kubuntu-council team mailing list archive
-
kubuntu-council team
-
Mailing list archive
-
Message #00453
[Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
Chris Guiver has proposed merging lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests.
Commit message:
Intended for Lubuntu 19.10 and up, test cases with emphasis on Calamares installer and the various options (bios/uefi/uefi-secure, encrypt/no-encrypt, web/no-web). Lubuntu task https://phab.lubuntu.me/T56
Requested reviews:
Simon Quigley (tsimonq2)
For more details, see:
https://code.launchpad.net/~guiverc/ubuntu-manual-tests/lubuntu-calamares/+merge/372039
These started as "1701_Install using Calamares (entire disk)" which needs to be kept for Lubuntu 18.04 LTS, and are primarily just small variations for different use cases ((bios/uefi/uefi-secure, encrypt/no-encrypt, web/no-web) and to avoid using https://phab.lubuntu.me/w/release-team/testing-checklist/ again...
The Secure-EFI & EFI are actually identical; and my filenames will almost certainly need changing.
For more details please see https://phab.lubuntu.me/T56#2271
--
Your team Ubuntu Testcase Admins is subscribed to branch lp:ubuntu-manual-tests.
=== added file 'testcases/image/full_disk_install_encypt_bios_noweb.txt'
--- testcases/image/full_disk_install_encypt_bios_noweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_encypt_bios_noweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,38 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+<em>Please ensure you have no internet for this test (unplug cable or disable if VM)</em>
+
+<dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dd>You should note a prominent warning ""The system is not connected to the Internet"</dd>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet was connected, it should already be accurate. In this case inaccurate is expected.</dd>
+ <dd>Select Region from Region dropdown</dd>
+ <dd>Select Zone from Zone dropdown</dd>
+ <dd>Please note system language if it's not correct</dd>
+ <dd>Please note numbers and dates locale if it's not correct</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dd>Please ensure you see BIOS listed besides your drive. If you see EFI it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>
+ <dd>Ensure "Encrypt system" checkbox is not ticked</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>You should be required to enter the encryption passphrase before login</dd>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
=== added file 'testcases/image/full_disk_install_encypt_bios_waitweb.txt'
--- testcases/image/full_disk_install_encypt_bios_waitweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_encypt_bios_waitweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,31 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+
+<dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet is connected, should already be accurate</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
+ <dd>Please ensure you see BIOS listed besides your drive. If you see EFI it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>You should be required to enter the encryption passphrase before login</dd>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
=== added file 'testcases/image/full_disk_install_encypt_efi_noweb.txt'
--- testcases/image/full_disk_install_encypt_efi_noweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_encypt_efi_noweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,38 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+<em>Please ensure you have no internet for this test (unplug cable or disable if VM)</em>
+
+<dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dd>You should note a prominent warning ""The system is not connected to the Internet"</dd>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet was connected, it should already be accurate. In this case inaccurate is expected.</dd>
+ <dd>Select Region from Region dropdown</dd>
+ <dd>Select Zone from Zone dropdown</dd>
+ <dd>Please note system language if it's not correct</dd>
+ <dd>Please note numbers and dates locale if it's not correct</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>
+ <dd>Ensure "Encrypt system" checkbox is not ticked</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>You should be required to enter the encryption passphrase before login</dd>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
=== added file 'testcases/image/full_disk_install_encypt_efi_waitweb.txt'
--- testcases/image/full_disk_install_encypt_efi_waitweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_encypt_efi_waitweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,31 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+
+<dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet is connected, should already be accurate</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
+ <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>You should be required to enter the encryption passphrase before login</dd>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
=== added file 'testcases/image/full_disk_install_encypt_secefi_noweb.txt'
--- testcases/image/full_disk_install_encypt_secefi_noweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_encypt_secefi_noweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,38 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+<em>Please ensure you have no internet for this test (unplug cable or disable if VM)</em>
+
+<dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dd>You should note a prominent warning ""The system is not connected to the Internet"</dd>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet was connected, it should already be accurate. In this case inaccurate is expected.</dd>
+ <dd>Select Region from Region dropdown</dd>
+ <dd>Select Zone from Zone dropdown</dd>
+ <dd>Please note system language if it's not correct</dd>
+ <dd>Please note numbers and dates locale if it's not correct</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>
+ <dd>Ensure "Encrypt system" checkbox is not ticked</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>You should be required to enter the encryption passphrase before login</dd>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
=== added file 'testcases/image/full_disk_install_encypt_secefi_waitweb.txt'
--- testcases/image/full_disk_install_encypt_secefi_waitweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_encypt_secefi_waitweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,31 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+
+<dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet is connected, should already be accurate</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" and "Encrypt system" radio boxes, enter details and click "Next"</dt>
+ <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>After ticking the "Encrypt system" radio box, please enter (and confirm) passphrase</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>You should be required to enter the encryption passphrase before login</dd>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
=== added file 'testcases/image/full_disk_install_noencypt_bios_noweb.txt'
--- testcases/image/full_disk_install_noencypt_bios_noweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_noencypt_bios_noweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,36 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+<em>Please ensure you have no internet for this test (unplug cable or disable if VM)</em>
+
+<dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dd>You should note a prominent warning ""The system is not connected to the Internet"</dd>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet was connected, it should already be accurate. In this case inaccurate is expected.</dd>
+ <dd>Select Region from Region dropdown</dd>
+ <dd>Select Zone from Zone dropdown</dd>
+ <dd>Please note system language if it's not correct</dd>
+ <dd>Please note numbers and dates locale if it's not correct</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" radio box and click "Next"</dt>
+ <dd>Please ensure you see BIOS listed besides your drive. If you see EFI it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>Ensure "Encrypt system" checkbox is not ticked</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
=== added file 'testcases/image/full_disk_install_noencypt_bios_waitweb.txt'
--- testcases/image/full_disk_install_noencypt_bios_waitweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_noencypt_bios_waitweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,31 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+<em>Please ensure you have internet for this test</em?>
+
+ <dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet is connected, should already be accurate</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" radio box and click "Next"</dt>
+ <dd>Please ensure you see BIOS listed besides your drive. If you see EFI it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>Ensure "Encrypt system" checkbox is not ticked</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
=== added file 'testcases/image/full_disk_install_noencypt_efi_noweb.txt'
--- testcases/image/full_disk_install_noencypt_efi_noweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_noencypt_efi_noweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,36 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+<em>Please ensure you have no internet for this test (unplug cable or disable if VM)</em>
+
+<dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dd>You should note a prominent warning ""The system is not connected to the Internet"</dd>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet was connected, it should already be accurate. In this case inaccurate is expected.</dd>
+ <dd>Select Region from Region dropdown</dd>
+ <dd>Select Zone from Zone dropdown</dd>
+ <dd>Please note system language if it's not correct</dd>
+ <dd>Please note numbers and dates locale if it's not correct</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" radio box and click "Next"</dt>
+ <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>Ensure "Encrypt system" checkbox is not ticked</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
=== added file 'testcases/image/full_disk_install_noencypt_efi_waitweb.txt'
--- testcases/image/full_disk_install_noencypt_efi_waitweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_noencypt_efi_waitweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,31 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+<em>Please ensure you have internet for this test</em?>
+
+ <dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet is connected, should already be accurate</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" radio box and click "Next"</dt>
+ <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>Ensure "Encrypt system" checkbox is not ticked</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
=== added file 'testcases/image/full_disk_install_noencypt_secefi_noweb.txt'
--- testcases/image/full_disk_install_noencypt_secefi_noweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_noencypt_secefi_noweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,36 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+<em>Please ensure you have no internet for this test (unplug cable or disable if VM)</em>
+
+<dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dd>You should note a prominent warning ""The system is not connected to the Internet"</dd>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet was connected, it should already be accurate. In this case inaccurate is expected.</dd>
+ <dd>Select Region from Region dropdown</dd>
+ <dd>Select Zone from Zone dropdown</dd>
+ <dd>Please note system language if it's not correct</dd>
+ <dd>Please note numbers and dates locale if it's not correct</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" radio box and click "Next"</dt>
+ <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>Ensure "Encrypt system" checkbox is not ticked</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
=== added file 'testcases/image/full_disk_install_noencypt_secefi_waitweb.txt'
--- testcases/image/full_disk_install_noencypt_secefi_waitweb.txt 1970-01-01 00:00:00 +0000
+++ testcases/image/full_disk_install_noencypt_secefi_waitweb.txt 2019-08-30 05:22:46 +0000
@@ -0,0 +1,31 @@
+<em>Proceed in your native language if you wish. Instructions will remain in English</em>
+<em>Please ensure you have internet for this test</em?>
+
+ <dl>
+ <dt>Boot up the image and select your language</dt>
+ <dd>The system boots properly and loads the language selection menu</dd>
+ <dt>Press enter over the "Start FAMILY" text</dt>
+ <dd>The system should boot to the live desktop</dd>
+ <dt>On the desktop, click the "Install FAMILY XX.YY" icon to open the installer</dt>
+ <dt>Select your language/localization in the dropdown menu and click "Next"</dt>
+ <dd>The installer should be localized in your language</dd>
+ <dt>Select your timezone and click "Next"</dt>
+ <dd>A map should appear allowing you to select your timezone, and if the internet is connected, should already be accurate</dd>
+ <dt>Select your keyboard layout and click "Next"</dt>
+ <dd>Test the keyboard layout in the given box, which should be set correctly</dd>
+ <dt>Select the "Erase disk" radio box and click "Next"</dt>
+ <dd>Please ensure you see EFI listed besides your drive. If you see BIOS it's covered in another testcase</dd>
+ <dd>A partition layout should be shown which uses all disk space, and the bootloader should be installed to the correct disk</dd>
+ <dd>Ensure "Encrypt system" checkbox is not ticked</dd>
+ <dd>Confirm Boot Loader location is correct</dd>
+ <dd>If "Erase disk" does not show, your target device has a mounted partition. Please close installer, umount your partitions (possibly a swap partition that was mounted on boot), and return to the 'click the "Install FAMILY XX.YY" icon step'</dd>
+ <dt>Enter details about the main system user and click "Next"</dt>
+ <dd>All details (name, username box-name etc) should be correctly filled in</dd>
+ <dt>Confirm the details you entered throughout the install are accurate and click "Install", then "Install now"</dt>
+ <dd>All details (location, keyboard, partitions etc) should match what you entered</dd>
+ <dd>The slideshow should correctly display, and when the installation is done, a menu should display asking you to confirm your settings</dd>
+ <dt>Allow the machine to reboot</dt>
+ <dd>The system boots properly and loads into FAMILY showing the username you entered</dd>
+</dl>
+<strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
+ If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong>
Follow ups
-
[Merge] lp:~lubuntu-qa/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Chris Guiver, 2020-03-18
-
Re: [Merge] lp:~lubuntu-qa/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Chris Guiver, 2020-03-17
-
Re: [Merge] lp:~lubuntu-qa/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2020-03-04
-
Re: [Merge] lp:~lubuntu-qa/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Brian Murray, 2020-03-04
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2019-12-31
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2019-12-31
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2019-10-13
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Chris Guiver, 2019-10-13
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2019-10-13
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Chris Guiver, 2019-10-13
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2019-10-13
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2019-10-13
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2019-10-13
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2019-10-13
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2019-10-13
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2019-09-20
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Chris Guiver, 2019-09-20
-
Re: [Merge] lp:~guiverc/ubuntu-manual-tests/lubuntu-calamares into lp:ubuntu-manual-tests
From: Walter Lapchynski, 2019-09-20