 frames/sec - 52.008522 Mpixels/sec
59.973454 frames/sec - 54.808540 Mpixels/sec
59.971668 frames/sec - 54.806908 Mpixels/sec
59.472910 frames/sec - 54.351103 Mpixels/sec
59.981566 frames/sec - 54.815954 Mpixels/sec
59.975305 frames/sec - 54.810232 Mpixels/sec
59.966931 frames/sec - 54.802578 Mpixels/sec
59.983675 frames/sec - 54.817881 Mpixels/sec
59.978178 frames/sec - 54.812858 Mpixels/sec
59.974598 frames/sec - 54.809585 Mpixels/sec
59.975927 frames/sec - 54.810800 Mpixels/sec
59.976484 frames/sec - 54.811310 Mpixels/sec

$ optirun glxspheres
Polygons in scene: 62464
Visual ID of window: 0x21
Context is Direct
OpenGL Renderer: GeForce GT 525M/PCI/SSE2
83.493122 frames/sec - 76.302695 Mpixels/sec
89.495882 frames/sec - 81.788497 Mpixels/sec
90.311080 frames/sec - 82.533489 Mpixels/sec
92.954501 frames/sec - 84.949260 Mpixels/sec
97.630015 frames/sec - 89.222118 Mpixels/sec
90.991800 frames/sec - 83.155586 Mpixels/sec
91.404266 frames/sec - 83.532530 Mpixels/sec
88.815331 frames/sec - 81.166555 Mpixels/sec
89.083120 frames/sec - 81.411281 Mpixels/sec
89.972485 frames/sec - 82.224055 Mpixels/sec
____________________________________________


Now I notice even though its running few degrees cooler, after a while - 5 minutes or so, when temp drops below 59 degrees - the fan starts to make intermittent whirring sound, then constant whirring very noisy, too noisy. I suspect Power Management features...

so I run as advised on bbswitch page:

$ dmesg | grep -C 10 bbswitch:
[ 14.845278] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 14.845590] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17 [ 14.845663] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   16.015338] r8169 0000:05:00.0: eth0: link down
[   16.015345] r8169 0000:05:00.0: eth0: link down
[   16.015587] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.322042] ppdev: user-space parallel port driver
[   16.554974] init: failsafe main process (923) killed by TERM signal
[ 16.555357] init: apport pre-start process (1435) terminated with status 1 [ 16.560324] init: apport post-stop process (1464) terminated with status 1 [ 16.754854] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 16.754866] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   16.754984] bbswitch: detected an Optimus _DSM function
[ 16.754992] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   16.818983] vboxdrv: Found 8 processor cores.
[   16.819385] vboxdrv: fAsync=0 offMin=0x1a6 offMax=0x5421
[ 16.819435] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 16.819438] vboxdrv: Successfully loaded version 4.1.2_Ubuntu (interface 0x00190000).
[   16.825871] vboxpci: IOMMU not found (not registered)
[   16.878937] Bluetooth: Core ver 2.16
[   16.878953] NET: Registered protocol family 31
[   16.878954] Bluetooth: HCI device and connection manager initialized
[   16.878956] Bluetooth: HCI socket layer initialized
[   16.878957] Bluetooth: L2CAP socket layer initialized
[   16.879090] Bluetooth: SCO socket layer initialized
[   16.880473] Bluetooth: RFCOMM TTY layer initialized
[   16.880476] Bluetooth: RFCOMM socket layer initialized
[   16.880477] Bluetooth: RFCOMM ver 1.11
[   16.880536] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.880538] Bluetooth: BNEP filters: protocol multicast
[   16.983018] [TTM] Finalizing pool allocator.
[   16.983050] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
[   16.991403] [drm] Module unloaded
[   16.992156] bbswitch: disabling discrete graphics
[   16.992373] bbswitch: Result of Optimus _DSM call: 11000059
[   16.992401] pci 0000:01:00.0: PCI INT A disabled
[ 17.008283] pci 0000:01:00.0: Refused to change power state, currently in D0
[   17.008638] pci 0000:01:00.0: power state changed by ACPI to D3
[ 17.076715] Adding 275452k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:275452k
[   17.592938] r8169 0000:05:00.0: eth0: link up
[   17.593263] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.513234] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.071859] init: plymouth-stop pre-start process (1849) terminated with status 1
[   20.299247] hda-intel: spurious response 0x0:0x0, last cmd=0x4f2d00
[   20.299256] hda-intel: spurious response 0x0:0x0, last cmd=0x4f2d00
_________________________________________________________________________

the fan noise problem occurs with or without the ppa:ubuntu-x-swat/x-updates
the machine is too noisy to use...
any ideas how to fix??

Attachment: bumblebee-bugreport-20120121_000839.tar.gz
Description: GNU Zip compressed data