← Back to team overview

kernel-packages team mailing list archive

[Bug 215624] Re: Philips Semiconductors DVB TV Tuner Card Not Working

 

smyrno, it will help immensely if you filed a new report via a terminal:
ubuntu-bug linux

Please feel free to subscribe me to it.

** No longer affects: linux (Ubuntu)

** Project changed: linux => linux (Ubuntu)

** Changed in: linux (Ubuntu)
       Status: Confirmed => Incomplete

** Changed in: linux (Ubuntu)
   Importance: Undecided => Low

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/215624

Title:
  Philips Semiconductors DVB TV Tuner Card Not Working

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  My Medion MD96420 came with this DVB-T Tuner card, which doesn't seem
  to have any drivers either out of the box or from v4l-dbv. As far as I
  can tell, the remote control for it doesn't work either. Here are some
  specs:

  
  lsb_release -rd
  Description:    Ubuntu hardy (development branch)
  Release:        8.04

  uname -a
  Linux ShadyLappyMKII 2.6.24-15-generic #1 SMP Tue Apr 8 00:33:51 UTC 2008 i686 GNU/Linux

  sudo lspci -vvnn  (for the TV Tuner card)
  ...
  06:00.0 Multimedia controller [0480]: Philips Semiconductors Unknown device [1131:7160] (rev 03)
          Subsystem: Creatix Polymedia GmbH Unknown device [16be:0034]
          Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
          Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
          Latency: 0, Cache Line Size: 64 bytes
          Interrupt: pin A routed to IRQ 10
          Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=1M]
          Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable-
                  Address: 0000000000000000  Data: 0000
          Capabilities: [50] Express Endpoint IRQ 0
                  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                  Device: Latency L0s <256ns, L1 <1us
                  Device: AtnBtn- AtnInd- PwrInd-
                  Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                  Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                  Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
                  Link: Latency L0s <4us, L1 <64us
                  Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
                  Link: Speed 2.5Gb/s, Width x1
          Capabilities: [74] Power Management version 2
                  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
                  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
          Capabilities: [80] Vendor Specific Information

  sudo lsusb -v  (for the remote control receiver)
  ...
  Bus 004 Device 002: ID 0bc7:0006 X10 Wireless Technology, Inc.
  Device Descriptor:
    bLength                18
    bDescriptorType         1
    bcdUSB               1.10
    bDeviceClass            0 (Defined at Interface level)
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0         8
    idVendor           0x0bc7 X10 Wireless Technology, Inc.
    idProduct          0x0006
    bcdDevice            1.00
    iManufacturer           1 X10 WTI
    iProduct                2 RF receiver
    iSerial                 0
    bNumConfigurations      1
    Configuration Descriptor:
      bLength                 9
      bDescriptorType         2
      wTotalLength           32
      bNumInterfaces          1
      bConfigurationValue     1
      iConfiguration          0
      bmAttributes         0xa0
        (Bus Powered)
        Remote Wakeup
      MaxPower                2mA
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        0
        bAlternateSetting       0
        bNumEndpoints           2
        bInterfaceClass       255 Vendor Specific Class
        bInterfaceSubClass      0
        bInterfaceProtocol      0
        iInterface              0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x81  EP 1 IN
          bmAttributes            3
            Transfer Type            Interrupt
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0008  1x 8 bytes
          bInterval              10
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x02  EP 2 OUT
          bmAttributes            3
            Transfer Type            Interrupt
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0008  1x 8 bytes
          bInterval              10
  Device Status:     0x0000
    (Bus Powered)
  ...

  
  Complete output from lspci -vvnn and lsusb -v, as well as dmesg output follows.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/215624/+subscriptions