linux-traipu team mailing list archive

[stlubuntu <813273@xxxxxxxxxxxxxxxxxx>]

Public bug reported:

Purchased an HP USB infrared receiver to go with the mceusb2 remote
transmitter that came with my HVR-2250 kit but it shows nothing when
executed irw from the command line.  Mceusb (all) was selected at lirc
setup.

I am running a FE/BE dedicated machine with a dual core AMD Athlon II
2.5 Ghz CPU, Nvidia 6200 chipset, dedicated Nvidia GT220 HDMI 1 GB
graphics card, 2GB RAM, Dual SATA HD, 1 160 GB, 1 TB drive, smaller
drive for OS, database, and video storage partition and the larger drive
solely for video storage. The tuner card is a Hauppage HVR-2250 (dual
HD/ATSC tuner.) This box runs Mythbuntu 10.04 (32-bit) with 0.24-fixes
all updated including lirc-0.8.6.

lsusb shows:

Bus 002 Device 004: ID 1934:5168  where research indicates that  1934 is
the vendor ID for:  FINTEK.

Checking the source this device does not show up in lirc_mceusb.c

So I added this deivce to lirc_mceusb.c by added the following lines:

        /* Fintek HP Branded USB receiver */
        { USB_DEVICE(VENDOR_FINTEK, 0x5168) },

was added to section:      static struct usb_device_id
mceusb_dev_table[] = {

and 
        { USB_DEVICE(VENDOR_FINTEK, 0x5168) },

was added to section     static struct usb_device_id
transmitter_mask_list[] = {

once I got those additions made I did a

sudo dpkg-reconfigure lirc-modules-source followed by a reboot and then
the device worked!

This bug report is my attempt to get this upstream to lirc and mythbuntu
so this device might work OOTB for others.

Attached is the revised lirc_mceusb.c along with a photo of the HP
branded remote infrared usb receiver.

I hope that this is helpful.

** Affects: lirc
     Importance: Undecided
         Status: New

** Affects: mythbuntu
     Importance: Undecided
         Status: New


** Tags: hp infrared lucid mceusb receiver remote usb

-- 
You received this bug notification because you are a member of UBUNTU -
AL - BR, which is subscribed to Mythbuntu.
https://bugs.launchpad.net/bugs/813273

Title:
  FINTEK USB remote receiver not recognized by lirc-0.8.6 on mythbuntu
  lucid

Status in LIRC - Linux Infrared Remote Control:
  New
Status in Mythbuntu, Ubuntu derivative focused upon MythTV:
  New

Bug description:
  Purchased an HP USB infrared receiver to go with the mceusb2 remote
  transmitter that came with my HVR-2250 kit but it shows nothing when
  executed irw from the command line.  Mceusb (all) was selected at lirc
  setup.

  I am running a FE/BE dedicated machine with a dual core AMD Athlon II
  2.5 Ghz CPU, Nvidia 6200 chipset, dedicated Nvidia GT220 HDMI 1 GB
  graphics card, 2GB RAM, Dual SATA HD, 1 160 GB, 1 TB drive, smaller
  drive for OS, database, and video storage partition and the larger
  drive solely for video storage. The tuner card is a Hauppage HVR-2250
  (dual HD/ATSC tuner.) This box runs Mythbuntu 10.04 (32-bit) with
  0.24-fixes all updated including lirc-0.8.6.

  lsusb shows:

  Bus 002 Device 004: ID 1934:5168  where research indicates that  1934
  is the vendor ID for:  FINTEK.

  Checking the source this device does not show up in lirc_mceusb.c

  So I added this deivce to lirc_mceusb.c by added the following lines:

          /* Fintek HP Branded USB receiver */
          { USB_DEVICE(VENDOR_FINTEK, 0x5168) },

  was added to section:      static struct usb_device_id
  mceusb_dev_table[] = {

  and 
          { USB_DEVICE(VENDOR_FINTEK, 0x5168) },

  was added to section     static struct usb_device_id
  transmitter_mask_list[] = {

  once I got those additions made I did a

  sudo dpkg-reconfigure lirc-modules-source followed by a reboot and
  then the device worked!

  This bug report is my attempt to get this upstream to lirc and
  mythbuntu so this device might work OOTB for others.

  Attached is the revised lirc_mceusb.c along with a photo of the HP
  branded remote infrared usb receiver.

  I hope that this is helpful.

To manage notifications about this bug go to:
https://bugs.launchpad.net/lirc/+bug/813273/+subscriptions