linuxdcpp-team team mailing list archive

[zaa <terminator_terminatoru@xxxxxxxxx>]

Public bug reported:

I created a hubdc witch adch++ 2.81 on linux

I tried it in our university campus where we have  NAT ( IPs 192.168.0.1/255) passive 
mode is the only option.
After some checking I saw this
http://www.brynosaurus.com/pub/net/p2pnat/img9.png 
I am in this situation and works well

But the next situation does not work

http://www.brynosaurus.com/pub/net/p2pnat/img8.png 
what settings should be made ​​to work?
something can be done to work ?

my email address is terminator_terminatoru@xxxxxxxxx
Send me an email pls

some information : http://www.brynosaurus.com/pub/net/p2pnat/

excuse me but my English is not very good

hub isn't on the private network, is on internet is have an ip
86.123.234.248

are 2 university campus, each having a server used as rooter for the
private network inside each campus (IP 192.168.0.1/255)

server ip university campuses are 193.231.40.44/45
passive mode is the only option to connect to the hub and to download from other users outside the campus
users on the private network within a campus can not downlad each other using passive mode
hub is made just for the two campuses
passive mode and NAT traversal allows users to connect from one campus to campus but not inside two private networks within campuses

mode active allows connecting users within the private network on campus
1 and not allow users to connect to the campus 2

http://img109.imageshack.us/img109/9308/63413713.png
Green Line allows connection
The red line does not allow connection

pls contact me with a solution

** Affects: dcplusplus
     Importance: Undecided
         Status: New

-- 
You received this bug notification because you are a member of
Dcplusplus-team, which is subscribed to DC++.
https://bugs.launchpad.net/bugs/1067795

Title:
  I use adch + + and I have a connection problem with adc protocol

Status in DC++:
  New

Bug description:
  I created a hubdc witch adch++ 2.81 on linux

  I tried it in our university campus where we have  NAT ( IPs 192.168.0.1/255) passive 
  mode is the only option.
  After some checking I saw this
  http://www.brynosaurus.com/pub/net/p2pnat/img9.png 
  I am in this situation and works well

  But the next situation does not work

  http://www.brynosaurus.com/pub/net/p2pnat/img8.png 
  what settings should be made ​​to work?
  something can be done to work ?

  my email address is terminator_terminatoru@xxxxxxxxx
  Send me an email pls

  some information : http://www.brynosaurus.com/pub/net/p2pnat/

  excuse me but my English is not very good

  hub isn't on the private network, is on internet is have an ip
  86.123.234.248

  are 2 university campus, each having a server used as rooter for the
  private network inside each campus (IP 192.168.0.1/255)

  server ip university campuses are 193.231.40.44/45
  passive mode is the only option to connect to the hub and to download from other users outside the campus
  users on the private network within a campus can not downlad each other using passive mode
  hub is made just for the two campuses
  passive mode and NAT traversal allows users to connect from one campus to campus but not inside two private networks within campuses

  mode active allows connecting users within the private network on
  campus 1 and not allow users to connect to the campus 2

  http://img109.imageshack.us/img109/9308/63413713.png
  Green Line allows connection
  The red line does not allow connection

  pls contact me with a solution

To manage notifications about this bug go to:
https://bugs.launchpad.net/dcplusplus/+bug/1067795/+subscriptions