kernel-packages team mailing list archive

[Brian Fromme <brian.fromme@xxxxxxxxxxxxx>]

Public bug reported:

This is reported at HP in their bug tracker as: QXCR1001386573

Symptom: Every time reboot under bonding mode in ubuntu14.04, the
interface eth0/eth2 disappeared, and only bond0 showed up. The Mellanox
driver needs to reload. Then the interfaces will appeared and the
bonding function is working fine.

HP CSI confirmed that the issue can be seen on Anders (m710) with two
Mellanox Firmware Version: 2.32.1092 and 2.32.5210. Also another
Cartridge - McDivitt (m400) has similar issue. Other Cartridge with
Intel NIC solution does not have this problem when doing bonding. Is it
possible that the issue is about Ubuntu & Mellanox compatibility
problem?

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1392432

Title:
  On Mellanox adapter, reboot under Bond mode loses interface

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  This is reported at HP in their bug tracker as: QXCR1001386573

  Symptom: Every time reboot under bonding mode in ubuntu14.04, the
  interface eth0/eth2 disappeared, and only bond0 showed up. The
  Mellanox driver needs to reload. Then the interfaces will appeared and
  the bonding function is working fine.

  HP CSI confirmed that the issue can be seen on Anders (m710) with two
  Mellanox Firmware Version: 2.32.1092 and 2.32.5210. Also another
  Cartridge - McDivitt (m400) has similar issue. Other Cartridge with
  Intel NIC solution does not have this problem when doing bonding. Is
  it possible that the issue is about Ubuntu & Mellanox compatibility
  problem?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1392432/+subscriptions