kernel-packages team mailing list archive

[Joseph Salisbury <joseph.salisbury@xxxxxxxxxxxxx>]

Did this issue start happening after an update/upgrade?  Was there a
prior kernel version where you were not having this particular problem?

Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v4.6 kernel[0].

If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.

Once testing of the upstream kernel is complete, please mark this bug as
"Confirmed".


Thanks in advance.

[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.6-rc6-wily/


** Changed in: linux (Ubuntu)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu)
       Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1578141

Title:
  Predictable interface names partially broken with igb driver

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Note: I'm not sure whether this is really a kernel bug or something
  within systemd/udev, please advise how to further debug.

  On a system with two GE ports, instead of getting named eno1 and eno2,
  I am getting eno1 and renameN. Where N starts at 3 and increases by 2
  on every iteration of doing "rmmod igb;modprobe igb". The
  corresponding lines in dmesg look like this:

  [    2.748429] igb 0000:07:00.0: added PHC on eth0
  [    2.748431] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
  [    2.748433] igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:25:90:d7:60:8e
  [    2.748505] igb 0000:07:00.0: eth0: PBA No: 106100-000
  [    2.748506] igb 0000:07:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
  [    2.802555] igb 0000:07:00.1: added PHC on eth1
  [    2.802557] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
  [    2.802559] igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:25:90:d7:60:8f
  [    2.802631] igb 0000:07:00.1: eth1: PBA No: 106100-000
  [    2.802632] igb 0000:07:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
  [    2.803618] igb 0000:07:00.0 eno1: renamed from eth0
  [    2.833208] igb 0000:07:00.1 rename3: renamed from eth1

  What is even worse: Sometimes the naming changes and the second
  interface ends up as eno1 while the first interface is named renameN
  with an even N. The bad thing about this version is that when it
  happens while the installer is running, the installer will setup
  "rename2" as the primary network interface, which works fine for the
  installation itself, but after installation is finished and the first
  boot of the installed system happens, that interface will be gone,
  leaving the system without network connectivity.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.4.0-21-generic 4.4.0-21.37
  ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6
  Uname: Linux 4.4.0-21-generic x86_64
  AlsaDevices:
   total 0
   crw-rw---- 1 root audio 116,  1 May  4 09:48 seq
   crw-rw---- 1 root audio 116, 33 May  4 09:48 timer
  AplayDevices: Error: [Errno 2] No such file or directory: 'aplay'
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord'
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
  Date: Wed May  4 10:00:39 2016
  HibernationDevice: RESUME=/dev/mapper/compute--node37--vg-swap
  IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig'
  Lsusb:
   Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
   Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd Winbond Hermon
   Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: Supermicro X9DRT-HF+
  PciMultimedia:
   
  ProcEnviron:
   LANGUAGE=en_US:
   TERM=screen
   PATH=(custom, no user)
   LANG=en_US
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-21-generic root=/dev/mapper/compute--node37--vg-root ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.4.0-21-generic N/A
   linux-backports-modules-4.4.0-21-generic  N/A
   linux-firmware                            1.157
  RfKill: Error: [Errno 2] No such file or directory: 'rfkill'
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/21/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 3.0c
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: X9DRT-HF+
  dmi.board.vendor: Supermicro
  dmi.board.version: 0123456789
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 17
  dmi.chassis.vendor: Supermicro
  dmi.chassis.version: 0123456789
  dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3.0c:bd05/21/2014:svnSupermicro:pnX9DRT-HF+:pvr0123456789:rvnSupermicro:rnX9DRT-HF+:rvr0123456789:cvnSupermicro:ct17:cvr0123456789:
  dmi.product.name: X9DRT-HF+
  dmi.product.version: 0123456789
  dmi.sys.vendor: Supermicro

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1578141/+subscriptions