← Back to team overview

kernel-packages team mailing list archive

  1. kernel-packages team
  2. Mailing list archive
  3. Message #95467

[Bug 211760] Re: USB Thumb Drive can't mount anymore in Hardy

  Thread Previous • Date Previous • • Thread Next 
Jery Wang, thank you for reporting this bug to Ubuntu. Hardy Desktop reached EOL on May 12, 2011.
See this document for currently supported Ubuntu releases: https://wiki.ubuntu.com/Releases

Is this an issue in a supported release? If so, could you please execute the following command, as it will automatically gather debugging information, in a terminal:
apport-collect 211760

** Attachment removed: "This image is to show 2 of them , namely dban-1.0.7 & floppy0 shows at the same time. Also it shows that USB drives are usable in Hardy."
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/316717/+files/Notice%20there%20is%20a%20dban-1.0.7%20%26%20floppy0%20side%20by%20side.png

** Attachment removed: "Error message shows when I click on dban-1.0.7 instead of floppy0"
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/316718/+files/Unable%20to%20mount%20dban-1.0.7.png

** Attachment removed: "log_part.txt"
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/296827/+files/log_part.txt

** Attachment removed: "When I unmount any USB Device, this error shows."
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/316722/+files/Unmount%20USB%20Thumbdrive%20Error.png

** Attachment removed: "Image to show that USB device are not able to encode chinese filename"
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/316723/+files/Notice%20that%20there%20were%2029%20items%20shown%20on%20the%20bottom%20left%20hand%20of%20this%20window%2C%20but%20in%20fact%20my%20MP3%20Player%20consisted%20of%20more%20than%2060%20music.png

** Attachment removed: "Unmount a floppy needs to be root"
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/316724/+files/Floppy%20needs%20to%20be%20root%20to%20be%20unmounted.png

** Attachment removed: "Click on Floppy0 and this shows my content"
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/316726/+files/My%20Floppy%20Content.png

** Attachment removed: "gvm.log"
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/436168/+files/gvm.log

** Attachment removed: "lshal.txt"
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/436169/+files/lshal.txt

** Attachment removed: "devices.txt"
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/436170/+files/devices.txt

** Attachment removed: "dmesg.txt"
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/436171/+files/dmesg.txt

** Attachment removed: "udev.log"
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/436172/+files/udev.log

** Attachment removed: "grep -iE --color 'usb|sdb' /var/log/syslog"
   https://bugs.launchpad.net/ubuntu/+bug/211760/+attachment/676380/+files/log4.txt

** Package changed: ubuntu => linux (Ubuntu)

** Changed in: linux (Ubuntu)
   Importance: Undecided => Low

** Changed in: linux (Ubuntu)
       Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/211760

Title:
  USB Thumb Drive can't mount anymore in Hardy

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I am using Hardy always updated until April 1, 08.

  I was able to use USB thumb drive before and it autodetects and it
  shows up in Nautilus.

  But now, it never shows up anymore.

  Here is the log from /var/log/syslog

  Apr 4 14:06:21 NetworkManager: <debug> [1207278381.150702] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01').
  Apr 4 14:06:21 NetworkManager: <debug> [1207278381.290584] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0').
  Apr 4 14:06:26 NetworkManager: <debug> [1207278386.411216] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host
  ').
  Apr 4 14:06:26 NetworkManager: <debug> [1207278386.412624] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host
  _scsi_device_lun0').
  Apr 4 14:06:26 NetworkManager: <debug> [1207278386.426884] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host
  _scsi_device_lun0_scsi_generic').


  and after sometime:

  Apr 4 14:11:19 NetworkManager: <debug> [1207278679.724368] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host_scsi_device_lun0_sc si_generic').
  Apr 4 14:11:19 NetworkManager: <debug> [1207278679.730117] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host_scsi_device_lun0').
  Apr 4 14:11:19 NetworkManager: <debug> [1207278679.731129] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0_scsi_host').
  Apr 4 14:11:19 NetworkManager: <debug> [1207278679.733883] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01_if0').
  Apr 4 14:11:19 NetworkManager: <debug> [1207278679.736854] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_204_6025_ 30153001128C0E01').

  
  and here is in dmesg:

  [ 2827.107722] usb 7-3: new high speed USB device using ehci_hcd and address 5
  [ 2827.128927] usb 7-3: configuration #1 chosen from 1 choice
  [ 2827.347289] usbcore: registered new interface driver libusual
  [ 2827.397384] Initializing USB Mass Storage driver...
  [ 2827.407724] scsi5 : SCSI emulation for USB Mass Storage devices
  [ 2827.408652] usbcore: registered new interface driver usb-storage
  [ 2827.408657] USB Mass Storage support registered.
  [ 2827.408743] usb-storage: device found at 5
  [ 2827.408746] usb-storage: waiting for device to settle before scanning
  [ 2828.252945] usb-storage: device scan complete
  [ 2828.253298] scsi 5:0:0:0: Direct-Access     CBM      Flash Disk       5.00 PQ: 0 ANSI: 2
  [ 2828.264727] sd 5:0:0:0: [sdb] 4161536 512-byte hardware sectors (2131 MB)
  [ 2828.265344] sd 5:0:0:0: [sdb] Write Protect is off
  [ 2828.265347] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
  [ 2828.265350] sd 5:0:0:0: [sdb] Assuming drive cache: write through
  [ 2828.266971] sd 5:0:0:0: [sdb] 4161536 512-byte hardware sectors (2131 MB)
  [ 2828.267593] sd 5:0:0:0: [sdb] Write Protect is off
  [ 2828.267597] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
  [ 2828.267599] sd 5:0:0:0: [sdb] Assuming drive cache: write through
  [ 2828.267603]  sdb: sdb1
  [ 2828.268631] sd 5:0:0:0: [sdb] Attached SCSI removable disk
  [ 2828.268676] sd 5:0:0:0: Attached scsi generic sg2 type 0
  [ 2836.883957] usb 7-3: reset high speed USB device using ehci_hcd and address 5
  [ 2843.201216] usb 7-3: reset high speed USB device using ehci_hcd and address 5
  [ 2854.655983] usb 7-3: reset high speed USB device using ehci_hcd and address 5
  [ 2862.542306] usb 7-3: reset high speed USB device using ehci_hcd and address 5
  [ 2874.007582] usb 7-3: reset high speed USB device using ehci_hcd and address 5
  [ 2883.312835] usb 7-3: reset high speed USB device using ehci_hcd and address 5
  [ 2883.445338] sd 5:0:0:0: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK,SUGGEST_OK
  [ 2883.445344] end_request: I/O error, dev sdb, sector 4161312
  [ 2883.445347] Buffer I/O error on device sdb1, logical block 520160
  [ 2893.732543] usb 7-3: reset high speed USB device using ehci_hcd and address 5
  [ 2895.516893] usb 7-3: device descriptor read/64, error -110
  [ 2899.201573] usb 7-3: device descriptor read/64, error -110
  [ 2899.225502] usb 7-3: reset high speed USB device using ehci_hcd and address 5
  [ 2901.423418] usb 7-3: device descriptor read/64, error -110
  [ 2904.812330] usb 7-3: device descriptor read/64, error -110
  [ 2904.831608] usb 7-3: reset high speed USB device using ehci_hcd and address 5
  [ 2905.572981] usb 7-3: device descriptor read/8, error -110
  [ 2906.278984] usb 7-3: device descriptor read/8, error -110
  [ 2906.301863] usb 7-3: reset high speed USB device using ehci_hcd and address 5
  [ 2909.068063] usb 7-3: device descriptor read/8, error -110
  [ 2911.773818] usb 7-3: device descriptor read/8, error -110
  [ 2911.852035] usb 7-3: USB disconnect, address 5
  [ 2911.852416] scsi 5:0:0:0: Device offlined - not ready after error recovery
  [ 2911.856781] scsi 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
  [ 2911.856789] end_request: I/O error, dev sdb, sector 4161312
  [ 2911.856794] Buffer I/O error on device sdb1, logical block 520160
  [ 2911.856845] Buffer I/O error on device sdb1, logical block 520186
  [ 2911.856856] Buffer I/O error on device sdb1, logical block 520186
  [ 2911.856885] Buffer I/O error on device sdb1, logical block 0
  [ 2911.856893] Buffer I/O error on device sdb1, logical block 1
  [ 2911.856899] Buffer I/O error on device sdb1, logical block 0
  [ 2911.856912] Buffer I/O error on device sdb1, logical block 0
  [ 2911.856933] Buffer I/O error on device sdb1, logical block 520187
  [ 2911.856948] Buffer I/O error on device sdb1, logical block 520187
  [ 2911.856961] Buffer I/O error on device sdb1, logical block 520187
  [ 2911.857349] scsi 5:0:0:0: rejecting I/O to dead device
  [ 2911.967837] usb 7-3: new high speed USB device using ehci_hcd and address 6
  [ 2919.211377] usb 7-3: device descriptor read/64, error -110
  [ 2923.823292] usb 7-3: device descriptor read/64, error -110
  [ 2924.038873] usb 7-3: new high speed USB device using ehci_hcd and address 7
  [ 2928.662647] usb 7-3: device descriptor read/64, error -110
  [ 2931.942718] usb 7-3: device descriptor read/64, error -110
  [ 2932.070253] usb 7-3: new high speed USB device using ehci_hcd and address 8
  [ 2933.157259] usb 7-3: device descriptor read/8, error -110
  [ 2934.018149] usb 7-3: device descriptor read/8, error -110
  [ 2934.152601] usb 7-3: new high speed USB device using ehci_hcd and address 9
  [ 2935.565661] usb 7-3: device descriptor read/8, error -110
  [ 2938.600146] usb 7-3: device descriptor read/8, error -110

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/211760/+subscriptions
  Thread Previous • Date Previous • • Thread Next