kernel-packages team mailing list archive

[Doug McMahon <1401960@xxxxxxxxxxxxxxxxxx>]

/dev/sdd:

ATA device, with non-removable media
	Model Number:       ST500LT012-1DG142                       
	Serial Number:      S3P8W8YR
	Firmware Revision:  0001SDM1
	Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
	Used: unknown (minor revision code 0x0029) 
	Supported: 8 7 6 5 
	Likely used: 8
Configuration:
	Logical		max	current
	cylinders	16383	16383
	heads		16	16
	sectors/track	63	63
	--
	CHS current addressable sectors:   16514064
	LBA    user addressable sectors:  268435455
	LBA48  user addressable sectors:  976773168
	Logical  Sector size:                   512 bytes
	Physical Sector size:                  4096 bytes
	Logical Sector-0 offset:                  0 bytes
	device size with M = 1024*1024:      476940 MBytes
	device size with M = 1000*1000:      500107 MBytes (500 GB)
	cache/buffer size  = unknown
	Form Factor: 2.5 inch
	Nominal Media Rotation Rate: 5400
Capabilities:
	LBA, IORDY(can be disabled)
	Queue depth: 32
	Standby timer values: spec'd by Standard, no device specific minimum
	R/W multiple sector transfer: Max = 16	Current = 16
	Advanced power management level: 128
	Recommended acoustic management value: 208, current value: 0
	DMA: mdma0 mdma1 *mdma2 udma0 udma1 udma2 udma3 udma4 udma5 udma6 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   *	SMART feature set
	    	Security Mode feature set
	   *	Power Management feature set
	   *	Write cache
	   *	Look-ahead
	   *	Host Protected Area feature set
	   *	WRITE_BUFFER command
	   *	READ_BUFFER command
	   *	NOP cmd
	   *	DOWNLOAD_MICROCODE
	   *	Advanced Power Management feature set
	    	Power-Up In Standby feature set
	   *	SET_FEATURES required to spinup after power up
	    	SET_MAX security extension
	   *	48-bit Address feature set
	   *	Device Configuration Overlay feature set
	   *	Mandatory FLUSH_CACHE
	   *	FLUSH_CACHE_EXT
	   *	SMART error logging
	   *	SMART self-test
	   *	General Purpose Logging feature set
	   *	WRITE_{DMA|MULTIPLE}_FUA_EXT
	   *	64-bit World wide name
	   *	IDLE_IMMEDIATE with UNLOAD
	   *	Write-Read-Verify feature set
	   *	WRITE_UNCORRECTABLE_EXT command
	   *	{READ,WRITE}_DMA_EXT_GPL commands
	   *	Segmented DOWNLOAD_MICROCODE
	   *	Gen1 signaling speed (1.5Gb/s)
	   *	Gen2 signaling speed (3.0Gb/s)
	   *	Gen3 signaling speed (6.0Gb/s)
	   *	Native Command Queueing (NCQ)
	   *	Host-initiated interface power management
	   *	Phy event counters
	   *	Idle-Unload when NCQ is active
	   *	READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
	    	Device-initiated interface power management
	   *	Software settings preservation
	   *	SMART Command Transport (SCT) feature set
	   *	SCT Write Same (AC2)
	   *	SCT Features Control (AC4)
	   *	SCT Data Tables (AC5)
	    	unknown 206[12] (vendor specific)
Security: 
	Master password revision code = 65534
		supported
	not	enabled
	not	locked
	not	frozen
	not	expired: security count
		supported: enhanced erase
	98min for SECURITY ERASE UNIT. 98min for ENHANCED SECURITY ERASE UNIT. 
Logical Unit WWN Device Identifier: 5000c50074dfa560
	NAA		: 5
	IEEE OUI	: 000c50
	Unique ID	: 074dfa560
Checksum: correct

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1401960

Title:
  usb 3 hdd drive takes inordinate time to become available after
  attaching

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Test case:
  Boot up, log in
  attach a usb 3 hdd drive (type that doesn't have it's own power supply

  What happens:
  Takes about 30 -35 sec. before the drive shows in nautilus & unity launcher
  What's expected:
  drive should show in a sec. or less

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.16.0-25-generic 3.16.0-25.33
  ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7
  Uname: Linux 3.16.0-25-generic x86_64
  ApportVersion: 2.15-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  doug       2152 F.... pulseaudio
   /dev/snd/controlC1:  doug       2152 F.... pulseaudio
  CurrentDesktop: Unity
  Date: Fri Dec 12 11:10:14 2014
  InstallationDate: Installed on 2014-11-16 (26 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20141114)
  MachineType: LENOVO 20217
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=91a821ed-7160-439b-8519-939faa93bf90 ro quiet splash
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-25-generic N/A
   linux-backports-modules-3.16.0-25-generic  N/A
   linux-firmware                             1.139
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 09/18/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 74CN44WW(V3.05)
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: VIQY0Y1
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058STD
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo IdeaPad Y510P
  dmi.modalias: dmi:bvnLENOVO:bvr74CN44WW(V3.05):bd09/18/2013:svnLENOVO:pn20217:pvrLenovoIdeaPadY510P:rvnLENOVO:rnVIQY0Y1:rvr31900058STD:cvnLENOVO:ct10:cvrLenovoIdeaPadY510P:
  dmi.product.name: 20217
  dmi.product.version: Lenovo IdeaPad Y510P
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1401960/+subscriptions