hybrid-graphics-linux team mailing list archive
-
hybrid-graphics-linux team
-
Mailing list archive
-
Message #01024
Re: Optimus Solution found!!!! Using my Nvidia card in my Alienware M11X R2!!!
I did what Sunil suggested and it seems to work, but the display has some
bugs. The icons are surrounded by a black box.
vglrun gxlgears gives:
[VGL] WARNING: VirtualGL attempted and failed to obtain a Pbuffer-enabled
[VGL] 24-bit visual on the 3D X server :0. If the application
[VGL] subsequently fails, then make sure that the 3D X server is
configured
[VGL] for 24-bit color and has accelerated 3D drivers installed.
Error: couldn't get an RGB, Double-buffered visual
When I run nvidia-settings, it goes to a black screen. And stop working. I
still can get to the terminal if I press ctrl-alt-F1 but no way to go back.
posting new xorg.log. Any suggestions?
On Fri, May 6, 2011 at 1:58 PM, Albert Vilella <avilella@xxxxxxxxx> wrote:
> You don't get anything out of "sudo nvidia-settings" when plugging in the
> external monitor? Have you tried HDMI or VGA?
>
>
> On Fri, May 6, 2011 at 3:06 PM, David Mackenzie <dmackenz1981@xxxxxxxxx>wrote:
>
>> Hi Martin and other Optimus people,
>>
>> First, a big thank you to Martin for this solution. I have my external
>> Samsung monitor working with nvidia proprietry drivers on Ubuntu 11.04 with
>> gnome and compiz 3d effects working using this solution, however, I am
>> unable to get any display on my laptop LVDS. I have tried hacking around
>> with various xorg configs but can't get any output on the laptop screen.
>>
>> Does anyone have dual screen working? If so, what is your xorg config?
>>
>> For the record I have the following hardware:
>>
>> Dell XPS L502X with:
>>
>> a) 2nd generation Intel® Core? i5-2410M processor 2.30 GHz with Turbo
>> Boost 2.0 up to 2.90 GHz PCI:0:2:0
>> b) 2GB NVIDIA® GeForce® GT 540M graphics with Optimus PCI:1:0:0
>>
>> Thanks everyone for your efforts so far. As someone else said, we all owe
>> Martin a beer.
>>
>> Cheers,
>> Dave.
>>
>>
>>
>> On 6 May 2011 02:59, Martin Juhl <mj@xxxxxxxxxxxx> wrote:
>>
>>> Hi..
>>>
>>> What are you using for testing...
>>>
>>> I'm using glxgears and getting:
>>>
>>> ~ 1700 fps with libjpeg-turbo
>>>
>>> 7362 frames in 5.0 seconds = 1472.247 FPS
>>> 6651 frames in 5.0 seconds = 1330.055 FPS
>>> 6507 frames in 5.0 seconds = 1301.198 FPS
>>> 9399 frames in 5.0 seconds = 1879.629 FPS
>>> 9519 frames in 5.0 seconds = 1903.788 FPS
>>> 8857 frames in 5.0 seconds = 1771.247 FPS
>>> 9524 frames in 5.0 seconds = 1904.607 FPS
>>> 8545 frames in 5.0 seconds = 1708.921 FPS
>>> 9485 frames in 5.0 seconds = 1896.910 FPS
>>> 9495 frames in 5.0 seconds = 1898.814 FPS
>>>
>>> ~ 1600 fps with turbojpeg
>>>
>>> 6580 frames in 5.0 seconds = 1315.794 FPS
>>> 7177 frames in 5.0 seconds = 1435.397 FPS
>>> 9346 frames in 5.0 seconds = 1869.135 FPS
>>> 8206 frames in 5.0 seconds = 1641.097 FPS
>>> 6429 frames in 5.0 seconds = 1285.784 FPS
>>> 7006 frames in 5.0 seconds = 1401.094 FPS
>>> 6229 frames in 5.0 seconds = 1245.770 FPS
>>> 7559 frames in 5.0 seconds = 1511.768 FPS
>>> 8541 frames in 5.0 seconds = 1708.090 FPS
>>> 8503 frames in 5.0 seconds = 1700.564 FPS
>>> 8501 frames in 5.0 seconds = 1700.139 FPS
>>> 8540 frames in 5.0 seconds = 1707.930 FPS
>>>
>>>
>>> ~ 1900 fps with none of them installed
>>>
>>> 7621 frames in 5.0 seconds = 1524.158 FPS
>>> 9526 frames in 5.0 seconds = 1905.055 FPS
>>> 9504 frames in 5.0 seconds = 1900.725 FPS
>>> 9487 frames in 5.0 seconds = 1897.317 FPS
>>> 9419 frames in 5.0 seconds = 1883.613 FPS
>>> 8754 frames in 5.0 seconds = 1750.718 FPS
>>> 9435 frames in 5.0 seconds = 1886.882 FPS
>>> 9400 frames in 5.0 seconds = 1879.999 FPS
>>> 9408 frames in 5.0 seconds = 1881.523 FPS
>>>
>>>
>>> ~ 1600 fps with xuv
>>>
>>> 7888 frames in 5.0 seconds = 1577.544 FPS
>>> 7906 frames in 5.0 seconds = 1581.168 FPS
>>> 7963 frames in 5.0 seconds = 1592.556 FPS
>>> 8090 frames in 5.0 seconds = 1617.894 FPS
>>> 8122 frames in 5.0 seconds = 1624.336 FPS
>>> 8204 frames in 5.0 seconds = 1640.684 FPS
>>> 8377 frames in 5.0 seconds = 1675.184 FPS
>>> 8288 frames in 5.0 seconds = 1657.548 FPS
>>> 8399 frames in 5.0 seconds = 1679.671 FPS
>>>
>>> /Martin
>>>
>>> ------------------------------
>>> *Fra: *"Ellington Santos" <ellington@xxxxxxxxxxxxx>
>>> *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>> *Sendt: *torsdag, 5. maj 2011 17:23:31
>>>
>>> *Emne: *Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using my
>>> Nvidia card in my Alienware M11X R2!!!
>>>
>>> Look my tests with libjpeg-turbo and turbojpeg-ipp:
>>>
>>>
>>> 1) libjpeg-turbo-1.1.0:
>>>
>>> I got around 170fps without VGL_COMPRESS and around 130fps with
>>> VGL_COMPRESS=jpeg.
>>>
>>> 2) turbojpeg-ipp-1.11.1:
>>>
>>> I got around 290fps without VGL_COMPRESS and around 350fps with
>>> VGL_COMPRESS=jpeg.
>>>
>>> My hardware:
>>>
>>> Asus Eeepc1215N,
>>>
>>> 00:02.0 VGA compatible controller: Intel Corporation N10 Family
>>> Integrated Graphics Controller (rev 02)
>>> 04:00.0 VGA compatible controller: nVidia Corporation Device 0a76 (rev
>>> a2)
>>>
>>> NVIDIA ION2 Optimus.
>>>
>>> Att,
>>>
>>> Ellington Santos
>>>
>>>
>>> On Thu, May 5, 2011 at 11:31 AM, Martin Juhl <mj@xxxxxxxxxxxx> wrote:
>>>
>>>> Sry... Fixed...
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------
>>>> *Fra: *"Ellington Santos" <ellington@xxxxxxxxxxxxx>
>>>> *Til: *"Martin Juhl" <mj@xxxxxxxxxxxx>
>>>> *Sendt: *torsdag, 5. maj 2011 16:15:14
>>>>
>>>> *Emne: *Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using my
>>>> Nvidia card in my Alienware M11X R2!!!
>>>>
>>>> Martin, my name is Ellington Santos. It isn't Santos Ellington. ;-)
>>>>
>>>> On Thu, May 5, 2011 at 10:54 AM, Martin Juhl <mj@xxxxxxxxxxxx> wrote:
>>>>
>>>>> Great...
>>>>>
>>>>> Thanks for your feedback
>>>>>
>>>>>
>>>>>
>>>>> Med venlig hilsen
>>>>>
>>>>> Martin Juhl
>>>>> IT-konsulent
>>>>> *T:* (+45) 70 20 10 63
>>>>> M: (+45) 27 52 46 58
>>>>> CASALOGIC A/S
>>>>>
>>>>> Besøg os på
>>>>> www.casalogic.dk
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------
>>>>> *Fra: *"Ellington Santos" <ellington@xxxxxxxxxxxxx>
>>>>> *Til: *"Martin Juhl" <mj@xxxxxxxxxxxx>
>>>>> *Cc: *"peter" <peter@xxxxxxxxxx>,
>>>>> hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>> *Sendt: *torsdag, 5. maj 2011 02:53:17
>>>>>
>>>>> *Emne: *Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using
>>>>> my Nvidia card in my Alienware M11X R2!!!
>>>>>
>>>>> It worked with Option "ConnectedMonitor" "DFP-0".
>>>>>
>>>>> I attached my xorg.conf and Xorg.0.log. I swaped screen 0 and 1 to use
>>>>> intel as first screen.
>>>>>
>>>>> By the way, my netbook is a Acer EeePC 1215N.
>>>>>
>>>>>
>>>>> On Wed, May 4, 2011 at 6:51 PM, Martin Juhl <mj@xxxxxxxxxxxx> wrote:
>>>>>
>>>>>> If that doesn't work...
>>>>>>
>>>>>> You can try:
>>>>>>
>>>>>> Option "ConnectedMonitor" "CRT"
>>>>>>
>>>>>> or
>>>>>>
>>>>>> Option "UseDisplayDevice" "none"
>>>>>>
>>>>>> instead...
>>>>>>
>>>>>>
>>>>>>
>>>>>> ------------------------------
>>>>>> *Fra: *"Martin Juhl" <mj@xxxxxxxxxxxx>
>>>>>> *Til: *"Ellington Santos" <ellington@xxxxxxxxxxxxx>, "peter" <
>>>>>> peter@xxxxxxxxxx>
>>>>>>
>>>>>> *Cc: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>> *Sendt: *onsdag, 4. maj 2011 23:49:03
>>>>>>
>>>>>> *Emne: *Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using
>>>>>> my Nvidia card in my Alienware M11X R2!!!
>>>>>>
>>>>>> Hi Santos and Peter..
>>>>>>
>>>>>> I think you guys have the same problem..
>>>>>>
>>>>>> Could you try the following:
>>>>>>
>>>>>> Add:
>>>>>>
>>>>>> Option "ConnectedMonitor" "CRT-0"
>>>>>>
>>>>>> to your nvidia device:
>>>>>>
>>>>>> Section "Device"
>>>>>> Identifier "Device1"
>>>>>> Driver "nvidia"
>>>>>> VendorName "NVIDIA Corporation"
>>>>>> BusID "PCI:1:0:0"
>>>>>> Option "IgnoreEDID"
>>>>>> Option "ConnectedMonitor" "CRT-0"
>>>>>> #Screen 0
>>>>>> EndSection
>>>>>>
>>>>>> Santos: You might need to change your BusID as well to BusID
>>>>>> "PCI:1:0:0"...
>>>>>>
>>>>>> Please report back...
>>>>>>
>>>>>> ------------------------------
>>>>>> *Fra: *"Ellington Santos" <ellington@xxxxxxxxxxxxx>
>>>>>> *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>> *Sendt: *onsdag, 4. maj 2011 23:31:14
>>>>>> *Emne: *Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using
>>>>>> my Nvidia card in my Alienware M11X R2!!!
>>>>>>
>>>>>> I've got the same error.
>>>>>>
>>>>>> Look Xorg.0.log lines referent to nvidia:
>>>>>>
>>>>>> [ 35340.269] (II) Module glx: vendor="NVIDIA Corporation"
>>>>>> [ 35340.269] (II) NVIDIA GLX Module 260.19.29 Wed Dec 8 12:25:40
>>>>>> PST 2010
>>>>>> [ 35340.272] (II) LoadModule: "nvidia"
>>>>>> [ 35340.273] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
>>>>>> [ 35340.273] (II) Module nvidia: vendor="NVIDIA Corporation"
>>>>>> [ 35340.276] (II) NVIDIA dlloader X Driver 260.19.29 Wed Dec 8
>>>>>> 12:10:28 PST 2010
>>>>>> [ 35340.276] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
>>>>>> [ 35340.298] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
>>>>>> [ 35340.298] (==) NVIDIA(0): RGB weight 888
>>>>>> [ 35340.298] (==) NVIDIA(0): Default visual is TrueColor
>>>>>> [ 35340.298] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
>>>>>> [ 35340.298] (**) NVIDIA(0): Enabling RENDER acceleration
>>>>>> [ 35340.298] (II) NVIDIA(0): Support for GLX with the Damage and
>>>>>> Composite X extensions is
>>>>>> [ 35340.299] (II) NVIDIA(0): enabled.
>>>>>> [ 35340.579] (II) NVIDIA(0): NVIDIA GPU ION (GT218) at PCI:4:0:0
>>>>>> (GPU-0)
>>>>>> [ 35340.579] (--) NVIDIA(0): Memory: 524288 kBytes
>>>>>> [ 35340.580] (--) NVIDIA(0): VideoBIOS: 70.18.82.00.0b
>>>>>> [ 35340.580] (II) NVIDIA(0): Detected PCI Express Link width: 1X
>>>>>> [ 35340.580] (--) NVIDIA(0): Interlaced video modes are supported on
>>>>>> this GPU
>>>>>> [ 35340.580] (--) NVIDIA(0): Connected display device(s) on ION at
>>>>>> PCI:4:0:0
>>>>>> [ 35340.580] (--) NVIDIA(0): none
>>>>>> [ 35340.581] (EE) NVIDIA(0): No display devices found for this X
>>>>>> screen.
>>>>>> [ 35340.661] (II) UnloadModule: "nvidia"
>>>>>> [ 35340.703] (EE) Failed to initialize GLX extension (Compatible
>>>>>> NVIDIA X driver not found)
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, May 4, 2011 at 5:57 PM, Flat6 <flat6@xxxxxxxxxxxxxx> wrote:
>>>>>>
>>>>>>> Hi all,
>>>>>>>
>>>>>>> After some tests ( i'm quite a nob), I have the same message
>>>>>>>
>>>>>>>
>>>>>>> reports: [VGL] ERROR: Could not open display :0.1.
>>>>>>>
>>>>>>> But I think PCI buses are correctly matched in the Xorg file.....
>>>>>>>
>>>>>>> I tried to launch vglrun glxgears
>>>>>>>
>>>>>>> CU,
>>>>>>>
>>>>>>> Flat6
>>>>>>>
>>>>>>> -------- Message initial --------
>>>>>>> *De*: Peter Liedler <peter@xxxxxxxxxx<Peter%20Liedler%20%3cpeter@xxxxxxxxxx%3e>
>>>>>>> >
>>>>>>> *Reply-to*: peter@xxxxxxxxxx
>>>>>>>
>>>>>>> *À*: Luis Zaldivar <luis.zaldivar@xxxxxxxxx<Luis%20Zaldivar%20%3cluis.zaldivar@xxxxxxxxx%3e>
>>>>>>> >
>>>>>>> *Cc*: hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>>> *Sujet*: Re: [Hybrid-graphics-linux] Optimus Solution found!!!!
>>>>>>> Using my Nvidia card in my Alienware M11X R2!!!
>>>>>>> *Date*: Tue, 3 May 2011 23:07:55 +0200
>>>>>>>
>>>>>>>
>>>>>>> Hi Luis,
>>>>>>>
>>>>>>> I've checked:
>>>>>>>
>>>>>>> lspci | grep VGA
>>>>>>> 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated
>>>>>>> Graphics Controller (rev 18)
>>>>>>> 01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 310M]
>>>>>>> (rev a2)
>>>>>>>
>>>>>>> cat /etc/X11/xorg.conf | grep PCI
>>>>>>> BusID "PCI:1:0:0"
>>>>>>> BusID "PCI:0:2:0"
>>>>>>>
>>>>>>> Section "Device"
>>>>>>> Identifier "Device1"
>>>>>>> Driver "nvidia"
>>>>>>> VendorName "NVIDIA Corporation"
>>>>>>> BusID "PCI:1:0:0"
>>>>>>> Option "IgnoreEDID"
>>>>>>> #Screen 0
>>>>>>> EndSection
>>>>>>>
>>>>>>> Section "Device"
>>>>>>> Identifier "Device0"
>>>>>>> Driver "intel"
>>>>>>> VendorName "onboard"
>>>>>>> BusID "PCI:0:2:0"
>>>>>>> #Screen 1
>>>>>>> EndSection
>>>>>>>
>>>>>>> I even stopped the display manager and reconfigured vgl_config, then rebooted.
>>>>>>> Should work in my opinion. Am I missing something?
>>>>>>> Peter
>>>>>>>
>>>>>>> Am Dienstag, 3. Mai 2011, 22:48:19 schrieb Luis Zaldivar:
>>>>>>> > Peter
>>>>>>> >
>>>>>>> > I had the same issue
>>>>>>> >
>>>>>>> > You must match the PCI buses to the xorg.conf ones
>>>>>>> >
>>>>>>> > run lspci | grep VGA
>>>>>>> >
>>>>>>> > $ lspci | grep VGA
>>>>>>> > 00:02.0 VGA compatible controller: Intel Corporation Core Processor
>>>>>>> > Integrated Graphics Controller (rev 18)
>>>>>>> > 02:00.0 VGA compatible controller: nVidia Corporation Device 0df1 (rev a1)
>>>>>>> >
>>>>>>> > and modify the xorg file with those numbers
>>>>>>> >
>>>>>>> > ~$ fgrep "PCI" /etc/X11/xorg.conf
>>>>>>> > BusID "PCI:2:0:0"
>>>>>>> > BusID "PCI:0:2:0"
>>>>>>> >
>>>>>>> > On 03/05/11 15:38, Peter Liedler wrote:
>>>>>>> > > Hi there,
>>>>>>> > >
>>>>>>> > > after all, this is great news! Thank you for this solution.
>>>>>>> > >
>>>>>>> > > I am running Kubuntu natty 11.04 64bit.
>>>>>>> > > The installation was absolutely smooth and worked as in described in the
>>>>>>> > > HOWTO.
>>>>>>> > > Still, for some reason, the display export does not work here. I appended
>>>>>>> > > the two lines to my /etc/profile and rebooted. System comes up with gui
>>>>>>> > > (kde). But running applications with e.g.
>>>>>>> > > vglrun ./pslaunch
>>>>>>> > >
>>>>>>> > > reports: [VGL] ERROR: Could not open display :0.1.
>>>>>>> > >
>>>>>>> > > What have I missed?
>>>>>>> > >
>>>>>>> > > peter
>>>>>>> > >
>>>>>>> > > Am Dienstag, 3. Mai 2011, 21:36:31 schrieb Martin Juhl:
>>>>>>> > >> Hi..
>>>>>>> > >>
>>>>>>> > >> I haven't found the MUX.. as far as I can tell the M11X doesn't have a
>>>>>>> > >> mux.. this solution actually works the way optimus is meant to work.. by
>>>>>>> > >> using the intel card to disable everything, and only offload though
>>>>>>> > >> stuff to the Nvidia card...
>>>>>>> > >>
>>>>>>> > >> I discovered that the never versions of the nvidia driver allowed me to
>>>>>>> > >> create a virtual screen on the nvidia card.. and worked my way from
>>>>>>> > >> there...
>>>>>>> > >>
>>>>>>> > >> /Martin
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> Fra: "Matthew Chambers"<chambers3000@xxxxxxxxx>
>>>>>>> > >> Til: "Martin Juhl"<mj@xxxxxxxxxxxx>
>>>>>>> > >> Sendt: tirsdag, 3. maj 2011 21:28:44
>>>>>>> > >> Emne: Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using my
>>>>>>> > >> Nvidia card in my Alienware M11X R2!!!
>>>>>>> > >>
>>>>>>> > >> Can you tell me how you identified the card MUX. I am a little confused
>>>>>>> > >> or point to a link. I have a Asus NV61J with the 325M optimus Nvidia
>>>>>>> > >> card. But when I looked into the specs of your machine you also have an
>>>>>>> > >> Optimus "enabled". As a side note I love using linux and was wondering
>>>>>>> > >> if there is anything I should read to be more proficient like you are
>>>>>>> > >> with this kind of stuff.
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> On Tue, May 3, 2011 at 11:42 AM, Martin Juhl< mj@xxxxxxxxxxxx> wrote:
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> Hi all..
>>>>>>> > >>
>>>>>>> > >> I have found a way to use the nvidia card in machines WITHOUT the
>>>>>>> > >> optimus mux...
>>>>>>> > >>
>>>>>>> > >> There are still a few flaws... but in my regard they are few...
>>>>>>> > >>
>>>>>>> > >> First of all I have this running on my Alienware M11X R2, on Ubuntu
>>>>>>> > >> Natty 11.04 64-bit.. And haven't tried it on any other configurations..
>>>>>>> > >> so I hope you can report back, if it works on other laptops (it should)
>>>>>>> > >> and other distributions....
>>>>>>> > >>
>>>>>>> > >> Here it goes:
>>>>>>> > >>
>>>>>>> > >> First of all download the following:
>>>>>>> > >>
>>>>>>> > >> General:
>>>>>>> > >>
>>>>>>> > >> http://www.martin-juhl.dk/optimus/xorg.conf
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> 32-bit deb-based:
>>>>>>> > >>
>>>>>>> > >> http://www.martin-juhl.dk/optimus/turbojpeg_1.11.1_i386.deb
>>>>>>> > >>
>>>>>>> > >> http://www.martin-juhl.dk/optimus/ VirtualGL_2.2.1_i386.deb
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> 64-bit deb-based:
>>>>>>> > >>
>>>>>>> > >> http://www.martin-juhl.dk/optimus/turbojpeg_1.11.1_amd64.deb
>>>>>>> > >>
>>>>>>> > >> http://www.martin-juhl.dk/optimus/VirtualGL_2.2.1_amd64.deb
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> 32-bit rpm-based:
>>>>>>> > >>
>>>>>>> > >> http://www.martin-juhl.dk/optimus/turbojpeg-1.11.i386.rpm
>>>>>>> > >>
>>>>>>> > >> http://www.martin-juhl.dk/optimus/VirtualGL-2.2.1.i386.rpm
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> 64-bit rpm-based:
>>>>>>> > >>
>>>>>>> > >> http://www.martin-juhl.dk/optimus/turbojpeg-1.11.x86_64.rpm
>>>>>>> > >>
>>>>>>> > >> http://www.martin-juhl.dk/optimus/ VirtualGL-2.2.1.x86_64.rpm
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> Source:
>>>>>>> > >>
>>>>>>> > >> http://www.martin-juhl.dk/optimus/turbojpeg-ipp-1.11.1.tar.gz
>>>>>>> > >>
>>>>>>> > >> http://www.martin-juhl.dk/optimus/ VirtualGL-2.2.1.tar.gz
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> Files can also be found here:
>>>>>>> > >>
>>>>>>> > >> http://sourceforge.net/projects/virtualgl/files/
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> Ok... Installation:
>>>>>>> > >>
>>>>>>> > >> Start by installing the nvidia driver:
>>>>>>> > >>
>>>>>>> > >> sudo aptitude install nvidia-current (ubuntu)
>>>>>>> > >>
>>>>>>> > >> then put the xorg.conf in /etc/X11/
>>>>>>> > >>
>>>>>>> > >> after that, install the two files you downloaded above:
>>>>>>> > >>
>>>>>>> > >> sudo dpkg -i turbojpeg* VirtualGL* (deb)
>>>>>>> > >>
>>>>>>> > >> or
>>>>>>> > >>
>>>>>>> > >> sudo rpm -ihv turbojpeg* VirtualGL* (rpm)
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> Now run:
>>>>>>> > >>
>>>>>>> > >> sudo vglserver_config
>>>>>>> > >>
>>>>>>> > >> answer as below:
>>>>>>> > >>
>>>>>>> > >> 1) Configure server for use with VirtualGL in GLX mode
>>>>>>> > >> 2) Unconfigure server for use with VirtualGL in GLX mode
>>>>>>> > >> X) Exit
>>>>>>> > >>
>>>>>>> > >> Choose:
>>>>>>> > >> 1
>>>>>>> > >>
>>>>>>> > >> Restrict 3D X server access to vglusers group (recommended)?
>>>>>>> > >> [Y/n]
>>>>>>> > >> n
>>>>>>> > >>
>>>>>>> > >> Restrict framebuffer device access to vglusers group (recommended)?
>>>>>>> > >> [Y/n]
>>>>>>> > >> n
>>>>>>> > >>
>>>>>>> > >> Disable XTEST extension (recommended)?
>>>>>>> > >> [Y/n]
>>>>>>> > >> y
>>>>>>> > >> ... Creating /etc/modprobe.d/virtualgl.conf to set requested permissions
>>>>>>> > >> for /dev/nvidia* ...
>>>>>>> > >> ... Attempting to remove nvidia module from memory so device permissions
>>>>>>> > >> will be reloaded ...
>>>>>>> > >> ERROR: Module nvidia is in use
>>>>>>> > >> ... Granting write permission to /dev/nvidia0 /dev/nvidiactl for all
>>>>>>> > >> users ... ... Modifying /etc/X11/xorg.conf to enable DRI permissions
>>>>>>> > >> for all users ...
>>>>>>> > >> ... Adding xhost +LOCAL: to /etc/kde4/kdm/Xsetup script ...
>>>>>>> > >> ... Disabling XTEST extension in /etc/kde4/kdm/kdmrc ...
>>>>>>> > >>
>>>>>>> > >> Done. You must restart the display manager for the changes to take
>>>>>>> > >> effect.
>>>>>>> > >>
>>>>>>> > >> IMPORTANT NOTE: Your system uses modprobe.d to set device permissions.
>>>>>>> > >> You must execute rmmod nvidia with the display manager stopped in order
>>>>>>> > >> for the new device permission settings to become effective.
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> 1) Configure server for use with VirtualGL in GLX mode
>>>>>>> > >> 2) Unconfigure server for use with VirtualGL in GLX mode
>>>>>>> > >> X) Exit
>>>>>>> > >>
>>>>>>> > >> Choose:
>>>>>>> > >> x
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> Then:
>>>>>>> > >>
>>>>>>> > >> append the following two lines to /etc/profile
>>>>>>> > >>
>>>>>>> > >> VGL_DISPLAY=:0.1
>>>>>>> > >> export VGL_DISPLAY
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> and reboot...
>>>>>>> > >>
>>>>>>> > >> Hopefully your computer comes back up..
>>>>>>> > >>
>>>>>>> > >> now you should be able to start applications with:
>>>>>>> > >>
>>>>>>> > >> vglrun<application>
>>>>>>> > >>
>>>>>>> > >> and the nvidia card will be used for acceleration..
>>>>>>> > >>
>>>>>>> > >> btw.<application> needs to contain the full path to the application if
>>>>>>> > >> not in the path...
>>>>>>> > >>
>>>>>>> > >> It is still the Intel card running the rest.. and for now I haven't
>>>>>>> > >> found a way to activate acceleration for both cards.. so no fancy
>>>>>>> > >> compiz effects.. but thats no problem for me, as long as I can use my
>>>>>>> > >> nvidia card for gaming :D...
>>>>>>> > >>
>>>>>>> > >> Hope this will help someone..
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> /MrMEEE aka Martin Juhl...
>>>>>>> > >>
>>>>>>> > >> _______________________________________________
>>>>>>> > >> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>>>> > >> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>>> > >> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>>>> > >> More help : https://help.launchpad.net/ListHelp
>>>>>>> > >
>>>>>>> > > _______________________________________________
>>>>>>> > > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>>>> > > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>>> > > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>>>> > > More help : https://help.launchpad.net/ListHelp
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>>>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>>>> More help : https://help.launchpad.net/ListHelp
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>>>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>>>> More help : https://help.launchpad.net/ListHelp
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>>> More help : https://help.launchpad.net/ListHelp
>>>>>>
>>>>>> _______________________________________________
>>>>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>>> More help : https://help.launchpad.net/ListHelp
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>> More help : https://help.launchpad.net/ListHelp
>>>
>>> _______________________________________________
>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>> More help : https://help.launchpad.net/ListHelp
>>>
>>>
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>> More help : https://help.launchpad.net/ListHelp
>>
>>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~hybrid-graphics-linux
> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
> More help : https://help.launchpad.net/ListHelp
>
>
--
Luis Zapata Ortiz
Molecular Biotechnology Engineering
Laboratory of Bioinformatics and Mathematics of the Genome, LBMG.
Center of Mathematical Modeling of the University of Chile.
Av. Blanco Encalada 2120
56-2-9784551
[ 34.678]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 34.678] X Protocol Version 11, Revision 0
[ 34.678] Build Operating System: Linux 2.6.24-29-server x86_64 Ubuntu
[ 34.678] Current Operating System: Linux luisgls-pc 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64
[ 34.678] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=8ca939b5-24f6-4e22-a569-baabef9010be ro quiet splash vt.handoff=7
[ 34.678] Build Date: 19 April 2011 03:40:45PM
[ 34.678] xorg-server 2:1.10.1-1ubuntu1 (For technical support please see http://www.ubuntu.com/support)
[ 34.678] Current version of pixman: 0.20.2
[ 34.678] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 34.678] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 34.678] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 6 15:56:28 2011
[ 34.678] (==) Using config file: "/etc/X11/xorg.conf"
[ 34.678] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 34.678] (==) ServerLayout "Layout0"
[ 34.678] (**) |-->Screen "Screen0" (0)
[ 34.678] (**) | |-->Monitor "Monitor0"
[ 34.679] (**) | |-->Device "Device0"
[ 34.679] (**) |-->Screen "Screen1" (1)
[ 34.679] (**) | |-->Monitor "Monitor0"
[ 34.679] (**) | |-->Device "Device1"
[ 34.679] (**) |-->Input Device "Keyboard0"
[ 34.679] (**) |-->Input Device "Mouse0"
[ 34.679] (==) Automatically adding devices
[ 34.679] (==) Automatically enabling devices
[ 34.679] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 34.679] Entry deleted from font path.
[ 34.679] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 34.679] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 34.679] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 34.679] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 34.679] (WW) Disabling Keyboard0
[ 34.679] (WW) Disabling Mouse0
[ 34.679] (II) Loader magic: 0x7e0280
[ 34.679] (II) Module ABI versions:
[ 34.679] X.Org ANSI C Emulation: 0.4
[ 34.679] X.Org Video Driver: 10.0
[ 34.679] X.Org XInput driver : 12.3
[ 34.679] X.Org Server Extension : 5.0
[ 34.680] (--) PCI:*(0:0:2:0) 8086:0046:1028:044d rev 18, Mem @ 0xfa400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f080/8
[ 34.680] (--) PCI: (0:1:0:0) 10de:0a75:1028:044d rev 162, Mem @ 0xf9000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 34.680] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 34.680] (II) LoadModule: "extmod"
[ 34.719] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 34.719] (II) Module extmod: vendor="X.Org Foundation"
[ 34.719] compiled for 1.10.1, module version = 1.0.0
[ 34.719] Module class: X.Org Server Extension
[ 34.719] ABI class: X.Org Server Extension, version 5.0
[ 34.720] (II) Loading extension MIT-SCREEN-SAVER
[ 34.720] (II) Loading extension XFree86-VidModeExtension
[ 34.720] (II) Loading extension XFree86-DGA
[ 34.720] (II) Loading extension DPMS
[ 34.720] (II) Loading extension XVideo
[ 34.720] (II) Loading extension XVideo-MotionCompensation
[ 34.720] (II) Loading extension X-Resource
[ 34.720] (II) LoadModule: "dbe"
[ 34.720] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 34.720] (II) Module dbe: vendor="X.Org Foundation"
[ 34.720] compiled for 1.10.1, module version = 1.0.0
[ 34.720] Module class: X.Org Server Extension
[ 34.720] ABI class: X.Org Server Extension, version 5.0
[ 34.720] (II) Loading extension DOUBLE-BUFFER
[ 34.720] (II) LoadModule: "glx"
[ 34.720] (II) Loading /usr/lib/xorg/extra-modules/libglx.so
[ 36.360] (II) Module glx: vendor="NVIDIA Corporation"
[ 36.373] compiled for 4.0.2, module version = 1.0.0
[ 36.373] Module class: X.Org Server Extension
[ 36.373] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:10:15 PDT 2011
[ 36.373] (II) Loading extension GLX
[ 36.373] (II) LoadModule: "record"
[ 36.373] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 36.373] (II) Module record: vendor="X.Org Foundation"
[ 36.373] compiled for 1.10.1, module version = 1.13.0
[ 36.373] Module class: X.Org Server Extension
[ 36.373] ABI class: X.Org Server Extension, version 5.0
[ 36.373] (II) Loading extension RECORD
[ 36.373] (II) LoadModule: "dri"
[ 36.374] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 36.374] (II) Module dri: vendor="X.Org Foundation"
[ 36.374] compiled for 1.10.1, module version = 1.0.0
[ 36.374] ABI class: X.Org Server Extension, version 5.0
[ 36.374] (II) Loading extension XFree86-DRI
[ 36.374] (II) LoadModule: "dri2"
[ 36.374] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 36.374] (II) Module dri2: vendor="X.Org Foundation"
[ 36.374] compiled for 1.10.1, module version = 1.2.0
[ 36.374] ABI class: X.Org Server Extension, version 5.0
[ 36.374] (II) Loading extension DRI2
[ 36.374] (II) LoadModule: "intel"
[ 36.388] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 36.388] (II) Module intel: vendor="X.Org Foundation"
[ 36.388] compiled for 1.10.1, module version = 2.14.0
[ 36.388] Module class: X.Org Video Driver
[ 36.388] ABI class: X.Org Video Driver, version 10.0
[ 36.388] (II) LoadModule: "nvidia"
[ 36.388] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[ 36.460] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 36.462] compiled for 4.0.2, module version = 1.0.0
[ 36.462] Module class: X.Org Video Driver
[ 36.498] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 36.499] (II) NVIDIA dlloader X Driver 270.41.06 Mon Apr 18 14:55:25 PDT 2011
[ 36.499] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 36.499] (++) using VT number 7
[ 36.501] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 36.507] (II) Loading sub module "fb"
[ 36.507] (II) LoadModule: "fb"
[ 36.507] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.508] (II) Module fb: vendor="X.Org Foundation"
[ 36.508] compiled for 1.10.1, module version = 1.0.0
[ 36.508] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.508] (II) Loading sub module "wfb"
[ 36.508] (II) LoadModule: "wfb"
[ 36.508] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 36.518] (II) Module wfb: vendor="X.Org Foundation"
[ 36.518] compiled for 1.10.1, module version = 1.0.0
[ 36.518] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.518] (II) Loading sub module "ramdac"
[ 36.518] (II) LoadModule: "ramdac"
[ 36.518] (II) Module "ramdac" already built-in
[ 36.530] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[ 36.530] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 36.530] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.601] drmOpenDevice: node name is /dev/dri/card0
[ 36.601] drmOpenDevice: open result is 8, (OK)
[ 36.601] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 36.601] drmOpenDevice: node name is /dev/dri/card0
[ 36.601] drmOpenDevice: open result is 8, (OK)
[ 36.601] drmOpenByBusid: drmOpenMinor returns 8
[ 36.601] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 36.601] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 36.601] (==) intel(0): RGB weight 888
[ 36.601] (==) intel(0): Default visual is TrueColor
[ 36.602] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 36.602] (--) intel(0): Chipset: "Arrandale"
[ 36.602] (**) intel(0): Relaxed fencing enabled
[ 36.602] (**) intel(0): Tiling enabled
[ 36.602] (**) intel(0): SwapBuffers wait enabled
[ 36.602] (==) intel(0): video overlay key set to 0x101fe
[ 36.602] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 36.602] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 36.663] (II) intel(0): Output VGA1 has no monitor section
[ 36.667] (II) intel(0): Output HDMI1 has no monitor section
[ 36.668] (II) intel(0): Output DP1 has no monitor section
[ 36.668] (II) intel(0): EDID for output LVDS1
[ 36.668] (II) intel(0): Manufacturer: AUO Model: 243c Serial#: 0
[ 36.668] (II) intel(0): Year: 2009 Week: 0
[ 36.668] (II) intel(0): EDID Version: 1.4
[ 36.668] (II) intel(0): Digital Display Input
[ 36.668] (II) intel(0): 6 bits per channel
[ 36.668] (II) intel(0): Digital interface is undefined
[ 36.668] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 36.668] (II) intel(0): Gamma: 2.20
[ 36.668] (II) intel(0): No DPMS capabilities specified
[ 36.668] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 36.668] (II) intel(0): First detailed timing is preferred mode
[ 36.668] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 36.668] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 36.668] (II) intel(0): blueX: 0.150 blueY: 0.600 whiteX: 0.313 whiteY: 0.329
[ 36.668] (II) intel(0): Manufacturer's mask: 0
[ 36.668] (II) intel(0): Supported detailed timing:
[ 36.668] (II) intel(0): clock: 69.3 MHz Image Size: 309 x 173 mm
[ 36.668] (II) intel(0): h_active: 1366 h_sync: 1404 h_sync_end 1426 h_blank_end 1436 h_border: 0
[ 36.668] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 36.668] (II) intel(0): Supported detailed timing:
[ 36.668] (II) intel(0): clock: 69.3 MHz Image Size: 309 x 173 mm
[ 36.668] (II) intel(0): h_active: 1366 h_sync: 1404 h_sync_end 1426 h_blank_end 1436 h_border: 0
[ 36.669] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 36.669] (II) intel(0): H3D38€B140XW2
[ 36.669] (II) intel(0): Unknown vendor-specific block 0
[ 36.669] (II) intel(0): EDID (in hex):
[ 36.669] (II) intel(0): 00ffffffffffff0006af3c2400000000
[ 36.669] (II) intel(0): 00130104901f117802c8a59e57549226
[ 36.669] (II) intel(0): 99505400000001010101010101010101
[ 36.669] (II) intel(0): 010101010101121b5646500023302616
[ 36.669] (II) intel(0): 360035ad1000001a121b564650002330
[ 36.669] (II) intel(0): 2616360035ad1000001a000000fe0048
[ 36.669] (II) intel(0): 33443338804231343058573200000000
[ 36.669] (II) intel(0): 00004101960001000001010a2020008b
[ 36.669] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 36.669] (II) intel(0): Printing DDC gathered Modelines:
[ 36.669] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 36.669] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 36.669] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 36.669] (II) intel(0): Printing probed modes for output LVDS1
[ 36.669] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 36.669] (II) intel(0): Modeline "1366x768"x60.1 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 36.669] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 36.669] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 36.669] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 36.669] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 36.669] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 36.730] (II) intel(0): EDID for output VGA1
[ 36.730] (II) intel(0): Manufacturer: VSC Model: 6911 Serial#: 16843009
[ 36.730] (II) intel(0): Year: 2005 Week: 13
[ 36.730] (II) intel(0): EDID Version: 1.3
[ 36.730] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 36.730] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 36.730] (II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 31
[ 36.730] (II) intel(0): Gamma: 2.20
[ 36.730] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 36.730] (II) intel(0): Default color space is primary color space
[ 36.730] (II) intel(0): First detailed timing is preferred mode
[ 36.730] (II) intel(0): redX: 0.638 redY: 0.342 greenX: 0.293 greenY: 0.609
[ 36.730] (II) intel(0): blueX: 0.147 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 36.730] (II) intel(0): Supported established timings:
[ 36.730] (II) intel(0): 720x400@70Hz
[ 36.730] (II) intel(0): 640x480@60Hz
[ 36.730] (II) intel(0): 640x480@67Hz
[ 36.730] (II) intel(0): 640x480@72Hz
[ 36.730] (II) intel(0): 640x480@75Hz
[ 36.730] (II) intel(0): 800x600@56Hz
[ 36.730] (II) intel(0): 800x600@60Hz
[ 36.730] (II) intel(0): 800x600@72Hz
[ 36.730] (II) intel(0): 800x600@75Hz
[ 36.730] (II) intel(0): 832x624@75Hz
[ 36.730] (II) intel(0): 1024x768@60Hz
[ 36.730] (II) intel(0): 1024x768@70Hz
[ 36.730] (II) intel(0): 1024x768@75Hz
[ 36.730] (II) intel(0): 1280x1024@75Hz
[ 36.730] (II) intel(0): 1152x864@75Hz
[ 36.730] (II) intel(0): Manufacturer's mask: 0
[ 36.730] (II) intel(0): Supported standard timings:
[ 36.730] (II) intel(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 36.730] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 36.730] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 36.730] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 36.730] (II) intel(0): #4: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 36.730] (II) intel(0): #5: hsize: 800 vsize 600 refresh: 85 vid: 22853
[ 36.730] (II) intel(0): #6: hsize: 640 vsize 480 refresh: 85 vid: 22833
[ 36.730] (II) intel(0): Supported detailed timing:
[ 36.730] (II) intel(0): clock: 162.0 MHz Image Size: 408 x 306 mm
[ 36.730] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
[ 36.730] (II) intel(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
[ 36.730] (II) intel(0): Serial No: A210513L0702
[ 36.730] (II) intel(0): Ranges: V min: 50 V max: 85 Hz, H min: 30 H max: 92 kHz, PixClock max 175 MHz
[ 36.730] (II) intel(0): Monitor name: VP201b
[ 36.730] (II) intel(0): EDID (in hex):
[ 36.730] (II) intel(0): 00ffffffffffff005a63116901010101
[ 36.730] (II) intel(0): 0d0f01030e291f782e60e5a3574b9c25
[ 36.730] (II) intel(0): 115054bfef80a94081808140714f6159
[ 36.730] (II) intel(0): 455931590101483f403062b0324040c0
[ 36.730] (II) intel(0): 130098321100001e000000ff00413231
[ 36.730] (II) intel(0): 303531334c303730320a000000fd0032
[ 36.730] (II) intel(0): 551e5c11000a202020202020000000fc
[ 36.730] (II) intel(0): 005650323031620a20202020202000e6
[ 36.730] (II) intel(0): Printing probed modes for output VGA1
[ 36.730] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 36.730] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 36.730] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 36.730] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 36.730] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 36.730] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 36.730] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 36.730] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 36.730] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 36.730] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 36.730] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 36.730] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 36.730] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 36.730] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 36.730] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 36.731] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 36.731] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 36.731] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 36.731] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 36.731] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 36.731] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 36.735] (II) intel(0): EDID for output HDMI1
[ 36.736] (II) intel(0): EDID for output DP1
[ 36.736] (II) intel(0): Output LVDS1 connected
[ 36.736] (II) intel(0): Output VGA1 connected
[ 36.736] (II) intel(0): Output HDMI1 disconnected
[ 36.736] (II) intel(0): Output DP1 disconnected
[ 36.736] (II) intel(0): Using user preference for initial modes
[ 36.736] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 36.736] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 36.736] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 36.736] (II) intel(0): Kernel page flipping support detected, enabling
[ 36.736] (**) intel(0): Display dimensions: (310, 170) mm
[ 36.736] (**) intel(0): DPI set to (83, 114)
[ 36.736] (II) Loading sub module "fb"
[ 36.736] (II) LoadModule: "fb"
[ 36.736] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.736] (II) Module fb: vendor="X.Org Foundation"
[ 36.737] compiled for 1.10.1, module version = 1.0.0
[ 36.737] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.739] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 36.739] (==) NVIDIA(1): RGB weight 888
[ 36.739] (==) NVIDIA(1): Default visual is TrueColor
[ 36.739] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 36.739] (**) NVIDIA(1): Option "ConnectedMonitor" "DFP-0"
[ 36.739] (**) NVIDIA(1): ConnectedMonitor string: "DFP-0"
[ 38.024] (WW) NVIDIA(GPU-0): Unable to read EDID for display device DFP-0
[ 38.037] (II) NVIDIA(1): NVIDIA GPU GeForce 310M (GT218) at PCI:1:0:0 (GPU-0)
[ 38.037] (--) NVIDIA(1): Memory: 524288 kBytes
[ 38.037] (--) NVIDIA(1): VideoBIOS: 70.18.49.00.1a
[ 38.037] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 38.037] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
[ 38.037] (--) NVIDIA(1): Connected display device(s) on GeForce 310M at PCI:1:0:0
[ 38.037] (--) NVIDIA(1): DFP-0
[ 38.037] (--) NVIDIA(1): DFP-0: 330.0 MHz maximum pixel clock
[ 38.037] (--) NVIDIA(1): DFP-0: Internal Single Link LVDS
[ 38.056] (II) NVIDIA(1): Assigned Display Device: DFP-0
[ 38.057] (==) NVIDIA(1):
[ 38.057] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
[ 38.057] (==) NVIDIA(1): will be used as the requested mode.
[ 38.057] (==) NVIDIA(1):
[ 38.057] (II) NVIDIA(1): Validated modes:
[ 38.057] (II) NVIDIA(1): "nvidia-auto-select"
[ 38.057] (II) NVIDIA(1): Virtual screen size determined to be 640 x 480
[ 38.059] (WW) NVIDIA(1): Unable to get display device DFP-0's EDID; cannot compute DPI
[ 38.059] (WW) NVIDIA(1): from DFP-0's EDID.
[ 38.059] (==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
[ 38.059] (--) Depth 24 pixmap format is 32 bpp
[ 38.059] (==) intel(0): VideoRam: 262144 KB
[ 38.059] (II) intel(0): [DRI2] Setup complete
[ 38.059] (II) intel(0): [DRI2] DRI driver: i965
[ 38.059] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 38.066] (II) UXA(0): Driver registered support for the following operations:
[ 38.066] (II) solid
[ 38.066] (II) copy
[ 38.066] (II) composite (RENDER acceleration)
[ 38.066] (II) put_image
[ 38.066] (II) get_image
[ 38.066] (==) intel(0): Backing store disabled
[ 38.066] (==) intel(0): Silken mouse enabled
[ 38.066] (II) intel(0): Initializing HW Cursor
[ 38.392] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 38.392] (**) intel(0): DPMS enabled
[ 38.392] (==) intel(0): Intel XvMC decoder enabled
[ 38.392] (II) intel(0): Set up textured video
[ 38.392] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 38.392] (II) intel(0): direct rendering: DRI2 Enabled
[ 38.392] (==) intel(0): hotplug detection: "enabled"
[ 38.392] (--) RandR disabled
[ 38.392] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 38.399] (II) NVIDIA(1): Setting mode "nvidia-auto-select"
[ 38.684] (II) NVIDIA(1): Built-in logo is bigger than the screen.
[ 38.685] (II) Loading extension NV-GLX
[ 38.722] (==) NVIDIA(1): Disabling shared memory pixmaps
[ 38.722] (==) NVIDIA(1): Backing store disabled
[ 38.722] (==) NVIDIA(1): Silken mouse enabled
[ 38.722] (**) NVIDIA(1): DPMS enabled
[ 38.722] (II) Loading extension NV-CONTROL
[ 38.722] (WW) NVIDIA(1): Option "IgnoreEDID" is not used
[ 38.722] (II) Loading sub module "dri2"
[ 38.722] (II) LoadModule: "dri2"
[ 38.722] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 38.723] (II) Module dri2: vendor="X.Org Foundation"
[ 38.723] compiled for 1.10.1, module version = 1.2.0
[ 38.723] ABI class: X.Org Server Extension, version 5.0
[ 38.723] (II) NVIDIA(1): [DRI2] Setup complete
[ 38.723] (--) RandR disabled
[ 38.723] (II) Initializing built-in extension Generic Event Extension
[ 38.723] (II) Initializing built-in extension SHAPE
[ 38.723] (II) Initializing built-in extension MIT-SHM
[ 38.723] (II) Initializing built-in extension XInputExtension
[ 38.723] (II) Initializing built-in extension XTEST
[ 38.723] (II) Initializing built-in extension BIG-REQUESTS
[ 38.723] (II) Initializing built-in extension SYNC
[ 38.723] (II) Initializing built-in extension XKEYBOARD
[ 38.723] (II) Initializing built-in extension XC-MISC
[ 38.723] (II) Initializing built-in extension SECURITY
[ 38.723] (II) Initializing built-in extension XINERAMA
[ 38.723] (II) Initializing built-in extension XFIXES
[ 38.723] (II) Initializing built-in extension RENDER
[ 38.723] (II) Initializing built-in extension RANDR
[ 38.723] (II) Initializing built-in extension COMPOSITE
[ 38.723] (II) Initializing built-in extension DAMAGE
[ 38.723] (II) Initializing built-in extension GESTURE
[ 38.724] (II) Initializing extension GLX
[ 38.727] (II) intel(0): Setting screen physical size to 270 x 203
[ 38.842] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 38.848] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 38.848] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.848] (II) LoadModule: "evdev"
[ 38.849] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.849] (II) Module evdev: vendor="X.Org Foundation"
[ 38.849] compiled for 1.10.0.902, module version = 2.6.0
[ 38.849] Module class: X.Org XInput Driver
[ 38.849] ABI class: X.Org XInput driver, version 12.3
[ 38.849] (II) Using input driver 'evdev' for 'Power Button'
[ 38.849] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.849] (**) Power Button: always reports core events
[ 38.849] (**) Power Button: Device: "/dev/input/event3"
[ 38.849] (--) Power Button: Found keys
[ 38.849] (II) Power Button: Configuring as keyboard
[ 38.849] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 38.849] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 38.849] (**) Option "xkb_rules" "evdev"
[ 38.849] (**) Option "xkb_model" "pc105"
[ 38.849] (**) Option "xkb_layout" "us"
[ 38.849] (**) Option "xkb_variant" "altgr-intl"
[ 38.849] (**) Option "xkb_options" "lv3:ralt_switch"
[ 38.851] (II) XKB: reuse xkmfile /var/lib/xkb/server-D7AF3B6ECB69742DFEC8B5A42710D7CDD073118F.xkm
[ 38.852] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 38.852] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 38.852] (II) Using input driver 'evdev' for 'Video Bus'
[ 38.852] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.852] (**) Video Bus: always reports core events
[ 38.852] (**) Video Bus: Device: "/dev/input/event11"
[ 38.852] (--) Video Bus: Found keys
[ 38.852] (II) Video Bus: Configuring as keyboard
[ 38.852] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12/event11"
[ 38.852] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 38.852] (**) Option "xkb_rules" "evdev"
[ 38.852] (**) Option "xkb_model" "pc105"
[ 38.852] (**) Option "xkb_layout" "us"
[ 38.852] (**) Option "xkb_variant" "altgr-intl"
[ 38.852] (**) Option "xkb_options" "lv3:ralt_switch"
[ 38.853] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 38.853] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 38.853] (II) Using input driver 'evdev' for 'Video Bus'
[ 38.853] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.853] (**) Video Bus: always reports core events
[ 38.853] (**) Video Bus: Device: "/dev/input/event10"
[ 38.853] (--) Video Bus: Found keys
[ 38.853] (II) Video Bus: Configuring as keyboard
[ 38.853] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input11/event10"
[ 38.853] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 38.853] (**) Option "xkb_rules" "evdev"
[ 38.853] (**) Option "xkb_model" "pc105"
[ 38.853] (**) Option "xkb_layout" "us"
[ 38.853] (**) Option "xkb_variant" "altgr-intl"
[ 38.853] (**) Option "xkb_options" "lv3:ralt_switch"
[ 38.858] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 38.858] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.858] (II) Using input driver 'evdev' for 'Power Button'
[ 38.858] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.858] (**) Power Button: always reports core events
[ 38.858] (**) Power Button: Device: "/dev/input/event0"
[ 38.860] (--) Power Button: Found keys
[ 38.860] (II) Power Button: Configuring as keyboard
[ 38.860] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 38.860] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 38.860] (**) Option "xkb_rules" "evdev"
[ 38.860] (**) Option "xkb_model" "pc105"
[ 38.860] (**) Option "xkb_layout" "us"
[ 38.860] (**) Option "xkb_variant" "altgr-intl"
[ 38.860] (**) Option "xkb_options" "lv3:ralt_switch"
[ 38.860] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 38.860] (II) No input driver/identifier specified (ignoring)
[ 38.860] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 38.860] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 38.860] (II) Using input driver 'evdev' for 'Sleep Button'
[ 38.860] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.860] (**) Sleep Button: always reports core events
[ 38.860] (**) Sleep Button: Device: "/dev/input/event2"
[ 38.860] (--) Sleep Button: Found keys
[ 38.860] (II) Sleep Button: Configuring as keyboard
[ 38.860] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 38.860] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 38.860] (**) Option "xkb_rules" "evdev"
[ 38.861] (**) Option "xkb_model" "pc105"
[ 38.861] (**) Option "xkb_layout" "us"
[ 38.861] (**) Option "xkb_variant" "altgr-intl"
[ 38.861] (**) Option "xkb_options" "lv3:ralt_switch"
[ 38.863] (II) config/udev: Adding input device HID 413c:8161 (/dev/input/event5)
[ 38.863] (**) HID 413c:8161: Applying InputClass "evdev keyboard catchall"
[ 38.863] (II) Using input driver 'evdev' for 'HID 413c:8161'
[ 38.863] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.863] (**) HID 413c:8161: always reports core events
[ 38.863] (**) HID 413c:8161: Device: "/dev/input/event5"
[ 38.863] (--) HID 413c:8161: Found keys
[ 38.863] (II) HID 413c:8161: Configuring as keyboard
[ 38.863] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input5/event5"
[ 38.863] (II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD)
[ 38.863] (**) Option "xkb_rules" "evdev"
[ 38.863] (**) Option "xkb_model" "pc105"
[ 38.863] (**) Option "xkb_layout" "us"
[ 38.863] (**) Option "xkb_variant" "altgr-intl"
[ 38.863] (**) Option "xkb_options" "lv3:ralt_switch"
[ 38.864] (II) config/udev: Adding input device HDA Intel Mic at Ext Front Jack (/dev/input/event12)
[ 38.864] (II) No input driver/identifier specified (ignoring)
[ 38.865] (II) config/udev: Adding input device HDA Intel HP Out at Ext Front Jack (/dev/input/event13)
[ 38.865] (II) No input driver/identifier specified (ignoring)
[ 38.866] (II) config/udev: Adding input device HID 04d9:0499 (/dev/input/event7)
[ 38.866] (**) HID 04d9:0499: Applying InputClass "evdev pointer catchall"
[ 38.866] (II) Using input driver 'evdev' for 'HID 04d9:0499'
[ 38.866] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.866] (**) HID 04d9:0499: always reports core events
[ 38.866] (**) HID 04d9:0499: Device: "/dev/input/event7"
[ 38.940] (--) HID 04d9:0499: Found 3 mouse buttons
[ 38.940] (--) HID 04d9:0499: Found scroll wheel(s)
[ 38.940] (--) HID 04d9:0499: Found relative axes
[ 38.940] (--) HID 04d9:0499: Found x and y relative axes
[ 38.940] (II) HID 04d9:0499: Configuring as mouse
[ 38.940] (II) HID 04d9:0499: Adding scrollwheel support
[ 38.940] (**) HID 04d9:0499: YAxisMapping: buttons 4 and 5
[ 38.940] (**) HID 04d9:0499: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 38.940] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input7/event7"
[ 38.940] (II) XINPUT: Adding extended input device "HID 04d9:0499" (type: MOUSE)
[ 38.940] (II) HID 04d9:0499: initialized for relative axes.
[ 38.940] (**) HID 04d9:0499: (accel) keeping acceleration scheme 1
[ 38.940] (**) HID 04d9:0499: (accel) acceleration profile 0
[ 38.940] (**) HID 04d9:0499: (accel) acceleration factor: 2.000
[ 38.940] (**) HID 04d9:0499: (accel) acceleration threshold: 4
[ 38.940] (II) config/udev: Adding input device HID 04d9:0499 (/dev/input/mouse1)
[ 38.940] (II) No input driver/identifier specified (ignoring)
[ 38.941] (II) config/udev: Adding input device Mitsumi Electric Apple Extended USB Keyboard (/dev/input/event8)
[ 38.941] (**) Mitsumi Electric Apple Extended USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 38.941] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple Extended USB Keyboard'
[ 38.941] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.941] (**) Mitsumi Electric Apple Extended USB Keyboard: always reports core events
[ 38.941] (**) Mitsumi Electric Apple Extended USB Keyboard: Device: "/dev/input/event8"
[ 38.941] (--) Mitsumi Electric Apple Extended USB Keyboard: Found keys
[ 38.941] (II) Mitsumi Electric Apple Extended USB Keyboard: Configuring as keyboard
[ 38.941] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.0/input/input8/event8"
[ 38.941] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple Extended USB Keyboard" (type: KEYBOARD)
[ 38.941] (**) Option "xkb_rules" "evdev"
[ 38.941] (**) Option "xkb_model" "pc105"
[ 38.941] (**) Option "xkb_layout" "us"
[ 38.941] (**) Option "xkb_variant" "altgr-intl"
[ 38.941] (**) Option "xkb_options" "lv3:ralt_switch"
[ 38.941] (II) config/udev: Adding input device Mitsumi Electric Apple Extended USB Keyboard (/dev/input/event9)
[ 38.941] (**) Mitsumi Electric Apple Extended USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 38.941] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple Extended USB Keyboard'
[ 38.941] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.941] (**) Mitsumi Electric Apple Extended USB Keyboard: always reports core events
[ 38.941] (**) Mitsumi Electric Apple Extended USB Keyboard: Device: "/dev/input/event9"
[ 38.950] (--) Mitsumi Electric Apple Extended USB Keyboard: Found keys
[ 38.950] (II) Mitsumi Electric Apple Extended USB Keyboard: Configuring as keyboard
[ 38.950] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.1/input/input9/event9"
[ 38.950] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple Extended USB Keyboard" (type: KEYBOARD)
[ 38.950] (**) Option "xkb_rules" "evdev"
[ 38.950] (**) Option "xkb_model" "pc105"
[ 38.950] (**) Option "xkb_layout" "us"
[ 38.950] (**) Option "xkb_variant" "altgr-intl"
[ 38.950] (**) Option "xkb_options" "lv3:ralt_switch"
[ 38.953] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 38.953] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 38.953] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 38.953] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.953] (**) AT Translated Set 2 keyboard: always reports core events
[ 38.953] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 38.953] (--) AT Translated Set 2 keyboard: Found keys
[ 38.953] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 38.953] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 38.953] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 38.953] (**) Option "xkb_rules" "evdev"
[ 38.953] (**) Option "xkb_model" "pc105"
[ 38.953] (**) Option "xkb_layout" "us"
[ 38.953] (**) Option "xkb_variant" "altgr-intl"
[ 38.953] (**) Option "xkb_options" "lv3:ralt_switch"
[ 38.953] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 38.953] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 38.953] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 38.953] (II) LoadModule: "synaptics"
[ 38.953] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 38.953] (II) Module synaptics: vendor="X.Org Foundation"
[ 38.953] compiled for 1.10.0.902, module version = 1.3.99
[ 38.953] Module class: X.Org XInput Driver
[ 38.953] ABI class: X.Org XInput driver, version 12.3
[ 38.953] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 38.953] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 38.953] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 38.953] (**) Option "Device" "/dev/input/event14"
[ 38.960] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5658
[ 38.960] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4770
[ 38.960] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 38.960] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 38.960] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 38.960] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 38.960] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 38.960] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event14"
[ 38.960] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 38.960] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 38.960] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 38.960] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 38.960] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 38.960] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 38.960] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 38.960] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 38.961] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 38.961] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 38.961] (II) No input driver/identifier specified (ignoring)
[ 38.965] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[ 38.965] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 38.965] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 38.965] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.965] (**) Dell WMI hotkeys: always reports core events
[ 38.965] (**) Dell WMI hotkeys: Device: "/dev/input/event6"
[ 38.965] (--) Dell WMI hotkeys: Found keys
[ 38.965] (II) Dell WMI hotkeys: Configuring as keyboard
[ 38.965] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event6"
[ 38.965] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
[ 38.965] (**) Option "xkb_rules" "evdev"
[ 38.965] (**) Option "xkb_model" "pc105"
[ 38.965] (**) Option "xkb_layout" "us"
[ 38.965] (**) Option "xkb_variant" "altgr-intl"
[ 38.965] (**) Option "xkb_options" "lv3:ralt_switch"
[ 39.193] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 39.193] (II) intel(0): Printing DDC gathered Modelines:
[ 39.193] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 39.260] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 39.260] (II) intel(0): Printing DDC gathered Modelines:
[ 39.260] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 39.367] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 39.367] (II) intel(0): Printing DDC gathered Modelines:
[ 39.367] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 39.436] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 39.436] (II) intel(0): Printing DDC gathered Modelines:
[ 39.436] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 39.503] (II) intel(0): Allocated new frame buffer 2112x768 stride 8704, tiled
[ 741.226] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 741.226] (II) intel(0): Printing DDC gathered Modelines:
[ 741.226] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 741.295] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 741.295] (II) intel(0): Printing DDC gathered Modelines:
[ 741.295] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 741.365] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 741.365] (II) intel(0): Printing DDC gathered Modelines:
[ 741.365] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 741.433] (II) intel(0): Allocated new frame buffer 3008x1200 stride 12288, tiled
[ 746.401] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 746.401] (II) intel(0): Printing DDC gathered Modelines:
[ 746.401] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 747.270] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 747.270] (II) intel(0): Printing DDC gathered Modelines:
[ 747.270] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
References
