graphite-dev team mailing list archive

[Naveen <question404482@xxxxxxxxxxxxxxxxxxxxx>]

New question #404482 on Graphite:
https://answers.launchpad.net/graphite/+question/404482

Contents of httpd.conf

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/etc/httpd"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
Include conf.modules.d/*.conf

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User apache
Group apache

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@xxxxxxxxxxxxxxx
#
ServerAdmin root@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <Directory> blocks below.
#
<Directory />
    AllowOverride none
    Require all denied
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/html"

#
# Relax access to content within /var/www.
#
<Directory "/var/www">
    AllowOverride None
    # Allow open access:
    Require all granted
</Directory>

# Further relax access to the default document root:
<Directory "/var/www/html">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ".ht*">
    Require all denied
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "logs/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "logs/access_log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

</IfModule>

#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
</Directory>

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /etc/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

#
# Specify a default charset for all content served; this enables
# interpretation of all content as UTF-8 by default.  To use the 
# default browser choice (ISO-8859-1), or to allow the META tags
# in HTML content to override this choice, comment out this
# directive:
#
AddDefaultCharset UTF-8

<IfModule mime_magic_module>
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    MIMEMagicFile conf/magic
</IfModule>

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults if commented: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile on

# Supplemental configuration
#
# Load config files in the "/etc/httpd/conf.d" directory, if any.
IncludeOptional conf.d/*.conf
# Enable virtualhosts, perhaps by adding this to your server's config somewhere,
# probably the main httpd.conf
# NameVirtualHost *:80

# This line also needs to be in your server's config.
LoadModule wsgi_module modules/mod_wsgi.so

# You need to manually edit this file to fit your needs.
# This configuration assumes the default installation prefix
# of /opt/graphite/, if you installed graphite somewhere else
# you will need to change all the occurrences of /opt/graphite/
# in this file to your chosen install location.

<IfModule !wsgi_module.c>
    LoadModule wsgi_module modules/mod_wsgi.so
</IfModule>

# XXX You need to set this up!
# Read http://code.google.com/p/modwsgi/wiki/ConfigurationDirectives#WSGISocketPrefix
# For example, create a directory /var/run/wsgi and use that.
WSGISocketPrefix run/wsgi

<VirtualHost *:80>
        ServerName graphite
        DocumentRoot "/opt/graphite/webapp"
        ErrorLog /opt/graphite/storage/log/webapp/error.log
        CustomLog /opt/graphite/storage/log/webapp/access.log common

        # I've found that an equal number of processes & threads tends
        # to show the best performance for Graphite (ymmv).
        WSGIDaemonProcess graphite processes=5 threads=5 display-name='%{GROUP}' inactivity-timeout=120
        WSGIProcessGroup graphite
        WSGIApplicationGroup %{GLOBAL}
        WSGIImportScript /opt/graphite/conf/graphite.wsgi process-group=graphite application-group=%{GLOBAL}

        # XXX You will need to create this file! There is a graphite.wsgi.example
        # file in this directory that you can safely use, just copy it to graphite.wgsi
        WSGIScriptAlias / /opt/graphite/conf/graphite.wsgi


        # XXX To serve static files, either:
        # * Install the whitenoise Python package (pip install whitenoise)
        # * Collect static files in a directory by running:
        #     django-admin.py collectstatic --noinput --settings=graphite.settings
        #   And set an alias to serve static files with Apache:
        Alias /static/ /opt/graphite/static/

        ########################
        # URL-prefixed install #
        ########################
        # If using URL_PREFIX in local_settings for URL-prefixed install (that is not located at "/"))
        # your WSGIScriptAlias line should look like the following (e.g. URL_PREFX="/graphite"

        # WSGIScriptAlias /graphite /srv/graphite-web/conf/graphite.wsgi/graphite
        # Alias /graphite/static /opt/graphite/webapp/content
        #  <Location "/graphite/static/">
        #        SetHandler None
        # </Location>


        # XXX In order for the django admin site media to work you
        # must change @DJANGO_ROOT@ to be the path to your django
        # installation, which is probably something like:
        # /usr/lib/python2.6/site-packages/django
        Alias /media/ "/usr/lib/python2.7/site-packages/django/contrib/admin/media/"

        # The graphite.wsgi file has to be accessible by apache. It won't
        # be visible to clients because of the DocumentRoot though.
        <Directory /opt/graphite/conf/>
                <IfVersion < 2.4>
                        Order deny,allow
                        Allow from all
                </IfVersion>
                <IfVersion >= 2.4>
                        Require all granted
                </IfVersion>
        </Directory>

</VirtualHost>

=================================================================================================
I've created 'wsgi' directory under /run/ and set owner as apache

I've loaded mod_wsgi module.

================================================================================================
pip freeze


Babel==0.9.6
backports.ssl-match-hostname==3.4.0.2
cairocffi==0.7.2
carbon==0.10.0rc1
cffi==1.9.1
chardet==2.2.1
cloud-init==0.7.6
configobj==4.7.2
constantly==15.1.0
decorator==3.4.0
Django==1.9.11
django-tagging==0.4.3
ethtool==0.8
graphite-web==0.10.0rc1
incremental==16.10.1
iniparse==0.4
IPy==0.75
Jinja2==2.7.2
jsonpatch==1.2
jsonpointer==1.9
kitchen==1.1.1
lxml==3.2.1
M2Crypto==0.21.1
Magic-file-extensions==0.2
MarkupSafe==0.11
pciutils==1.7.3
perf==0.1
policycoreutils-default-encoding==0.1
prettytable==0.7.2
pycparser==2.17
pycurl==7.19.0
pygobject==3.14.0
pygpgme==0.3
pyliblzma==0.5.3
pyOpenSSL==0.13.1
pyparsing==1.5.7
pyserial==2.6
python-dateutil==1.5
python-dmidecode==3.10.13
pytz==2016.7
pyudev==0.15
pyxattr==0.5.1
PyYAML==3.10
requests==2.6.0
rhnlib==2.5.65
rhsm==1.17.9
seobject==0.1
sepolicy==1.1
six==1.9.0
subscription-manager==1.17.15
Twisted==16.6.0
txAMQP==0.6.2
urlgrabber==3.10
urllib3==1.10.2
whisper==0.10.0rc1
yum-metadata-parser==1.1.4
zope.interface==4.3.2


==================================================================================================

I've changed graphite.wsgi.example to .wsgi and owner is apache.
===================================================================================================

I dont know what i'm missing. im new to this. can someone help me? thanks in advance

-- 
You received this question notification because your team graphite-dev
is an answer contact for Graphite.