kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #125609
[Bug 1422338] Re: I/O errors on mmc partitions
The MMC I/O errors as detailed in the bug description continue to occur
in Vivid. This prevents installation, and also will eventually occur
with any intensive write activity, for example if attempting to copy a
working system to the eMMC with rsync.
Voyo Minipc, wih Atom CPU Z3735F, and Samsung MCGAFB 64GB eMMC
The problem is not present however, in Ubuntu 14.04-2. Can repeatably,
successfuly install Lubuntu in this release with none of the errors or
messages present in Vivid. So the problem has been introduced since
Kernel 3.16.0-30-generic x86_64 #40-14.04.1-Ubuntu.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1422338
Title:
I/O errors on mmc partitions
Status in linux package in Ubuntu:
Incomplete
Bug description:
Running live USB of the latest Vivid daily build on Lenovo Thinkpad 10
with Samsung eMMC MDGAGC 116 GiB:
Ubuntu 15.04 (vivid-desktop-amd64.iso 2015-02-16 8:05)
Linux 3.18.0-13-generic
systemd 218-10ubuntu1
Extract of dmesg (full log in attachment):
[ 12.337332] mmc0: BKOPS_EN bit is not set
[ 12.348788] mmc0: new HS200 MMC card at address 0001
...
[ 12.369112] mmcblk0: mmc0:0001 MDGAGC 116 GiB
[ 12.369786] mmcblk0boot0: mmc0:0001 MDGAGC partition 1 4.00 MiB
[ 12.370414] mmcblk0boot1: mmc0:0001 MDGAGC partition 2 4.00 MiB
[ 12.370976] mmcblk0rpmb: mmc0:0001 MDGAGC partition 3 4.00 MiB
[ 12.376682] mmcblk0: p1 p2 p3 p4
I get multiple errors when trying to access to mmc partitions:
[ 21.950514] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock
[ 21.950537] mmc0: Got data interrupt 0x00600000 even though no data operation was in progress.
[ 21.952904] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 21.955002] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x400900
[ 21.955007] mmcblk0: error -84 transferring data, sector 244277120, nr 8, cmd response 0x900, card status 0x0
[ 21.955011] mmcblk0: retrying using single block read
...
[ 22.197516] mmcblk0boot0: error -84 transferring data, sector 8071, nr 1, cmd response 0x900, card status 0x0
[ 22.199814] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 22.201911] mmcblk0boot1: error -110 sending stop command, original cmd response 0x900, card status 0x400900
[ 22.201914] mmcblk0boot1: error -84 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0x0
[ 22.201917] mmcblk0boot1: retrying using single block read
...
[ 22.241280] Buffer I/O error on dev mmcblk0boot0, logical block 1008, async page read
[ 22.244301] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 22.246331] mmcblk0boot1: error -110 sending stop command, original cmd response 0x900, card status 0x400900
[ 22.246335] mmcblk0boot1: error -84 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0x0
[ 22.246337] mmcblk0boot1: retrying using single block read
[ 22.248553] mmcblk0boot1: error -84 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0x0
...
[ 22.265044] Buffer I/O error on dev mmcblk0boot1, logical block 1008, async page read
Ubiquity reports "Input/output errors" consequently, I'm unable to
install Ubuntu on mmcblk0 device.
Content of /sys/block/mmcblk0:
alignment_offset
bdi
capability
dev
device
discard_alignment
ext_range
force_ro
holders
inflight
mmcblk0boot0
mmcblk0boot1
mmcblk0p1
mmcblk0p2
mmcblk0p3
mmcblk0p4
mmcblk0rpmb
power
queue
range
removable
ro
size
slaves
stat
subsystem
trace
uevent
I don't know if it's related, but I also get a warning from libparted:
sudo parted -l
Warning: The driver descriptor says the physical block size is 2048 bytes, but
Linux says it is 512 bytes.
Ignore/Cancel? i
Error: /dev/mmcblk0rpmb: unrecognised disk label
Model: Generic SD/MMC Storage Card (sd/mmc)
Disk /dev/mmcblk0rpmb: 4194kB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
Error: /dev/mmcblk0boot0: unrecognised disk label
Model: Generic SD/MMC Storage Card (sd/mmc)
Disk /dev/mmcblk0boot0: 4194kB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
Error: /dev/mmcblk0boot1: unrecognised disk label
Model: Generic SD/MMC Storage Card (sd/mmc)
Disk /dev/mmcblk0boot1: 4194kB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
Model: MMC MDGAGC (sd/mmc)
Disk /dev/mmcblk0: 125GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 274MB 273MB fat32 EFI system partition boot, esp
2 274MB 408MB 134MB Microsoft reserved partition msftres
3 408MB 113GB 113GB ntfs Basic data partition msftdata
4 113GB 125GB 12.1GB ntfs Basic data partition hidden, diag
Let me know if you need additional information.
---
ApportVersion: 2.16.1-0ubuntu2
Architecture: amd64
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
CasperVersion: 1.351
CurrentDesktop: Unity
DistroRelease: Ubuntu 15.04
IwConfig:
usb0 no wireless extensions.
lo no wireless extensions.
LiveMediaBuild: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20150216)
MachineType: LENOVO 20C1CTO1WW
Package: linux (not installed)
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
XDG_RUNTIME_DIR=<set>
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper quiet splash --
ProcVersionSignature: Ubuntu 3.18.0-13.14-generic 3.18.5
RelatedPackageVersions:
linux-restricted-modules-3.18.0-13-generic N/A
linux-backports-modules-3.18.0-13-generic N/A
linux-firmware 1.141
RfKill:
0: LNV4752:00: GPS
Soft blocked: no
Hard blocked: no
Tags: vivid
Uname: Linux 3.18.0-13-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 10/17/2014
dmi.bios.vendor: LENOVO
dmi.bios.version: GWET25WW (1.25)
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 20C1CTO1WW
dmi.board.vendor: LENOVO
dmi.board.version: SKG18 I
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 11
dmi.chassis.vendor: LENOVO
dmi.chassis.version: 0.1
dmi.modalias: dmi:bvnLENOVO:bvrGWET25WW(1.25):bd10/17/2014:svnLENOVO:pn20C1CTO1WW:pvrThinkPad10:rvnLENOVO:rn20C1CTO1WW:rvrSKG18I:cvnLENOVO:ct11:cvr0.1:
dmi.product.name: 20C1CTO1WW
dmi.product.version: ThinkPad 10
dmi.sys.vendor: LENOVO
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1422338/+subscriptions