linaro-pkg team mailing list archive

[Ricardo Salveti <rsalveti@xxxxxxxxxxxx>]

I just tested with my ES2.0 board but unfortunately I'm unable to
reproduce the issue:

U-Boot SPL 2011.09 (Nov 22 2011 - 20:54:48)
Texas Instruments OMAP4430 ES2.0
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img

U-Boot 2011.09 (Nov 22 2011 - 20:54:48)

CPU  : OMAP4430
Board: OMAP4 Panda
I2C:   ready
DRAM:  1 GiB
WARNING: Caches not enabled
MMC:   OMAP SD/MMC: 0
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0 
reading uEnv.txt

** Unable to read "uEnv.txt" from mmc 0:1 **
reading boot.scr

514 bytes read
Loaded script from boot.scr
Running bootscript from mmc0 ...
## Executing script at 82000000
reading uImage

5176344 bytes read
reading uInitrd

1848112 bytes read
reading board.dtb

356 bytes read
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Ubuntu Kernel
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    5176280 Bytes = 4.9 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
   Image Name:   Ubuntu Initrd
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    1848048 Bytes = 1.8 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 815f0000
   Booting using the fdt blob at 0x815f0000
   Loading Kernel Image ... OK
OK
   reserving fdt memory region: addr=9d000000 size=3000000
   reserving fdt memory region: addr=b0000000 size=10000000
   Using Device Tree in place at 815f0000, end 815f3163

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Linux version 3.1.0-1402-linaro-lt-omap (buildd@buttercup) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #5~oneiric1-Ubuntu SMP PREEMPT Sat Nov 19 05:23:05 UTC 2011 (Ubuntu 3.1.0-1402.5~oneiric1-linaro-lt-omap 3.1.1)
[    0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: OMAP4 Panda board, model: TI OMAP4 PandaBoard
[    0.000000] Reserving 50331648 bytes SDRAM for VRAM
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] OMAP4430 ES2.0
[    0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xd000
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1fd5000 s12736 r8192 614
....

** Changed in: u-boot-linaro
     Assignee: (unassigned) => John Rigby (jcrigby)

-- 
You received this bug notification because you are a member of Linaro
Maintainers, which is the registrant for Linaro U-Boot.
https://bugs.launchpad.net/bugs/901577

Title:
  U-Boot SPL 2011.09 does not boot on Pandaboard EA1

Status in Linaro Ubuntu Evaluation Builds:
  New
Status in Linaro U-Boot:
  New
Status in “u-boot-linaro” package in Ubuntu:
  New

Bug description:
  I have Pandaboard EA1 which was running fine with older Linaro images.
  Today I booted it with fresh image (after some time of offline) and
  got this:

  U-Boot SPL 2011.09 (Nov 22 2011 - 20:54:48)
  Texas Instruments OMAP4430 ES2.0
  SDRAM: identified size not same as expected size identified: 0 expected: 40000000

  Board hang.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linaro-ubuntu/+bug/901577/+subscriptions