← Back to team overview

kernel-packages team mailing list archive

[Bug 362533] Re: 1814:0781 Can't connect to Access Point D-Link DWL-2100AP with WPA(2) Personal


[Expired for linux (Ubuntu) because there has been no activity for 60

** Changed in: linux (Ubuntu)
       Status: Incomplete => Expired

You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.

  1814:0781 Can't connect to Access Point D-Link DWL-2100AP with WPA(2)

Status in “linux” package in Ubuntu:

Bug description:
  Can't connect to Access Point D-Link DWL-2100AP WPA(2) Personal with
  RaLink RT2860 (Fujitsu-Siemens Amilo Pi3540):

  04:00.0 Network controller [0280]: RaLink RT2860 [1814:0781]
          Subsystem: Lite-On Communications Inc Device [11ad:6600]
          Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
          Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
          Latency: 0, Cache Line Size: 64 bytes
          Interrupt: pin A routed to IRQ 17
          Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=64K]
          Capabilities: [40] Power Management version 3
                  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
                  Status: D0 PME-Enable- DSel=0 DScale=0 PME+
          Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable-
                  Address: 0000000000000000  Data: 0000
          Capabilities: [70] Express (v1) Endpoint, MSI 00
                  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
                          ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                          RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                          MaxPayload 128 bytes, MaxReadReq 512 bytes
                  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
                  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
                          ClockPM+ Suprise- LLActRep- BwNot-
                  LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
                          ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
          Capabilities: [100] Advanced Error Reporting <?>
          Kernel driver in use: rt2860
          Kernel modules: rt2860sta

  Problem has been fixed after setting on access point (!) Cypher
  algorithm from "Auto" to "AES". Maybe there is errors in communication
  between controller and access point.

  Description:    Ubuntu 9.04
  Release:        9.04

To manage notifications about this bug go to: