hybrid-graphics-linux team mailing list archive
-
hybrid-graphics-linux team
-
Mailing list archive
-
Message #00013
Re: logs
here are the logs from my ubuntu server, was competely blind when i ran the
commands, lucky it worked :)
On Wed, Mar 10, 2010 at 9:02 PM, Albert Vilella <avilella@xxxxxxxxx> wrote:
> dmesg > dmesg.log
> sudo lspci -vvnn > lspci-vvnn.log
>
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-server (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 15:07:34 UTC 2009 (Ubuntu 2.6.31-14.48-server)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-server root=UUID=dce0c8b2-f26e-4e8b-b3ff-ac5bf0e0f34f ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb68d000 (usable)
[ 0.000000] BIOS-e820: 00000000bb68d000 - 00000000bb6bf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb6bf000 - 00000000bb74e000 (usable)
[ 0.000000] BIOS-e820: 00000000bb74e000 - 00000000bb7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb7bf000 - 00000000bb7dd000 (usable)
[ 0.000000] BIOS-e820: 00000000bb7dd000 - 00000000bb7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb7ff000 - 00000000bb800000 (usable)
[ 0.000000] BIOS-e820: 00000000bb800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009d000 (usable)
[ 0.000000] modified: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bb68d000 (usable)
[ 0.000000] modified: 00000000bb68d000 - 00000000bb6bf000 (reserved)
[ 0.000000] modified: 00000000bb6bf000 - 00000000bb74e000 (usable)
[ 0.000000] modified: 00000000bb74e000 - 00000000bb7bf000 (ACPI NVS)
[ 0.000000] modified: 00000000bb7bf000 - 00000000bb7dd000 (usable)
[ 0.000000] modified: 00000000bb7dd000 - 00000000bb7ff000 (ACPI data)
[ 0.000000] modified: 00000000bb7ff000 - 00000000bb800000 (usable)
[ 0.000000] modified: 00000000bb800000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] modified: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bb800000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 00bb800000 page 2M
[ 0.000000] kernel direct mapping tables up to bb800000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ a000-10000
[ 0.000000] RAMDISK: 37956000 - 37fefd3b
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bb7fe120 000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000bb7fc000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000bb7e8000 10BFB (v02 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000bb75f000 00040
[ 0.000000] ACPI: ASF! 00000000bb7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 00000000bb7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000bb7fa000 000BC (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000bb7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000bb7e7000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bb7e6000 00773 (v01 TrmRef PtidDevc 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bb7e5000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117)
[ 0.000000] ACPI: BOOT 00000000bb7e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bb7e3000 00310 (v01 INTEL SataAhci 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bb7e2000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bb7e1000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117)
[ 0.000000] ACPI: SPCR 00000000bb7e0000 00050 (v01 HPQOEM SLIC-MPC 00000000 MSFT 01000013)
[ 0.000000] ACPI: ASPT 00000000bb7df000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDRT 00000000bb7de000 00047 (v01 HPQOEM SLIC-MPC 00000000 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bb7dd000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 0000000000036fff] pages 27
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0138000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00019e0ccc] TEXT DATA BSS ==> [0001000000 - 00019e0ccc]
[ 0.000000] #3 [0037956000 - 0037fefd3b] RAMDISK ==> [0037956000 - 0037fefd3b]
[ 0.000000] #4 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
[ 0.000000] #5 [00019e1000 - 00019e1354] BRK ==> [00019e1000 - 00019e1354]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bb68d
[ 0.000000] 0: 0x000bb6bf -> 0x000bb74e
[ 0.000000] 0: 0x000bb7bf -> 0x000bb7dd
[ 0.000000] 0: 0x000bb7ff -> 0x000bb800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 997075
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3831 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 749427 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bb68d000 - 00000000bb6bf000
[ 0.000000] PM: Registered nosave memory: 00000000bb74e000 - 00000000bb7bf000
[ 0.000000] PM: Registered nosave memory: 00000000bb7dd000 - 00000000bb7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages at ffff880028023000, static data 90720 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 979498
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-server root=UUID=dce0c8b2-f26e-4e8b-b3ff-ac5bf0e0f34f ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 3846916k/5111808k available (5303k kernel code, 1123508k absent, 141384k reserved, 3013k data, 660k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:472
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2261.299 MHz processor.
[ 0.001477] Console: colour VGA+ 80x25
[ 0.001480] console [tty0] enabled
[ 0.010317] allocated 40632320 bytes of page_cgroup
[ 0.010319] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.010472] hpet clockevent registered
[ 0.010480] alloc irq_desc for 24 on node 0
[ 0.010484] alloc kstat_irqs on node 0
[ 0.010491] alloc irq_desc for 25 on node 0
[ 0.010492] alloc kstat_irqs on node 0
[ 0.010495] alloc irq_desc for 26 on node 0
[ 0.010496] alloc kstat_irqs on node 0
[ 0.010500] alloc irq_desc for 27 on node 0
[ 0.010501] alloc kstat_irqs on node 0
[ 0.010504] alloc irq_desc for 28 on node 0
[ 0.010505] alloc kstat_irqs on node 0
[ 0.010507] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.010512] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.59 BogoMIPS (lpj=22612990)
[ 0.010529] Security Framework initialized
[ 0.010546] AppArmor: AppArmor initialized
[ 0.010810] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011796] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012200] Mount-cache hash table entries: 256
[ 0.012302] Initializing cgroup subsys ns
[ 0.012306] Initializing cgroup subsys cpuacct
[ 0.012309] Initializing cgroup subsys memory
[ 0.012313] Initializing cgroup subsys freezer
[ 0.012315] Initializing cgroup subsys net_cls
[ 0.012327] CPU: Physical Processor ID: 0
[ 0.012328] CPU: Processor Core ID: 0
[ 0.012331] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012332] CPU: L2 cache: 256K
[ 0.012333] CPU: L3 cache: 3072K
[ 0.012336] CPU 0/0x0 -> Node 0
[ 0.012339] mce: CPU supports 9 MCE banks
[ 0.012347] CPU0: Thermal monitoring handled by SMI
[ 0.012351] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6
[ 0.012358] using mwait in idle threads.
[ 0.012359] Performance Counters: Nehalem/Corei7 events, Intel PMU driver.
[ 0.012365] ... version: 3
[ 0.012366] ... bit width: 48
[ 0.012367] ... generic counters: 4
[ 0.012368] ... value mask: 0000ffffffffffff
[ 0.012369] ... max period: 000000007fffffff
[ 0.012370] ... fixed-purpose counters: 3
[ 0.012371] ... counter mask: 000000070000000f
[ 0.014219] ACPI: Core revision 20090521
[ 0.080207] Setting APIC routing to flat
[ 0.080621] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.180444] CPU0: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz stepping 02
[ 0.300053] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.310339] Initializing CPU#1
[ 0.459640] Calibrating delay using timer specific routine.. 4522.51 BogoMIPS (lpj=22612564)
[ 0.459649] CPU: Physical Processor ID: 0
[ 0.459651] CPU: Processor Core ID: 0
[ 0.459653] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.459655] CPU: L2 cache: 256K
[ 0.459656] CPU: L3 cache: 3072K
[ 0.459659] CPU 1/0x1 -> Node 0
[ 0.459662] mce: CPU supports 9 MCE banks
[ 0.459673] CPU1: Thermal monitoring enabled (TM1)
[ 0.459676] CPU 1 MCA banks SHD:2 SHD:3 SHD:5 SHD:6
[ 0.460707] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.462013] CPU1: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz stepping 02
[ 0.462023] Skipping synchronization checks as TSC is reliable.
[ 0.462124] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.472242] Initializing CPU#2
[ 0.619341] Calibrating delay using timer specific routine.. 4522.52 BogoMIPS (lpj=22612632)
[ 0.619349] CPU: Physical Processor ID: 0
[ 0.619350] CPU: Processor Core ID: 2
[ 0.619352] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.619354] CPU: L2 cache: 256K
[ 0.619355] CPU: L3 cache: 3072K
[ 0.619357] CPU 2/0x4 -> Node 0
[ 0.619359] mce: CPU supports 9 MCE banks
[ 0.619369] CPU2: Thermal monitoring enabled (TM1)
[ 0.619372] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6
[ 0.620140] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.621122] CPU2: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz stepping 02
[ 0.621132] Skipping synchronization checks as TSC is reliable.
[ 0.621228] Booting processor 3 APIC 0x5 ip 0x6000
[ 0.631347] Initializing CPU#3
[ 0.779041] Calibrating delay using timer specific routine.. 4522.52 BogoMIPS (lpj=22612629)
[ 0.779049] CPU: Physical Processor ID: 0
[ 0.779050] CPU: Processor Core ID: 2
[ 0.779053] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.779054] CPU: L2 cache: 256K
[ 0.779055] CPU: L3 cache: 3072K
[ 0.779057] CPU 3/0x5 -> Node 0
[ 0.779059] mce: CPU supports 9 MCE banks
[ 0.779069] CPU3: Thermal monitoring enabled (TM1)
[ 0.779072] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6
[ 0.780128] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.781517] CPU3: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz stepping 02
[ 0.781526] Skipping synchronization checks as TSC is reliable.
[ 0.781548] Brought up 4 CPUs
[ 0.781550] Total of 4 processors activated (18090.16 BogoMIPS).
[ 0.781612] CPU0 attaching sched-domain:
[ 0.781615] domain 0: span 0-1 level SIBLING
[ 0.781617] groups: 0 1
[ 0.781620] domain 1: span 0-3 level MC
[ 0.781621] groups: 0-1 2-3
[ 0.781625] CPU1 attaching sched-domain:
[ 0.781627] domain 0: span 0-1 level SIBLING
[ 0.781628] groups: 1 0
[ 0.781631] domain 1: span 0-3 level MC
[ 0.781632] groups: 0-1 2-3
[ 0.781635] CPU2 attaching sched-domain:
[ 0.781636] domain 0: span 2-3 level SIBLING
[ 0.781638] groups: 2 3
[ 0.781640] domain 1: span 0-3 level MC
[ 0.781642] groups: 2-3 0-1
[ 0.781645] CPU3 attaching sched-domain:
[ 0.781646] domain 0: span 2-3 level SIBLING
[ 0.781648] groups: 3 2
[ 0.781650] domain 1: span 0-3 level MC
[ 0.781651] groups: 2-3 0-1
[ 0.781939] Booting paravirtualized kernel on bare hardware
[ 0.782085] regulator: core version 0.5
[ 0.782112] Time: 20:59:12 Date: 03/10/10
[ 0.782151] NET: Registered protocol family 16
[ 0.782248] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.782250] ACPI: bus type pci registered
[ 0.782322] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[ 0.782324] PCI: MCFG area at f0000000 reserved in E820
[ 0.785603] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.785605] PCI: Using configuration type 1 for base access
[ 0.786209] bio: create slab <bio-0> at 0
[ 0.787616] ACPI: EC: Enabling special treatment for EC from MSI.
[ 0.787618] ACPI: EC: Look up EC in DSDT
[ 0.836742] ACPI: BIOS _OSI(Linux) query ignored
[ 0.847085] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.008439] ACPI: Interpreter enabled
[ 1.008443] ACPI: (supports S0 S3 S4 S5)
[ 1.008473] ACPI: Using IOAPIC for interrupt routing
[ 1.251305] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 1.423530] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.423533] ACPI: EC: driver started in interrupt mode
[ 1.427783] ACPI: Power Resource [FN00] (on)
[ 1.436117] ACPI: Power Resource [FN01] (on)
[ 1.437010] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 1.437907] _OSC invalid UUID
[ 1.437909] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.437993] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.437996] pci 0000:00:01.0: PME# disabled
[ 1.438018] pci 0000:00:02.0: reg 10 64bit mmio: [0xe0000000-0xe03fffff]
[ 1.438022] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 1.438026] pci 0000:00:02.0: reg 20 io port: [0x8050-0x8057]
[ 1.438115] pci 0000:00:16.0: reg 10 64bit mmio: [0xea506100-0xea50610f]
[ 1.438172] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.438177] pci 0000:00:16.0: PME# disabled
[ 1.438246] pci 0000:00:1a.0: reg 10 32bit mmio: [0xea505c00-0xea505fff]
[ 1.438309] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.438314] pci 0000:00:1a.0: PME# disabled
[ 1.438366] pci 0000:00:1b.0: reg 10 64bit mmio: [0xea500000-0xea503fff]
[ 1.438423] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.438427] pci 0000:00:1b.0: PME# disabled
[ 1.438506] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.438510] pci 0000:00:1c.0: PME# disabled
[ 1.438593] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.438598] pci 0000:00:1c.1: PME# disabled
[ 1.438678] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.438682] pci 0000:00:1c.2: PME# disabled
[ 1.438762] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.438766] pci 0000:00:1c.3: PME# disabled
[ 1.438847] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.438851] pci 0000:00:1c.4: PME# disabled
[ 1.438916] pci 0000:00:1d.0: reg 10 32bit mmio: [0xea505800-0xea505bff]
[ 1.438979] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.438983] pci 0000:00:1d.0: PME# disabled
[ 1.439195] pci 0000:00:1f.2: reg 10 io port: [0x8048-0x804f]
[ 1.439202] pci 0000:00:1f.2: reg 14 io port: [0x805c-0x805f]
[ 1.439209] pci 0000:00:1f.2: reg 18 io port: [0x8040-0x8047]
[ 1.439216] pci 0000:00:1f.2: reg 1c io port: [0x8058-0x805b]
[ 1.439223] pci 0000:00:1f.2: reg 20 io port: [0x8020-0x803f]
[ 1.439229] pci 0000:00:1f.2: reg 24 32bit mmio: [0xea505000-0xea5057ff]
[ 1.439273] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.439277] pci 0000:00:1f.2: PME# disabled
[ 1.439314] pci 0000:00:1f.3: reg 10 64bit mmio: [0xea506000-0xea5060ff]
[ 1.439332] pci 0000:00:1f.3: reg 20 io port: [0x8000-0x801f]
[ 1.439399] pci 0000:00:1f.6: reg 10 64bit mmio: [0xea504000-0xea504fff]
[ 1.439483] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]
[ 1.439490] pci 0000:01:00.0: reg 14 io port: [0x7000-0x70ff]
[ 1.439496] pci 0000:01:00.0: reg 18 32bit mmio: [0xea400000-0xea40ffff]
[ 1.439514] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 1.439534] pci 0000:01:00.0: supports D1 D2
[ 1.439568] pci 0000:01:00.1: reg 10 32bit mmio: [0xea410000-0xea413fff]
[ 1.439609] pci 0000:01:00.1: supports D1 D2
[ 1.439669] pci 0000:00:01.0: bridge io port: [0x7000-0x7fff]
[ 1.439671] pci 0000:00:01.0: bridge 32bit mmio: [0xea400000-0xea4fffff]
[ 1.439675] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 1.439727] pci 0000:00:1c.0: bridge io port: [0x6000-0x6fff]
[ 1.439732] pci 0000:00:1c.0: bridge 32bit mmio: [0xe9400000-0xea3fffff]
[ 1.439739] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xe0400000-0xe13fffff]
[ 1.439811] pci 0000:03:00.0: reg 10 64bit mmio: [0xe8400000-0xe840ffff]
[ 1.439894] pci 0000:03:00.0: supports D1
[ 1.439895] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 1.439901] pci 0000:03:00.0: PME# disabled
[ 1.439977] pci 0000:00:1c.1: bridge io port: [0x5000-0x5fff]
[ 1.439981] pci 0000:00:1c.1: bridge 32bit mmio: [0xe8400000-0xe93fffff]
[ 1.439988] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe1400000-0xe23fffff]
[ 1.440154] pci 0000:04:00.0: reg 10 io port: [0x4000-0x40ff]
[ 1.440232] pci 0000:04:00.0: reg 18 64bit mmio: [0xe2404000-0xe2404fff]
[ 1.440284] pci 0000:04:00.0: reg 20 64bit mmio: [0xe2400000-0xe2403fff]
[ 1.440311] pci 0000:04:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 1.440453] pci 0000:04:00.0: supports D1 D2
[ 1.440454] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.440469] pci 0000:04:00.0: PME# disabled
[ 1.440617] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
[ 1.440622] pci 0000:00:1c.2: bridge 32bit mmio: [0xe7400000-0xe83fffff]
[ 1.440629] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe2400000-0xe33fffff]
[ 1.440683] pci 0000:00:1c.3: bridge io port: [0x3000-0x3fff]
[ 1.440687] pci 0000:00:1c.3: bridge 32bit mmio: [0xe6400000-0xe73fffff]
[ 1.440695] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe3400000-0xe43fffff]
[ 1.440748] pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
[ 1.440753] pci 0000:00:1c.4: bridge 32bit mmio: [0xe5400000-0xe63fffff]
[ 1.440760] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xe4400000-0xe53fffff]
[ 1.440815] pci 0000:00:1e.0: transparent bridge
[ 1.440868] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.441081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 1.441218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.441409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.441516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.441637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.441744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.441864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.442164] _OSC invalid UUID
[ 1.469398] ACPI: PCI Root Bridge [CPBG] (0000:7f)
[ 1.469794] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 1.469953] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.470110] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.470270] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.470429] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 1.470586] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.470742] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 1.470901] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.471061] SCSI subsystem initialized
[ 1.471137] libata version 3.00 loaded.
[ 1.471196] usbcore: registered new interface driver usbfs
[ 1.471207] usbcore: registered new interface driver hub
[ 1.471223] usbcore: registered new device driver usb
[ 1.471330] ACPI: WMI: Mapper loaded
[ 1.471332] PCI: Using ACPI for IRQ routing
[ 1.500116] Bluetooth: Core ver 2.15
[ 1.500150] NET: Registered protocol family 31
[ 1.500152] Bluetooth: HCI device and connection manager initialized
[ 1.500154] Bluetooth: HCI socket layer initialized
[ 1.500156] NetLabel: Initializing
[ 1.500157] NetLabel: domain hash size = 128
[ 1.500158] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.500171] NetLabel: unlabeled traffic allowed by default
[ 1.500218] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 1.500223] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.507700] hpet: hpet2 irq 24 for MSI
[ 1.510041] hpet: hpet3 irq 25 for MSI
[ 1.519428] hpet: hpet4 irq 26 for MSI
[ 1.520087] hpet: hpet5 irq 27 for MSI
[ 1.527655] Switched to high resolution mode on CPU 0
[ 1.529397] Switched to high resolution mode on CPU 2
[ 1.529990] Switched to high resolution mode on CPU 1
[ 1.530055] Switched to high resolution mode on CPU 3
[ 1.549492] pnp: PnP ACPI init
[ 1.549509] ACPI: bus type pnp registered
[ 1.670105] alloc irq_desc for 23 on node 0
[ 1.670107] alloc kstat_irqs on node 0
[ 1.670787] pnp: PnP ACPI: found 14 devices
[ 1.670789] ACPI: ACPI bus type pnp unregistered
[ 1.670798] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 1.670803] system 00:06: ioport range 0x680-0x69f has been reserved
[ 1.670805] system 00:06: ioport range 0x800-0x80f has been reserved
[ 1.670807] system 00:06: ioport range 0x810-0x813 has been reserved
[ 1.670809] system 00:06: ioport range 0xffff-0xffff has been reserved
[ 1.670811] system 00:06: ioport range 0x400-0x47f has been reserved
[ 1.670813] system 00:06: ioport range 0x500-0x57f has been reserved
[ 1.670815] system 00:06: ioport range 0x164e-0x164f has been reserved
[ 1.670819] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 1.670820] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 1.670825] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.670827] system 00:0b: iomem range 0xfed10000-0xfed13fff has been reserved
[ 1.670829] system 00:0b: iomem range 0xfed18000-0xfed18fff has been reserved
[ 1.670831] system 00:0b: iomem range 0xfed19000-0xfed19fff has been reserved
[ 1.670833] system 00:0b: iomem range 0xf0000000-0xf1ffffff has been reserved
[ 1.670835] system 00:0b: iomem range 0xea600000-0xea600fff has been reserved
[ 1.670837] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.670839] system 00:0b: iomem range 0xfeb00000-0xfeb03fff has been reserved
[ 1.670841] system 00:0b: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.670844] system 00:0b: iomem range 0xff000000-0xffffffff could not be reserved
[ 1.670846] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 1.670848] system 00:0b: iomem range 0xea600000-0xea600fff has been reserved
[ 1.675478] AppArmor: AppArmor Filesystem Enabled
[ 1.675488] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 1.675491] pci 0000:04:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 1.675553] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.675555] pci 0000:00:01.0: IO window: 0x7000-0x7fff
[ 1.675558] pci 0000:00:01.0: MEM window: 0xea400000-0xea4fffff
[ 1.675560] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 1.675564] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.675567] pci 0000:00:1c.0: IO window: 0x6000-0x6fff
[ 1.675573] pci 0000:00:1c.0: MEM window: 0xe9400000-0xea3fffff
[ 1.675577] pci 0000:00:1c.0: PREFETCH window: 0x000000e0400000-0x000000e13fffff
[ 1.675585] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 1.675588] pci 0000:00:1c.1: IO window: 0x5000-0x5fff
[ 1.675594] pci 0000:00:1c.1: MEM window: 0xe8400000-0xe93fffff
[ 1.675598] pci 0000:00:1c.1: PREFETCH window: 0x000000e1400000-0x000000e23fffff
[ 1.675606] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 1.675609] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 1.675615] pci 0000:00:1c.2: MEM window: 0xe7400000-0xe83fffff
[ 1.675619] pci 0000:00:1c.2: PREFETCH window: 0x000000e2400000-0x000000e33fffff
[ 1.675626] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 1.675630] pci 0000:00:1c.3: IO window: 0x3000-0x3fff
[ 1.675635] pci 0000:00:1c.3: MEM window: 0xe6400000-0xe73fffff
[ 1.675640] pci 0000:00:1c.3: PREFETCH window: 0x000000e3400000-0x000000e43fffff
[ 1.675647] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08
[ 1.675651] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 1.675656] pci 0000:00:1c.4: MEM window: 0xe5400000-0xe63fffff
[ 1.675660] pci 0000:00:1c.4: PREFETCH window: 0x000000e4400000-0x000000e53fffff
[ 1.675667] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
[ 1.675668] pci 0000:00:1e.0: IO window: disabled
[ 1.675674] pci 0000:00:1e.0: MEM window: disabled
[ 1.675678] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.675687] alloc irq_desc for 16 on node 0
[ 1.675688] alloc kstat_irqs on node 0
[ 1.675692] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.675695] pci 0000:00:01.0: setting latency timer to 64
[ 1.675702] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.675706] pci 0000:00:1c.0: setting latency timer to 64
[ 1.675714] alloc irq_desc for 17 on node 0
[ 1.675715] alloc kstat_irqs on node 0
[ 1.675718] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.675722] pci 0000:00:1c.1: setting latency timer to 64
[ 1.675730] alloc irq_desc for 18 on node 0
[ 1.675731] alloc kstat_irqs on node 0
[ 1.675734] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.675738] pci 0000:00:1c.2: setting latency timer to 64
[ 1.675745] alloc irq_desc for 19 on node 0
[ 1.675747] alloc kstat_irqs on node 0
[ 1.675749] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.675754] pci 0000:00:1c.3: setting latency timer to 64
[ 1.675762] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.675766] pci 0000:00:1c.4: setting latency timer to 64
[ 1.675773] pci 0000:00:1e.0: setting latency timer to 64
[ 1.675778] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.675779] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.675781] pci_bus 0000:01: resource 0 io: [0x7000-0x7fff]
[ 1.675783] pci_bus 0000:01: resource 1 mem: [0xea400000-0xea4fffff]
[ 1.675785] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 1.675787] pci_bus 0000:02: resource 0 io: [0x6000-0x6fff]
[ 1.675788] pci_bus 0000:02: resource 1 mem: [0xe9400000-0xea3fffff]
[ 1.675790] pci_bus 0000:02: resource 2 pref mem [0xe0400000-0xe13fffff]
[ 1.675792] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
[ 1.675793] pci_bus 0000:03: resource 1 mem: [0xe8400000-0xe93fffff]
[ 1.675795] pci_bus 0000:03: resource 2 pref mem [0xe1400000-0xe23fffff]
[ 1.675797] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
[ 1.675798] pci_bus 0000:04: resource 1 mem: [0xe7400000-0xe83fffff]
[ 1.675800] pci_bus 0000:04: resource 2 pref mem [0xe2400000-0xe33fffff]
[ 1.675802] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff]
[ 1.675803] pci_bus 0000:05: resource 1 mem: [0xe6400000-0xe73fffff]
[ 1.675805] pci_bus 0000:05: resource 2 pref mem [0xe3400000-0xe43fffff]
[ 1.675807] pci_bus 0000:08: resource 0 io: [0x2000-0x2fff]
[ 1.675808] pci_bus 0000:08: resource 1 mem: [0xe5400000-0xe63fffff]
[ 1.675810] pci_bus 0000:08: resource 2 pref mem [0xe4400000-0xe53fffff]
[ 1.675812] pci_bus 0000:09: resource 3 io: [0x00-0xffff]
[ 1.675814] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.675815] pci_bus 0000:7f: resource 0 io: [0x00-0xffff]
[ 1.675817] pci_bus 0000:7f: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.675848] NET: Registered protocol family 2
[ 1.675986] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.676824] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.679320] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.679618] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.679620] TCP reno registered
[ 1.679718] NET: Registered protocol family 1
[ 1.679768] Trying to unpack rootfs image as initramfs...
[ 1.803347] Freeing initrd memory: 6759k freed
[ 1.804808] Simple Boot Flag at 0x44 set to 0x1
[ 1.805048] Scanning for low memory corruption every 60 seconds
[ 1.805151] audit: initializing netlink socket (disabled)
[ 1.805165] type=2000 audit(1268254753.651:1): initialized
[ 1.813632] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.814679] VFS: Disk quotas dquot_6.5.2
[ 1.814721] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.815157] fuse init (API version 7.12)
[ 1.815215] msgmni has been set to 7526
[ 1.815391] alg: No test for stdrng (krng)
[ 1.815399] io scheduler noop registered
[ 1.815400] io scheduler anticipatory registered
[ 1.815402] io scheduler deadline registered (default)
[ 1.815433] io scheduler cfq registered
[ 1.815444] pci 0000:00:02.0: Boot video device
[ 1.849177] alloc irq_desc for 29 on node 0
[ 1.849179] alloc kstat_irqs on node 0
[ 1.849187] pcieport-driver 0000:00:01.0: irq 29 for MSI/MSI-X
[ 1.849192] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.849308] alloc irq_desc for 30 on node 0
[ 1.849309] alloc kstat_irqs on node 0
[ 1.849317] pcieport-driver 0000:00:1c.0: irq 30 for MSI/MSI-X
[ 1.849327] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.849467] alloc irq_desc for 31 on node 0
[ 1.849469] alloc kstat_irqs on node 0
[ 1.849477] pcieport-driver 0000:00:1c.1: irq 31 for MSI/MSI-X
[ 1.849487] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.849627] alloc irq_desc for 32 on node 0
[ 1.849629] alloc kstat_irqs on node 0
[ 1.849637] pcieport-driver 0000:00:1c.2: irq 32 for MSI/MSI-X
[ 1.849646] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.849789] alloc irq_desc for 33 on node 0
[ 1.849790] alloc kstat_irqs on node 0
[ 1.849799] pcieport-driver 0000:00:1c.3: irq 33 for MSI/MSI-X
[ 1.849808] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.849948] alloc irq_desc for 34 on node 0
[ 1.849949] alloc kstat_irqs on node 0
[ 1.849957] pcieport-driver 0000:00:1c.4: irq 34 for MSI/MSI-X
[ 1.849967] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.850053] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.850233] _OSC invalid UUID
[ 1.850368] _OSC invalid UUID
[ 1.850498] _OSC invalid UUID
[ 1.850628] _OSC invalid UUID
[ 1.850757] _OSC invalid UUID
[ 1.850900] _OSC invalid UUID
[ 1.851029] _OSC invalid UUID
[ 1.851158] _OSC invalid UUID
[ 1.851287] _OSC invalid UUID
[ 1.851417] _OSC invalid UUID
[ 1.851445] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.986941] ACPI: AC Adapter [AC] (on-line)
[ 1.987011] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.987015] ACPI: Power Button [PWRF]
[ 1.987050] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.987052] ACPI: Power Button [PWRB]
[ 1.987081] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.987168] ACPI: Lid Switch [LID0]
[ 1.987198] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.987204] ACPI: Sleep Button [SLPB]
[ 2.011781] fan PNP0C0B:00: registered as cooling_device0
[ 2.011786] ACPI: Fan [FAN0] (on)
[ 2.037682] fan PNP0C0B:01: registered as cooling_device1
[ 2.037686] ACPI: Fan [FAN1] (on)
[ 2.039315] ACPI: SSDT 00000000bb691c18 003A0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 2.039939] ACPI: SSDT 00000000bb68fa18 004D1 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 2.040553] Monitor-Mwait will be used to enter C-1 state
[ 2.040573] Monitor-Mwait will be used to enter C-2 state
[ 2.040587] Monitor-Mwait will be used to enter C-3 state
[ 2.040607] ACPI: CPU0 (power states: C1[C1] C3[C3])
[ 2.040619] processor LNXCPU:00: registered as cooling_device2
[ 2.040622] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.041218] ACPI: SSDT 00000000bb690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 2.041797] ACPI: SSDT 00000000bb68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 2.042559] ACPI: CPU1 (power states: C1[C1] C3[C3])
[ 2.042573] processor LNXCPU:01: registered as cooling_device3
[ 2.042575] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.043520] ACPI: CPU2 (power states: C1[C1] C3[C3])
[ 2.043534] processor LNXCPU:02: registered as cooling_device4
[ 2.043536] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 2.044465] ACPI: CPU3 (power states: C1[C1] C3[C3])
[ 2.044478] processor LNXCPU:03: registered as cooling_device5
[ 2.044481] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 2.210201] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.210207] ACPI: Thermal Zone [THRM] (59 C)
[ 2.211097] Linux agpgart interface v0.103
[ 2.211105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.211968] brd: module loaded
[ 2.212263] loop: module loaded
[ 2.212310] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.212393] ahci 0000:00:1f.2: version 3.0
[ 2.212408] alloc irq_desc for 21 on node 0
[ 2.212411] alloc kstat_irqs on node 0
[ 2.212418] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.212454] alloc irq_desc for 35 on node 0
[ 2.212455] alloc kstat_irqs on node 0
[ 2.212464] ahci 0000:00:1f.2: irq 35 for MSI/MSI-X
[ 2.212495] ahci: SSS flag set, parallel bus scan disabled
[ 2.212537] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[ 2.212539] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems
[ 2.212544] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.246387] scsi0 : ahci
[ 2.246475] scsi1 : ahci
[ 2.246514] scsi2 : ahci
[ 2.246552] scsi3 : ahci
[ 2.246592] scsi4 : ahci
[ 2.246717] ata1: SATA max UDMA/133 abar m2048@0xea505000 port 0xea505100 irq 35
[ 2.246720] ata2: SATA max UDMA/133 abar m2048@0xea505000 port 0xea505180 irq 35
[ 2.246722] ata3: DUMMY
[ 2.246723] ata4: DUMMY
[ 2.246725] ata5: SATA max UDMA/133 abar m2048@0xea505000 port 0xea505300 irq 35
[ 2.247457] Fixed MDIO Bus: probed
[ 2.247479] PPP generic driver version 2.4.2
[ 2.247538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.247573] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.247586] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.247590] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.247630] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.251573] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.251584] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 2.251601] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xea505c00
[ 2.266287] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.266386] usb usb1: configuration #1 chosen from 1 choice
[ 2.266414] hub 1-0:1.0: USB hub found
[ 2.266419] hub 1-0:1.0: 3 ports detected
[ 2.266487] alloc irq_desc for 20 on node 0
[ 2.266489] alloc kstat_irqs on node 0
[ 2.266493] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.266504] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.266507] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.266532] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.270467] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.270473] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 2.270485] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xea505800
[ 2.286248] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.286331] usb usb2: configuration #1 chosen from 1 choice
[ 2.286362] hub 2-0:1.0: USB hub found
[ 2.286366] hub 2-0:1.0: 3 ports detected
[ 2.286412] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.286423] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.286497] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.311726] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.311731] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.311777] mice: PS/2 mouse device common for all mice
[ 2.311862] rtc_cmos 00:08: RTC can wake from S4
[ 2.311887] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 2.311917] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.311990] device-mapper: uevent: version 1.0.3
[ 2.312694] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 2.312760] device-mapper: multipath: version 1.1.0 loaded
[ 2.312762] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.312977] cpuidle: using governor ladder
[ 2.313081] cpuidle: using governor menu
[ 2.313399] TCP cubic registered
[ 2.313494] NET: Registered protocol family 10
[ 2.313835] lo: Disabled Privacy Extensions
[ 2.314047] NET: Registered protocol family 17
[ 2.314062] Bluetooth: L2CAP ver 2.13
[ 2.314063] Bluetooth: L2CAP socket layer initialized
[ 2.314065] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.314066] Bluetooth: SCO socket layer initialized
[ 2.314085] Bluetooth: RFCOMM TTY layer initialized
[ 2.314088] Bluetooth: RFCOMM socket layer initialized
[ 2.314089] Bluetooth: RFCOMM ver 1.11
[ 2.315598] PM: Resume from disk failed.
[ 2.315607] registered taskstats version 1
[ 2.315728] Magic number: 2:297:1003
[ 2.315750] vc vcs: hash matches
[ 2.315755] input input0: hash matches
[ 2.315762] pnp 00:05: hash matches
[ 2.315845] rtc_cmos 00:08: setting system clock to 2010-03-10 20:59:14 UTC (1268254754)
[ 2.315848] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.315850] EDD information not available.
[ 2.334236] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.586389] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.596947] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.599186] ata1.00: ATA-8: WDC WD3200BEKT-60V5T1, 12.01A12, max UDMA/100
[ 2.599191] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.601559] ata1.00: configured for UDMA/100
[ 2.667865] ACPI: Battery Slot [BAT0] (battery present)
[ 2.668017] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-6 12.0 PQ: 0 ANSI: 5
[ 2.668110] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.668112] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.668151] sd 0:0:0:0: [sda] Write Protect is off
[ 2.668154] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.668167] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.668260] sda: sda1 sda2 sda3 sda4 < sda5
[ 2.736656] usb 1-1: configuration #1 chosen from 1 choice
[ 2.736822] sda6 >
[ 2.736864] hub 1-1:1.0: USB hub found
[ 2.737033] hub 1-1:1.0: 6 ports detected
[ 2.737155] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.855270] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 3.006041] usb 2-1: configuration #1 chosen from 1 choice
[ 3.006256] hub 2-1:1.0: USB hub found
[ 3.006480] hub 2-1:1.0: 8 ports detected
[ 3.084945] usb 1-1.5: new full speed USB device using ehci_hcd and address 3
[ 3.200187] usb 1-1.5: configuration #1 chosen from 1 choice
[ 3.284711] usb 2-1.5: new high speed USB device using ehci_hcd and address 3
[ 3.414239] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.417054] ata2.00: ATAPI: hp DVDRAM GT30L, mP04, max UDMA/100, ATAPI AN
[ 3.420068] ata2.00: configured for UDMA/100
[ 3.435481] scsi 1:0:0:0: CD-ROM hp DVDRAM GT30L mP04 PQ: 0 ANSI: 5
[ 3.437646] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.437651] Uniform CD-ROM driver Revision: 3.20
[ 3.437737] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.437784] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.481276] usb 2-1.5: configuration #1 chosen from 1 choice
[ 3.774180] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.794203] Freeing unused kernel memory: 660k freed
[ 3.794319] Write protecting the kernel read-only data: 7572k
[ 4.101088] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.101132] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.101251] r8169 0000:04:00.0: setting latency timer to 64
[ 4.101422] alloc irq_desc for 36 on node 0
[ 4.101425] alloc kstat_irqs on node 0
[ 4.101466] r8169 0000:04:00.0: irq 36 for MSI/MSI-X
[ 4.102106] eth0: RTL8168d/8111d at 0xffffc90009194000, 00:26:22:bc:3b:c4, XID 283000c0 IRQ 36
[ 4.566884] PM: Starting manual resume from disk
[ 4.566888] PM: Resume from partition 8:6
[ 4.566889] PM: Checking hibernation image.
[ 4.567107] PM: Resume from disk failed.
[ 4.574627] EXT4-fs (sda5): barriers enabled
[ 4.589651] kjournald2 starting: pid 396, dev sda5:8, commit interval 5 seconds
[ 4.589676] EXT4-fs (sda5): delayed allocation enabled
[ 4.589681] EXT4-fs: file extents enabled
[ 4.597451] EXT4-fs: mballoc enabled
[ 4.597466] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 5.084623] type=1505 audit(1268254757.272:2): operation="profile_load" pid=417 name=/sbin/dhclient3
[ 5.085059] type=1505 audit(1268254757.272:3): operation="profile_load" pid=417 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 5.085289] type=1505 audit(1268254757.272:4): operation="profile_load" pid=417 name=/usr/lib/connman/scripts/dhclient-script
[ 5.090828] type=1505 audit(1268254757.272:5): operation="profile_load" pid=418 name=/usr/sbin/tcpdump
[ 5.730347] Adding 6337600k swap on /dev/sda6. Priority:-1 extents:1 across:6337600k
[ 5.874484] udev: starting version 147
[ 6.014036] EXT4-fs (sda5): internal journal on sda5:8
[ 6.106907] lp: driver loaded but no devices found
[ 6.190745] agpgart-intel 0000:00:00.0: Intel IGDNG/M Chipset
[ 6.191380] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 6.200011] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 6.495664] lirc_dev: IR Remote Control driver registered, major 61
[ 6.520996] [drm] Initialized drm 1.1.0 20060810
[ 6.521545] lirc_dev: lirc_register_driver: sample_rate: 0
[ 6.521662] enecir: unknown ENE chip detected, assuming KB3926D
[ 6.521664] enecir: driver support incomplete
[ 6.521668] enecir: chip is 0x3926 - 0x00, 0xd2
[ 6.521677] enecir: hardware features:
[ 6.521678] enecir: learning and tx off, gpio40_learn off, fan_in off
[ 6.521680] enecir: driver has been succesfully loaded
[ 6.524577] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 6.524662] usbcore: registered new interface driver btusb
[ 6.608265] lis3lv02d: laptop model unknown, using default axes configuration
[ 6.609084] lis3lv02d: 1-byte sensor found
[ 6.618733] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 6.618798] Registered led device: hp::hddprotect
[ 6.618814] lis3lv02d driver loaded.
[ 6.660158] cfg80211: Calling CRDA to update world regulatory domain
[ 6.751178] [drm] radeon default to kernel modesetting DISABLED.
[ 6.751656] pci 0000:01:00.0: power state changed by ACPI to D0
[ 6.751662] pci 0000:01:00.0: enabling device (0006 -> 0007)
[ 6.751670] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.751675] pci 0000:01:00.0: setting latency timer to 64
[ 6.751842] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 6.828104] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.828109] i915 0000:00:02.0: setting latency timer to 64
[ 6.842936] alloc irq_desc for 37 on node 0
[ 6.842940] alloc kstat_irqs on node 0
[ 6.842948] i915 0000:00:02.0: irq 37 for MSI/MSI-X
[ 6.922435] Linux video capture interface: v2.00
[ 7.076475] [drm] fb0: inteldrmfb frame buffer device
[ 7.076482] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[ 7.076705] alloc irq_desc for 22 on node 0
[ 7.076707] alloc kstat_irqs on node 0
[ 7.076714] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 7.076754] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.081773] uvcvideo: Found UVC 1.00 device HP Webcam 101 (064e:c108)
[ 7.095093] input: HP Webcam 101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7
[ 7.095150] usbcore: registered new interface driver uvcvideo
[ 7.095154] USB Video Class driver (v0.1.0)
[ 7.190795] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.209643] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 7.373149] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 7.462467] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 7.485709] [drm] LVDS-8: set mode 1366x768 e
[ 7.510548] cfg80211: World regulatory domain updated:
[ 7.510550] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.510552] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.510554] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.510556] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.510557] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.510559] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.879085] Console: switching to colour frame buffer device 170x48
[ 7.881987] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.882061] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.882247] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.882263] ath9k 0000:03:00.0: setting latency timer to 64
[ 7.932029] ath: EEPROM regdomain: 0x6a
[ 7.932031] ath: EEPROM indicates we should expect a direct regpair map
[ 7.932034] ath: Country alpha2 being used: 00
[ 7.932035] ath: Regpair used: 0x6a
[ 7.932436] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.932491] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 7.962756] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 7.963237] Registered led device: ath9k-phy0::radio
[ 7.963248] Registered led device: ath9k-phy0::assoc
[ 7.963259] Registered led device: ath9k-phy0::tx
[ 7.963272] Registered led device: ath9k-phy0::rx
[ 7.963282] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xffffc900098e0000, irq=17
[ 8.143590] type=1505 audit(1268218760.330:6): operation="profile_replace" pid=815 name=/sbin/dhclient3
[ 8.144018] type=1505 audit(1268218760.330:7): operation="profile_replace" pid=815 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 8.144248] type=1505 audit(1268218760.330:8): operation="profile_replace" pid=815 name=/usr/lib/connman/scripts/dhclient-script
[ 8.145324] type=1505 audit(1268218760.330:9): operation="profile_replace" pid=816 name=/usr/sbin/tcpdump
00:00.0 Host bridge [0600]: Intel Corporation Arrandale DRAM Controller [8086:0044] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation Arrandale PCI Express x16 Root Port [8086:0045] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: ea400000-ea4fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Hewlett-Packard Company Device [103c:1404]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 4199
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 11, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:02.0 VGA compatible controller [0300]: Intel Corporation Arrandale Integrated Graphics Controller [8086:0046] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1407]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 37
Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 8050 [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 41e9
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCIe advanced features <?>
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ea506100 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ea505c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: Memory at ea500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: e9400000-ea3fffff
Prefetchable memory behind bridge: 00000000e0400000-00000000e13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 0, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 41a1
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:1404]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: e8400000-e93fffff
Prefetchable memory behind bridge: 00000000e1400000-00000000e23fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 1, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 41a9
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:1404]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: e7400000-e83fffff
Prefetchable memory behind bridge: 00000000e2400000-00000000e33fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 2, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 41b1
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:1404]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e6400000-e73fffff
Prefetchable memory behind bridge: 00000000e3400000-00000000e43fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 3, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 41b9
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:1404]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e5400000-e63fffff
Prefetchable memory behind bridge: 00000000e4400000-00000000e53fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 4, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 41c1
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:1404]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ea505800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:1404]
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 35
Region 0: I/O ports at 8048 [size=8]
Region 1: I/O ports at 805c [size=4]
Region 2: I/O ports at 8040 [size=8]
Region 3: I/O ports at 8058 [size=4]
Region 4: I/O ports at 8020 [size=32]
Region 5: Memory at ea505000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 41d1
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at ea506000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 8000 [size=32]
Kernel modules: i2c-i801
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 0: Memory at ea504000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M93 [Mobility Radeon HD 4500 Series] [1002:9555]
Subsystem: Hewlett-Packard Company Device [103c:1407]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 7000 [size=256]
Region 2: Memory at ea400000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ea420000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific Information <?>
Kernel modules: radeon
01:00.1 Audio device [0403]: ATI Technologies Inc R700 Audio Device [Radeon HD 4000 Series] [1002:aa38]
Subsystem: Hewlett-Packard Company Device [103c:1407]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ea410000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
03:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3040]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e8400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 12-14-24-ff-ff-17-15-00
Capabilities: [170] Power Budgeting <?>
Kernel driver in use: ath9k
Kernel modules: ath9k
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:1407]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 36
Region 0: I/O ports at 4000 [size=256]
Region 2: Memory at e2404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at e2400000 (64-bit, prefetchable) [size=16K]
Expansion ROM at e2420000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0f00c Data: 41e1
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-e0-4c-68-00-00-00-13
Kernel driver in use: r8169
Kernel modules: r8169
7f:00.0 Host bridge [0600]: Intel Corporation QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:00.1 Host bridge [0600]: Intel Corporation QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.0 Host bridge [0600]: Intel Corporation QPI Link 0 [8086:2d10] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.1 Host bridge [0600]: Intel Corporation QPI Physical 0 [8086:2d11] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.2 Host bridge [0600]: Intel Corporation Device [8086:2d12] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.3 Host bridge [0600]: Intel Corporation Device [8086:2d13] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1404]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
