kubuntu-council team mailing list archive

[Walter Lapchynski <wxl@xxxxxxxxxx>]

Some comments about encryption.

Diff comments:

> 
> === added file 'testcases/image/Full disk install encryption BIOS internet'
> --- testcases/image/Full disk install encryption BIOS internet	1970-01-01 00:00:00 +0000
> +++ testcases/image/Full disk install encryption BIOS internet	2019-10-12 04:52:34 +0000
> @@ -0,0 +1,32 @@
> +<em>Lubuntu QA-test: Full disk install, encryption, BIOS and internet</em>
> +<em>Proceed in your native language if you wish. Instructions will remain in English</em>
> +
> +<dl>
> +    <dt>Boot up the image and select your language</dt>
> +        <dd>The system boots properly and loads the language selection menu</dd>
> +    <dt>Press enter over the "Start FAMILY" text</dt>
> +        <dd>The system should boot to the live desktop</dd>
> +    <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
> +    <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
> +        <dd>The installer should be localized in your language</dd>
> +    <dt>Select your timezone and click "Next"</dt>
> +        <dd>A map should appear allowing you to select your timezone, and if the internet is connected, should already be accurate</dd>
> +    <dt>Select your keyboard layout and click "Next"</dt>
> +        <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
> +    <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
> +        <dd>Please ensure you see BIOS listed besides your drive. If you see EFI it's covered in another testcase</dd>
> +        <dd>A partition layout should be shown which uses all disk space, and the bootloader  should be installed to the correct disk</dd>
> +        <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>

Shouldn't this be followed by a comment to verify that "encrypt system" is checked?

> +        <dd>Confirm Boot Loader location is correct</dd>
> +        <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
> +    <dt>Enter details about the main system user and click "Next"</dt>
> +        <dd>All details (name, username box-name etc) should be correctly filled in</dd>
> +    <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
> +        <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
> +        <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
> +    <dt>Allow the machine to reboot</dt>
> +        <dd>You should be required to enter the encryption passphrase before login</dd>
> +        <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
> +</dl>
> +<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
> +    If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
> 
> === added file 'testcases/image/Full disk install encryption BIOS offline'
> --- testcases/image/Full disk install encryption BIOS offline	1970-01-01 00:00:00 +0000
> +++ testcases/image/Full disk install encryption BIOS offline	2019-10-12 04:52:34 +0000
> @@ -0,0 +1,39 @@
> +<em>Lubuntu QA-test: Full disk install, encryption, BIOS and no internet</em>
> +<em>Proceed in your native language if you wish. Instructions will remain in English</em>
> +<em>Please ensure you have no internet for this test (unplug cable or disable if VM)</em> 
> +
> +<dl>
> +    <dt>Boot up the image and select your language</dt>
> +        <dd>The system boots properly and loads the language selection menu</dd>
> +    <dt>Press enter over the "Start FAMILY" text</dt>
> +        <dd>The system should boot to the live desktop</dd>
> +    <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
> +        <dd>You should note a prominent warning ""The system is not connected to the Internet"</dd>
> +    <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
> +        <dd>The installer should be localized in your language</dd>
> +    <dt>Select your timezone and click "Next"</dt>
> +        <dd>A map should appear allowing you to select your timezone, and if the internet was connected, it should already be accurate. In this case inaccurate is expected.</dd>
> +        <dd>Select Region from Region dropdown</dd>
> +        <dd>Select Zone from Zone dropdown</dd>
> +        <dd>Please note system language if it's not correct</dd>
> +        <dd>Please note numbers and dates locale if it's not correct</dd>
> +    <dt>Select your keyboard layout and click "Next"</dt>
> +        <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
> +    <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
> +        <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
> +        <dd>Please ensure you see BIOS listed besides your drive. If you see EFI it's covered in another testcase</dd>
> +        <dd>A partition layout should be shown which uses all disk space, and the bootloader  should be installed to the correct disk</dd>
> +        <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>
> +        <dd>Ensure "Encrypt system" checkbox is not ticked</dd>

I think you mean ensure "Encrypt system" *is* checked?

> +        <dd>Confirm Boot Loader location is correct</dd>
> +    <dt>Enter details about the main system user and click "Next"</dt>
> +        <dd>All details (name, username box-name etc) should be correctly filled in</dd>
> +    <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
> +        <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
> +        <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
> +    <dt>Allow the machine to reboot</dt>
> +        <dd>You should be required to enter the encryption passphrase before login</dd>
> +        <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
> +</dl>
> +<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
> +    If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
> 
> === added file 'testcases/image/Full disk install encryption EFI internet'
> --- testcases/image/Full disk install encryption EFI internet	1970-01-01 00:00:00 +0000
> +++ testcases/image/Full disk install encryption EFI internet	2019-10-12 04:52:34 +0000
> @@ -0,0 +1,32 @@
> +<em>Lubuntu QA-test: Full disk install, encryption, EFI and internet</em>
> +<em>Proceed in your native language if you wish. Instructions will remain in English</em>
> +
> +<dl>
> +    <dt>Boot up the image and select your language</dt>
> +        <dd>The system boots properly and loads the language selection menu</dd>
> +    <dt>Press enter over the "Start FAMILY" text</dt>
> +        <dd>The system should boot to the live desktop</dd>
> +    <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
> +    <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
> +        <dd>The installer should be localized in your language</dd>
> +    <dt>Select your timezone and click "Next"</dt>
> +        <dd>A map should appear allowing you to select your timezone, and if the internet is connected, should already be accurate</dd>
> +    <dt>Select your keyboard layout and click "Next"</dt>
> +        <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
> +    <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
> +        <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
> +        <dd>A partition layout should be shown which uses all disk space, and the bootloader  should be installed to the correct disk</dd>
> +        <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>

Shouldn't this be followed by a comment to verify that "encrypt system" is checked?

> +        <dd>Confirm Boot Loader location is correct</dd>
> +        <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
> +    <dt>Enter details about the main system user and click "Next"</dt>
> +        <dd>All details (name, username box-name etc) should be correctly filled in</dd>
> +    <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
> +        <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
> +        <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
> +    <dt>Allow the machine to reboot</dt>
> +        <dd>You should be required to enter the encryption passphrase before login</dd>
> +        <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
> +</dl>
> +<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
> +    If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
> 
> === added file 'testcases/image/Full disk install encryption EFI offline'
> --- testcases/image/Full disk install encryption EFI offline	1970-01-01 00:00:00 +0000
> +++ testcases/image/Full disk install encryption EFI offline	2019-10-12 04:52:34 +0000
> @@ -0,0 +1,39 @@
> +<em>Lubuntu QA-test: Full disk install, encryption, EFI and no internet</em>
> +<em>Proceed in your native language if you wish. Instructions will remain in English</em>
> +<em>Please ensure you have no internet for this test (unplug cable or disable if VM)</em> 
> +
> +<dl>
> +    <dt>Boot up the image and select your language</dt>
> +        <dd>The system boots properly and loads the language selection menu</dd>
> +    <dt>Press enter over the "Start FAMILY" text</dt>
> +        <dd>The system should boot to the live desktop</dd>
> +    <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
> +        <dd>You should note a prominent warning ""The system is not connected to the Internet"</dd>
> +    <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
> +        <dd>The installer should be localized in your language</dd>
> +    <dt>Select your timezone and click "Next"</dt>
> +        <dd>A map should appear allowing you to select your timezone, and if the internet was connected, it should already be accurate. In this case inaccurate is expected.</dd>
> +        <dd>Select Region from Region dropdown</dd>
> +        <dd>Select Zone from Zone dropdown</dd>
> +        <dd>Please note system language if it's not correct</dd>
> +        <dd>Please note numbers and dates locale if it's not correct</dd>
> +    <dt>Select your keyboard layout and click "Next"</dt>
> +        <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
> +    <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
> +        <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
> +        <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
> +        <dd>A partition layout should be shown which uses all disk space, and the bootloader  should be installed to the correct disk</dd>
> +        <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>
> +        <dd>Ensure "Encrypt system" checkbox is not ticked</dd>

I think you mean ensure "Encrypt system" *is* checked?

> +        <dd>Confirm Boot Loader location is correct</dd>
> +    <dt>Enter details about the main system user and click "Next"</dt>
> +        <dd>All details (name, username box-name etc) should be correctly filled in</dd>
> +    <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
> +        <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
> +        <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
> +    <dt>Allow the machine to reboot</dt>
> +        <dd>You should be required to enter the encryption passphrase before login</dd>
> +        <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
> +</dl>
> +<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
> +    If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
> 
> === added file 'testcases/image/Full disk install encryption SecureEFI internet'
> --- testcases/image/Full disk install encryption SecureEFI internet	1970-01-01 00:00:00 +0000
> +++ testcases/image/Full disk install encryption SecureEFI internet	2019-10-12 04:52:34 +0000
> @@ -0,0 +1,32 @@
> +<em>Lubuntu QA-test: Full disk install, encryption, Secure EFI and internet</em>
> +<em>Proceed in your native language if you wish. Instructions will remain in English</em>
> +
> +<dl>
> +    <dt>Boot up the image and select your language</dt>
> +        <dd>The system boots properly and loads the language selection menu</dd>
> +    <dt>Press enter over the "Start FAMILY" text</dt>
> +        <dd>The system should boot to the live desktop</dd>
> +    <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
> +    <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
> +        <dd>The installer should be localized in your language</dd>
> +    <dt>Select your timezone and click "Next"</dt>
> +        <dd>A map should appear allowing you to select your timezone, and if the internet is connected, should already be accurate</dd>
> +    <dt>Select your keyboard layout and click "Next"</dt>
> +        <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
> +    <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
> +        <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
> +        <dd>A partition layout should be shown which uses all disk space, and the bootloader  should be installed to the correct disk</dd>
> +        <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>

Shouldn't this be followed by a comment to verify that "encrypt system" is checked?

> +        <dd>Confirm Boot Loader location is correct</dd>
> +        <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
> +    <dt>Enter details about the main system user and click "Next"</dt>
> +        <dd>All details (name, username box-name etc) should be correctly filled in</dd>
> +    <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
> +        <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
> +        <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
> +    <dt>Allow the machine to reboot</dt>
> +        <dd>You should be required to enter the encryption passphrase before login</dd>
> +        <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
> +</dl>
> +<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
> +    If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
> 
> === added file 'testcases/image/Full disk install encryption SecureEFI offline'
> --- testcases/image/Full disk install encryption SecureEFI offline	1970-01-01 00:00:00 +0000
> +++ testcases/image/Full disk install encryption SecureEFI offline	2019-10-12 04:52:34 +0000
> @@ -0,0 +1,39 @@
> +<em>Lubuntu QA-test: Full disk install, encryption, Secure EFI and no internet</em>
> +<em>Proceed in your native language if you wish. Instructions will remain in English</em>
> +<em>Please ensure you have no internet for this test (unplug cable or disable if VM)</em> 
> +
> +<dl>
> +    <dt>Boot up the image and select your language</dt>
> +        <dd>The system boots properly and loads the language selection menu</dd>
> +    <dt>Press enter over the "Start FAMILY" text</dt>
> +        <dd>The system should boot to the live desktop</dd>
> +    <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
> +        <dd>You should note a prominent warning ""The system is not connected to the Internet"</dd>
> +    <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
> +        <dd>The installer should be localized in your language</dd>
> +    <dt>Select your timezone and click "Next"</dt>
> +        <dd>A map should appear allowing you to select your timezone, and if the internet was connected, it should already be accurate. In this case inaccurate is expected.</dd>
> +        <dd>Select Region from Region dropdown</dd>
> +        <dd>Select Zone from Zone dropdown</dd>
> +        <dd>Please note system language if it's not correct</dd>
> +        <dd>Please note numbers and dates locale if it's not correct</dd>
> +    <dt>Select your keyboard layout and click "Next"</dt>
> +        <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
> +    <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
> +        <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
> +        <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
> +        <dd>A partition layout should be shown which uses all disk space, and the bootloader  should be installed to the correct disk</dd>
> +        <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>
> +        <dd>Ensure "Encrypt system" checkbox is not ticked</dd>

I think you mean ensure "Encrypt system" *is* checked?

> +        <dd>Confirm Boot Loader location is correct</dd>
> +    <dt>Enter details about the main system user and click "Next"</dt>
> +        <dd>All details (name, username box-name etc) should be correctly filled in</dd>
> +    <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
> +        <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
> +        <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
> +    <dt>Allow the machine to reboot</dt>
> +        <dd>You should be required to enter the encryption passphrase before login</dd>
> +        <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
> +</dl>
> +<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
> +    If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>


-- 
https://code.launchpad.net/~guiverc/ubuntu-manual-tests/lubuntu-calamares/+merge/372039
Your team Ubuntu Testcase Admins is subscribed to branch lp:ubuntu-manual-tests.