kernel-packages team mailing list archive

[Brad Figg <brad.figg@xxxxxxxxxxxxx>]

This bug is missing log files that will aid in diagnosing the problem.
>From a terminal window please run:

apport-collect 1392432

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
       Status: New => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1392432

Title:
  On Mellanox adapter, reboot under Bond mode loses interface

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  This is reported at HP in their bug tracker as: QXCR1001386573

  Symptom: Every time reboot under bonding mode in ubuntu14.04, the
  interface eth0/eth2 disappeared, and only bond0 showed up. The
  Mellanox driver needs to reload. Then the interfaces will appeared and
  the bonding function is working fine.

  HP CSI confirmed that the issue can be seen on Anders (m710) with two
  Mellanox Firmware Version: 2.32.1092 and 2.32.5210. Also another
  Cartridge - McDivitt (m400) has similar issue. Other Cartridge with
  Intel NIC solution does not have this problem when doing bonding. Is
  it possible that the issue is about Ubuntu & Mellanox compatibility
  problem?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1392432/+subscriptions