← Back to team overview

kernel-packages team mailing list archive

  1. kernel-packages team
  2. Mailing list archive
  3. Message #95466

[Bug 211760] [NEW] USB Thumb Drive can't mount anymore in Hardy

  Thread Previous • Date Previous • • Thread Next 
You have been subscribed to a public bug:

I am using Hardy always updated until April 1, 08.

I was able to use USB thumb drive before and it autodetects and it shows
up in Nautilus.

But now, it never shows up anymore.

Here is the log from /var/log/syslog

Apr 4 14:06:21 NetworkManager: <debug> [1207278381.150702] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01').
Apr 4 14:06:21 NetworkManager: <debug> [1207278381.290584] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0').
Apr 4 14:06:26 NetworkManager: <debug> [1207278386.411216] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host
').
Apr 4 14:06:26 NetworkManager: <debug> [1207278386.412624] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host
_scsi_device_lun0').
Apr 4 14:06:26 NetworkManager: <debug> [1207278386.426884] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host
_scsi_device_lun0_scsi_generic').


and after sometime:

Apr 4 14:11:19 NetworkManager: <debug> [1207278679.724368] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host_scsi_device_lun0_sc si_generic').
Apr 4 14:11:19 NetworkManager: <debug> [1207278679.730117] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host_scsi_device_lun0').
Apr 4 14:11:19 NetworkManager: <debug> [1207278679.731129] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host').
Apr 4 14:11:19 NetworkManager: <debug> [1207278679.733883] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0').
Apr 4 14:11:19 NetworkManager: <debug> [1207278679.736854] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01').


and here is in dmesg:

[ 2827.107722] usb 7-3: new high speed USB device using ehci_hcd and address 5
[ 2827.128927] usb 7-3: configuration #1 chosen from 1 choice
[ 2827.347289] usbcore: registered new interface driver libusual
[ 2827.397384] Initializing USB Mass Storage driver...
[ 2827.407724] scsi5 : SCSI emulation for USB Mass Storage devices
[ 2827.408652] usbcore: registered new interface driver usb-storage
[ 2827.408657] USB Mass Storage support registered.
[ 2827.408743] usb-storage: device found at 5
[ 2827.408746] usb-storage: waiting for device to settle before scanning
[ 2828.252945] usb-storage: device scan complete
[ 2828.253298] scsi 5:0:0:0: Direct-Access     CBM      Flash Disk       5.00 PQ: 0 ANSI: 2
[ 2828.264727] sd 5:0:0:0: [sdb] 4161536 512-byte hardware sectors (2131 MB)
[ 2828.265344] sd 5:0:0:0: [sdb] Write Protect is off
[ 2828.265347] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 2828.265350] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 2828.266971] sd 5:0:0:0: [sdb] 4161536 512-byte hardware sectors (2131 MB)
[ 2828.267593] sd 5:0:0:0: [sdb] Write Protect is off
[ 2828.267597] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 2828.267599] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 2828.267603]  sdb: sdb1
[ 2828.268631] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 2828.268676] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 2836.883957] usb 7-3: reset high speed USB device using ehci_hcd and address 5
[ 2843.201216] usb 7-3: reset high speed USB device using ehci_hcd and address 5
[ 2854.655983] usb 7-3: reset high speed USB device using ehci_hcd and address 5
[ 2862.542306] usb 7-3: reset high speed USB device using ehci_hcd and address 5
[ 2874.007582] usb 7-3: reset high speed USB device using ehci_hcd and address 5
[ 2883.312835] usb 7-3: reset high speed USB device using ehci_hcd and address 5
[ 2883.445338] sd 5:0:0:0: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK,SUGGEST_OK
[ 2883.445344] end_request: I/O error, dev sdb, sector 4161312
[ 2883.445347] Buffer I/O error on device sdb1, logical block 520160
[ 2893.732543] usb 7-3: reset high speed USB device using ehci_hcd and address 5
[ 2895.516893] usb 7-3: device descriptor read/64, error -110
[ 2899.201573] usb 7-3: device descriptor read/64, error -110
[ 2899.225502] usb 7-3: reset high speed USB device using ehci_hcd and address 5
[ 2901.423418] usb 7-3: device descriptor read/64, error -110
[ 2904.812330] usb 7-3: device descriptor read/64, error -110
[ 2904.831608] usb 7-3: reset high speed USB device using ehci_hcd and address 5
[ 2905.572981] usb 7-3: device descriptor read/8, error -110
[ 2906.278984] usb 7-3: device descriptor read/8, error -110
[ 2906.301863] usb 7-3: reset high speed USB device using ehci_hcd and address 5
[ 2909.068063] usb 7-3: device descriptor read/8, error -110
[ 2911.773818] usb 7-3: device descriptor read/8, error -110
[ 2911.852035] usb 7-3: USB disconnect, address 5
[ 2911.852416] scsi 5:0:0:0: Device offlined - not ready after error recovery
[ 2911.856781] scsi 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 2911.856789] end_request: I/O error, dev sdb, sector 4161312
[ 2911.856794] Buffer I/O error on device sdb1, logical block 520160
[ 2911.856845] Buffer I/O error on device sdb1, logical block 520186
[ 2911.856856] Buffer I/O error on device sdb1, logical block 520186
[ 2911.856885] Buffer I/O error on device sdb1, logical block 0
[ 2911.856893] Buffer I/O error on device sdb1, logical block 1
[ 2911.856899] Buffer I/O error on device sdb1, logical block 0
[ 2911.856912] Buffer I/O error on device sdb1, logical block 0
[ 2911.856933] Buffer I/O error on device sdb1, logical block 520187
[ 2911.856948] Buffer I/O error on device sdb1, logical block 520187
[ 2911.856961] Buffer I/O error on device sdb1, logical block 520187
[ 2911.857349] scsi 5:0:0:0: rejecting I/O to dead device
[ 2911.967837] usb 7-3: new high speed USB device using ehci_hcd and address 6
[ 2919.211377] usb 7-3: device descriptor read/64, error -110
[ 2923.823292] usb 7-3: device descriptor read/64, error -110
[ 2924.038873] usb 7-3: new high speed USB device using ehci_hcd and address 7
[ 2928.662647] usb 7-3: device descriptor read/64, error -110
[ 2931.942718] usb 7-3: device descriptor read/64, error -110
[ 2932.070253] usb 7-3: new high speed USB device using ehci_hcd and address 8
[ 2933.157259] usb 7-3: device descriptor read/8, error -110
[ 2934.018149] usb 7-3: device descriptor read/8, error -110
[ 2934.152601] usb 7-3: new high speed USB device using ehci_hcd and address 9
[ 2935.565661] usb 7-3: device descriptor read/8, error -110
[ 2938.600146] usb 7-3: device descriptor read/8, error -110

** Affects: linux (Ubuntu)
     Importance: Low
         Status: Incomplete

-- 
USB Thumb Drive can't mount anymore in Hardy
https://bugs.launchpad.net/bugs/211760
You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu.
  Thread Previous • Date Previous • • Thread Next