kernel-packages team mailing list archive

[Alexander <linuxpirat@xxxxxxxxx>]

Hi,

have same issue

Aug 15 10:28:05 NB-1824 NetworkManager[1107]: <info> (wlan0): bringing up device.
Aug 15 10:28:05 NB-1824 NetworkManager[1107]: <info> WiFi hardware radio set enabled
Aug 15 10:28:05 NB-1824 NetworkManager[1107]: <info> WiFi now enabled by radio killswitch
Aug 15 10:28:05 NB-1824 NetworkManager[1107]: <info> (wlan0): bringing up device.
Aug 15 10:28:05 NB-1824 kernel: [  203.430446] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
Aug 15 10:28:05 NB-1824 kernel: [  203.440375] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
Aug 15 10:28:07 NB-1824 kernel: [  205.052927] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
Aug 15 10:28:09 NB-1824 kernel: [  206.651425] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
Aug 15 10:28:09 NB-1824 kernel: [  206.651439] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
Aug 15 10:28:31 NB-1824 NetworkManager[1107]: <info> WiFi hardware radio set disabled
Aug 15 10:28:31 NB-1824 NetworkManager[1107]: <info> WiFi now disabled by radio killswitch

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1191992

Title:
  Kernel OOP related to rt2800pci

Status in “linux” package in Ubuntu:
  Expired

Bug description:
  When the module is loaded I have bunch of error message in dmesg and system load is about 4 for doing nothing  (can not recall here, readon why)
  rmmod module caused kernel oop

  Start the machine up again and quickly rmmod it, this time is OK but
  when I run apport-bug it oops again. I luckily add the module in black
  list before .

  Third time the module is not loaded and I am OK to file this bug.

  The error message found in syslog is like:

  Jun 18 08:12:19 pureyang kernel: [  158.221814] phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068].
  Jun 18 08:12:19 pureyang kernel: [  158.221819] phy0 -> rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5).
  Jun 18 08:12:20 pureyang kernel: [  159.837349] phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068].
  Jun 18 08:12:22 pureyang wpa_supplicant[2330]: Could not set interface wlan0 flags: Input/output error
  Jun 18 08:12:22 pureyang wpa_supplicant[2330]: nl80211: Could not set interface 'wlan0' UP
  Jun 18 08:12:22 pureyang kernel: [  161.436870] phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068].
  Jun 18 08:12:22 pureyang kernel: [  161.436875] phy0 -> rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5).
  Jun 18 08:12:23 pureyang kernel: [  163.052389] phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068].
  Jun 18 08:12:25 pureyang wpa_supplicant[2330]: Could not set interface wlan0 flags: Input/output error
  Jun 18 08:12:25 pureyang wpa_supplicant[2330]: WEXT: Could not set interface 'wlan0' UP

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-extra-3.8.0-25-generic 3.8.0-25.37
  ProcVersionSignature: Ubuntu 3.8.0-25.37-generic 3.8.13
  Uname: Linux 3.8.0-25-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC1:  steve      3175 F.... pulseaudio
   /dev/snd/controlC0:  steve      3175 F.... pulseaudio
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
  Date: Tue Jun 18 08:29:10 2013
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=UUID=fda9b137-875c-458f-8053-32dfd22f1ff2
  InstallationDate: Installed on 2013-06-17 (0 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  IwConfig:
   eth0      no wireless extensions.
   
   lo        no wireless extensions.
   
   virbr0    no wireless extensions.
  MachineType: Hewlett-Packard p6-2306a
  MarkForUpload: True
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-25-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-25-generic N/A
   linux-backports-modules-3.8.0-25-generic  N/A
   linux-firmware                            1.106
  RfKill:
   
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/29/2012
  dmi.bios.vendor: AMI
  dmi.bios.version: 8.07
  dmi.board.name: 2ABF
  dmi.board.vendor: Foxconn
  dmi.board.version: 3.10
  dmi.chassis.asset.tag: 4CE2381FRT
  dmi.chassis.type: 3
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: dmi:bvnAMI:bvr8.07:bd08/29/2012:svnHewlett-Packard:pnp6-2306a:pvr:rvnFoxconn:rn2ABF:rvr3.10:cvnHewlett-Packard:ct3:cvr:
  dmi.product.name: p6-2306a
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1191992/+subscriptions