kernel-packages team mailing list archive

["Janos G. Komaromi" <jankom@xxxxxxxxxxx>]

New information from Janos

I did a diff on kernel configurations between 3.8.0-29 and -31 and found
minimal, non-essential differences. Scanner works on -29 in ubuntu
environment, but does not work on -31 in xubuntu environment. Scanner
also works on different hardware (my Acer laptop) even on -31 xubuntu.

My conclusion is that scanner problem is not related to kernel but to
distribution itself (xubuntu going from 12.04 to 13.04). I suggest to go
back to my initial report where sane finds the scanner, but scanimage
thinks it is busy.

I'm ready to give up on this bug.

xubuntu is a good compliment to my linux experience. I can continue to
play with my old, hacked and mangled FC3 installation where the scanner
works and my color lexmark printer also works. On the other hand,
xubuntu could make my new HP P 1102W printer work that I was unable to
accomplish so far in FC3. But xubuntu cannot make the lexmark printer
and the scanner work. That's OK, I'll use both linux installations,
depending on what I need.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1184165

Title:
  03f0:1205 Scanner does not work: Simple scan gives a device busy error

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  This is a virgin installation of 13.04.

  Scanner is not found - reported by Simple scan. I tried Ask Ubuntu,
  but got no answer.

  I have a parallel installation of 12.xx on the same computer, and
  scanner does work. So what is specific about 13.04?

  I have also an old FC-3 installation and the scanner works, using sane
  with xinetd. I notice that 13.04 does not use xinetd. So how is the
  scanner accessed? Whatever it is, it works on 12.xx and does not on
  13.04.

  In terminal mode:

  sane-find-scanner
     found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1205 [hp scanjet scanner]) at libusb:002:002

  scanimage -L
     [hp5590] hp5590_get_status: USB-in-USB: got non-zero device status (status 12)
     [hp5590] hp5590_init_scanner: scanner reports non-zero status: Device busy

  lsusb
     Bus 002 Device 002: ID 03f0:1205 Hewlett-Packard ScanJet 4500C/5550C
     Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
     Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.8.0-29-generic.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: i386
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu     3396 F.... pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'nForce'/'NVidia nForce with ALC650E at irq 20'
     Mixer name	: 'Realtek ALC650E'
     Components	: 'AC97a:414c4722'
     Controls      : 50
     Simple ctrls  : 33
  CasperVersion: 1.315.1
  DistroRelease: Ubuntu 12.04
  IwConfig:
   lo        no wireless extensions.
   
   eth0      no wireless extensions.
  LiveMediaBuild: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release i386 (20130820.1)
  Lsusb:
   Bus 001 Device 002: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
   Bus 002 Device 002: ID 03f0:1205 Hewlett-Packard ScanJet 4500C/5550C
   Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: System Manufacturer System Name
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-29-generic N/A
   linux-backports-modules-3.8.0-29-generic  N/A
   linux-firmware                            1.79.6
  RfKill:
   
  Tags:  precise running-unity
  Uname: Linux 3.8.0-29-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 07/26/2004
  dmi.bios.vendor: Award Software, Inc.
  dmi.bios.version: ASUS A7N266-VM ACPI BIOS Rev 1008 beta 002
  dmi.board.name: A7N266VM
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: REV 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 7
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: dmi:bvnAwardSoftware,Inc.:bvrASUSA7N266-VMACPIBIOSRev1008beta002:bd07/26/2004:svnSystemManufacturer:pnSystemName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnA7N266VM:rvrREV1.xx:cvnChassisManufacture:ct7:cvrChassisVersion:
  dmi.product.name: System Name
  dmi.product.version: System Version
  dmi.sys.vendor: System Manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1184165/+subscriptions