desktop-packages team mailing list archive

[Tony Espy <1436330@xxxxxxxxxxxxxxxxxx>]

I tested silo-027 on my old Thinkpad 410s running vivid.   I know see
the proper metrics on both the default and network routes for both eth0
and wlan0.

Tested on mako ( devel-proposed/ubuntu #250) and also verified that the
proper metrics appear for default and network routes for both mobile
data ( rmnet_usb0 ) and WiFi ( wlan0 ).  There doesn't seem to be any
adverse affects otherwise.   Note, on touch, it's pretty rare for the
WiFi and mobile data networks to be the same.

Tested krillin ( devel-proposed/krillin.en #137 ).  It also appears to
work OK.  Note, the network setup on krillin is slightly different as
it's rild always configures a connection with IP address and gateway the
same, so only a default route is created for mobile data.  When WiFi is
enabled, I see two default routes with the correct metrics, and a
network route for WiFi.

I still would like to do some more testing early next week, but results
look promising.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1436330

Title:
  Network Manager doesn't set metric for local networks any more,
  causing connection issues

Status in NetworkManager:
  Fix Released
Status in network-manager package in Ubuntu:
  In Progress
Status in network-manager source package in Vivid:
  Triaged

Bug description:
  [Impact]
  NM changed its method of setting routes on systems, and no longer attaches a metric value specific to the type of device being used. These values were used to prioritize connections, so that for example, when connected to both wired and wireless at the same time, wired can be used in priority over wireless without incurring packet loss.
  Currently, when connected to both wired and wireless are connected to the same subnet, the user may notice connectivity issues since packets are sent in a round-robin fashion over all default routes on the same subnet with the same metric.

  [Test Case]
  1- Connect to a wireless network.
  2- Connect to the same network over Ethernet both connections should come up on the same subnet.
  3- Make sure there is no packet loss, and that there are specific metric values for each default route, as displayed by 'ip route'.

  [Regression Potential]
  Since handling default routes properly involves correcting the behavior for all device types, VPN behavior may change to pick up the default routes in all cases, over a wired connection. It's also possible that a connection pick up the default route when it is not meant to.

  ---

  With Vivid, having two connections to the same network subnet is
  unstable due to missing metrics for local networks.

  Example:

  Being connected to 192.168.1.0/24 via both wired and wireless will
  cause connectivity issues as sent packets hop between the two
  interfaces.

  It used to be that this wasn't an issue. I would go between work and
  home and plug in and my machine would automatically connect to
  wireless and it would use the lower metric ethernet interface for all
  communications, while the wlan interface would remain connected but
  unused.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: network-manager 0.9.10.0-4ubuntu11
  ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1
  Uname: Linux 3.19.0-9-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.16.2-0ubuntu4
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Wed Mar 25 09:17:27 2015
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2015-01-25 (58 days ago)
  InstallationMedia: Kubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  SourcePackage: network-manager
  UpgradeStatus: Upgraded to vivid on 2015-03-17 (8 days ago)
  nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'.

To manage notifications about this bug go to:
https://bugs.launchpad.net/network-manager/+bug/1436330/+subscriptions