hybrid-graphics-linux team mailing list archive

[Olivier Robert <robby57@xxxxxxxxx>]

When fedora 13 starts up, it actually loads both the intel and nouveau
driver:

[root@optimus acpi_call]# lsmod | grep nouveau
nouveau               381177  0
ttm                    53215  1 nouveau
drm_kms_helper         23936  2 nouveau,i915
drm                   169089  5 nouveau,i915,ttm,drm_kms_helper
i2c_algo_bit            4781  2 nouveau,i915
i2c_core               24507  6
videodev,nouveau,i915,drm_kms_helper,drm,i2c_algo_bit
video                  20741  2 nouveau,i915
[root@optimus acpi_call]#

I did not try the nvidia binary drivers: the latest don't even work on
windows, so I doubt they'd work on linux. As anyone succeeded to run the
binary drivers?

Regards,

++
Robby


2010/8/25 Albert Vilella <avilella@xxxxxxxxx>

> And can you get the nvidia binary drivers or the nouveau drivers to
> work when it's switched on?
>
> On Wed, Aug 25, 2010 at 6:31 PM, Olivier Robert <robby57@xxxxxxxxx> wrote:
> > Hi guys,
> >
> > Here's for the Asus U35JC that works successfully with
> > \_SB.PCI0.PEG1.GFX0._OFF saving ~ 3654 mW !!! (see test below)
> >
> > Noticed the revision change in the lspci output from "rev a2" to "rev
> ff".
> > Any one else noticed this? If someone has a clue why, I'd be happy to be
> > educated :-)
> >
> > ============================================
> > [root@optimus acpi_call]# cat /proc/acpi/battery/BAT0/state
> > present:                 yes
> > capacity state:          ok
> > charging state:          discharging
> > present rate:            14056 m
> > remaining capacity:      79562 mWh
> > present voltage:         16330 mV
> > [root@optimus acpi_call]# lspci | grep nVidia
> > 01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce
> 310M]
> > (rev a2)
> > [root@optimus acpi_call]# insmod acpi_call.ko
> > [root@optimus acpi_call]# ./test_off.sh
> > Trying \_SB.PCI0.P0P1.VGA._OFF: failed
> > Trying \_SB_.PCI0.OVGA.ATPX: failed
> > Trying \_SB_.PCI0.OVGA.XTPX: failed
> > Trying \_SB.PCI0.P0P2.PEGP._OFF: failed
> > Trying \_SB.PCI0.MXR0.MXM0._OFF: failed
> > Trying \_SB.PCI0.PEG1.GFX0._OFF: works!
> > [root@optimus acpi_call]# cat /proc/acpi/battery/BAT0/state
> > present:                 yes
> > capacity state:          ok
> > charging state:          discharging
> > present rate:            10402 mW
> > remaining capacity:      79478 mWh
> > present voltage:         16346 mV
> > [root@optimus acpi_call]# lspci | grep nVidia
> > 01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce
> 310M]
> > (rev ff)
> > [root@optimus acpi_call]#
> > ============================================
> >
> > Thanks and regards,
> >
> > ++
> > Robby
> >
> > 2010/8/25 Michal Kottman <k0mpjut0r@xxxxxxxxx>
> >>
> >> On Tue, 2010-08-24 at 15:27 +0100, Albert Vilella wrote:
> >> > Thanks,
> >> >
> >> > Asus N71jv
> >> > Asus N82JV
> >> > Asus U30JC
> >> >
> >> > so far.
> >>
> >> You can add my Asus K52JC with Gf310m to this list
> >>
> >>
> >> _______________________________________________
> >> Mailing list: https://launchpad.net/~hybrid-graphics-linux<https://launchpad.net/%7Ehybrid-graphics-linux>
> >> Post to     : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
> >> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux<https://launchpad.net/%7Ehybrid-graphics-linux>
> >> More help   : https://help.launchpad.net/ListHelp
> >
> >
>