kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #176584
[Bug 1578141] Re: Predictable interface names partially broken with igb driver
We have seen the issue only when deploying Xenial, installations running
Precise or Trusty do not seem to be affected.
Running with 4.6.0-040600rc6-generic has shown the same behaviour.
After doing the rmmod/modprobe cycle, I have now found the attached set
of messages in the output of "journalctl -x", so this seems to confirm
my suspicion of some bad interaction between kernel and systemd going
on.
** Attachment added: "Output of "journalctl -x" when doing "rmmod igb;sleep 3;modprobe igb""
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1578141/+attachment/4657073/+files/journal.txt
** Tags added: kernel-bug-exists-upstream
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
** Also affects: systemd (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1578141
Title:
Predictable interface names partially broken with igb driver
Status in linux package in Ubuntu:
Confirmed
Status in systemd package in Ubuntu:
New
Bug description:
Note: I'm not sure whether this is really a kernel bug or something
within systemd/udev, please advise how to further debug.
On a system with two GE ports, instead of getting named eno1 and eno2,
I am getting eno1 and renameN. Where N starts at 3 and increases by 2
on every iteration of doing "rmmod igb;modprobe igb". The
corresponding lines in dmesg look like this:
[ 2.748429] igb 0000:07:00.0: added PHC on eth0
[ 2.748431] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.748433] igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:25:90:d7:60:8e
[ 2.748505] igb 0000:07:00.0: eth0: PBA No: 106100-000
[ 2.748506] igb 0000:07:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 2.802555] igb 0000:07:00.1: added PHC on eth1
[ 2.802557] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 2.802559] igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:25:90:d7:60:8f
[ 2.802631] igb 0000:07:00.1: eth1: PBA No: 106100-000
[ 2.802632] igb 0000:07:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 2.803618] igb 0000:07:00.0 eno1: renamed from eth0
[ 2.833208] igb 0000:07:00.1 rename3: renamed from eth1
What is even worse: Sometimes the naming changes and the second
interface ends up as eno1 while the first interface is named renameN
with an even N. The bad thing about this version is that when it
happens while the installer is running, the installer will setup
"rename2" as the primary network interface, which works fine for the
installation itself, but after installation is finished and the first
boot of the installed system happens, that interface will be gone,
leaving the system without network connectivity.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: linux-image-4.4.0-21-generic 4.4.0-21.37
ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6
Uname: Linux 4.4.0-21-generic x86_64
AlsaDevices:
total 0
crw-rw---- 1 root audio 116, 1 May 4 09:48 seq
crw-rw---- 1 root audio 116, 33 May 4 09:48 timer
AplayDevices: Error: [Errno 2] No such file or directory: 'aplay'
ApportVersion: 2.20.1-0ubuntu2
Architecture: amd64
ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord'
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
Date: Wed May 4 10:00:39 2016
HibernationDevice: RESUME=/dev/mapper/compute--node37--vg-swap
IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig'
Lsusb:
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd Winbond Hermon
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Supermicro X9DRT-HF+
PciMultimedia:
ProcEnviron:
LANGUAGE=en_US:
TERM=screen
PATH=(custom, no user)
LANG=en_US
SHELL=/bin/bash
ProcFB: 0 VESA VGA
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-21-generic root=/dev/mapper/compute--node37--vg-root ro quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-4.4.0-21-generic N/A
linux-backports-modules-4.4.0-21-generic N/A
linux-firmware 1.157
RfKill: Error: [Errno 2] No such file or directory: 'rfkill'
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 05/21/2014
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 3.0c
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: X9DRT-HF+
dmi.board.vendor: Supermicro
dmi.board.version: 0123456789
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 17
dmi.chassis.vendor: Supermicro
dmi.chassis.version: 0123456789
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3.0c:bd05/21/2014:svnSupermicro:pnX9DRT-HF+:pvr0123456789:rvnSupermicro:rnX9DRT-HF+:rvr0123456789:cvnSupermicro:ct17:cvr0123456789:
dmi.product.name: X9DRT-HF+
dmi.product.version: 0123456789
dmi.sys.vendor: Supermicro
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1578141/+subscriptions
References