← Back to team overview

maria-discuss team mailing list archive

Re: Semi-sync replication hangs when changing binlog filename.

 

I have created a gist with as much information as I could including the server configs: https://gist.github.com/josephglanville/4337240e648e77ce7020ebaa1fb8d6b0

This time I uploaded all of the binlog and relay files from both the master and the slave as I don't really know what I am looking for in them.

Ignore the `read_only` variable, it's switched to read write dynamically, report_host is also empty but this doesn't seem to have any effect anyways.

I have updated to to report the actual IP address for the machine correctly however.

I reduced the binlog size to make the issue faster to reproduce (and make the binlogs a bit smaller for ease of uploading).


Basic steps to reproduce is to:


Create the initial master database.

Seed the slave using xtrabackup.

Update slave GTID position using information returned from xtrabackup

Connect the slave using GTID

Insert some data, check that data is replicating correctly to slave.

Keep inserting data until binlog rolls over.

Note that inserts now hang on waiting for slave ack.


Happy to help anyone with further information on how to reproduce.


Joseph.

________________________________
From: Pavel Ivanov <pivanof@xxxxxxxxxx>
Sent: Saturday, 30 July 2016 9:07:54 AM
To: Joseph Glanville
Cc: Justin Swanhart; maria-discuss@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Maria-discuss] Semi-sync replication hangs when changing binlog filename.

All the status variables look sane. But you've uploaded empty binlogs, there's no transaction that is hung in them. So I'd guess it should be in mariadb-bin.000004 (or an earlier file) on master and either it doesn't exist on slave or it's in mariadb-bin.000001 and relay-bin.000004 (or in earlier relay-bin.* file).

On Fri, Jul 29, 2016 at 1:29 AM, Joseph Glanville <jpg@xxxxxxxxx<mailto:jpg@xxxxxxxxx>> wrote:

Hi Justin,


Adjusting the timeout doesn't seem to have any effect. Though setting it low enough does cause the master to time out waiting for the slave to acknowledge the write and falls back to async only to immediately re-establish semi-sync replication. It does this every time the master begins writing to a new binlog.


Joseph.

________________________________
From: Justin Swanhart <greenlion@xxxxxxxxx<mailto:greenlion@xxxxxxxxx>>
Sent: Friday, 29 July 2016 6:17:28 PM
To: Joseph Glanville
Cc: Pavel Ivanov; maria-discuss@xxxxxxxxxxxxxxxxxxx<mailto:maria-discuss@xxxxxxxxxxxxxxxxxxx>

Subject: Re: [Maria-discuss] Semi-sync replication hangs when changing binlog filename.

Hi,

Does the problem appear if you set the timeout value to 9223372036854775807?


On Fri, Jul 29, 2016 at 3:24 AM, Joseph Glanville <jpg@xxxxxxxxx<mailto:jpg@xxxxxxxxx>> wrote:

Hi Pavel.


To describe the setup a little better the master replicates to a semi-sync slave, which then replicates to an async slave. This is to ensure at any point in time both the master and the semi-sync slave have a complete copy of the data. If the master fails the semi-sync is automatically promoted to master and the async switches to replicating with semi-sync replication. If the semi-sync fails then the async remasters itself to the master and switches to semi-sync.


However I don't think the 3rd node has any bearing on the hang, I built a test cluster without it and the hang is still easy to reproduce. I just restore a decent sized dump, in this case a portion of the Wikipedia database and the cluster reliably hangs when the master begins writing to the new binlog.

The dump is here if someone wants to use it to reproduce: https://dumps.wikimedia.org/enwiki/latest/enwiki-latest-category.sql.gz


I have created a gist with the output of `SHOW STATUS LIKE 'Rpl_semi_sync%s'` on both master and slave of the simplified 2 node setup. I have also included the binlogs of both the master and the slave and the relay log on the slave.

https://gist.github.com/josephglanville/70789bc9c3744090a17070652cded68b


<https://gist.github.com/josephglanville/70789bc9c3744090a17070652cded68b>Let me know if there is any other useful information I can provide.



Joseph.

________________________________
From: Pavel Ivanov <pivanof@xxxxxxxxxx<mailto:pivanof@xxxxxxxxxx>>
Sent: Friday, 29 July 2016 4:31:26 PM
To: Joseph Glanville
Cc: Will Fong; maria-discuss@xxxxxxxxxxxxxxxxxxx<mailto:maria-discuss@xxxxxxxxxxxxxxxxxxx>
Subject: Re: [Maria-discuss] Semi-sync replication hangs when changing binlog filename.

This looks pretty weird. If you don't mind more information would be useful to look at: contents of mariadb-bin.000005 on the master, in particular what GTID and binlog position the transaction waiting for semi-sync ack has (confirm that it's 0-1684280839-156 and ends at offset 329); result of "show status like 'rpl_semi_sync_%'" on both master and slave; contents of relay-bin.000005 and binlog on the slave, in particular did it really execute the transaction that is currently hanging on the master? Out of curiosity: it looks like the slave also acts as a master to someone else. Can you also verify that the transaction hanging now on the master made it to that second-level slave?

But to be honest, I don't quite understand how what you show us could happen, so I'm just asking to look at the info that I would look at if I were investigating such problem.

On Thu, Jul 28, 2016 at 10:52 PM, Joseph Glanville <jpg@xxxxxxxxx<mailto:jpg@xxxxxxxxx>> wrote:

Hi Pavel.

Yes, by “binlog filename changes” I mean the master begins writing to a new binlog file.

Output of all the requested commands are in this gist: https://gist.github.com/josephglanville/7b96c34bb6e79ace33e56627672b98a5

Joseph Glanville
Sent from Polymail<https://polymail.io/?utm_source=polymail&utm_medium=referral&utm_campaign=signature>


On Fri, 29 Jul 2016 at 3:08 PM Pavel Ivanov <Pavel Ivanov <mailto:Pavel+Ivanov+%3Cpivanof@xxxxxxxxxx%3E> > wrote:

By "binlog filename changes" you mean when master starts writing binlogs into a new file? Can you clarify how the replication stalls? What "show processlist" shows at that time on master and on slave? What does "show slave status" show on the slave? On Thu, Jul 28, 2016 at 10:03 PM, Will Fong wrote: > Hi Joseph, > > On Fri, Jul 29, 2016 at 10:11 AM, Joseph Glanville wrote: >> However whenever the binlog filename changes the replication stalls >> indefinitely. > > Interesting! I may have reproduced this, but it was only a quick test. > Let me (or someone else) dig into this more. > > Thanks for reporting this. > -will > > > -- > Will Fong, Senior Support Engineer > MariaDB Corporation > > _______________________________________________ > Mailing list: https://launchpad.net/~maria-discuss > Post to : maria-discuss@xxxxxxxxxxxxxxxxxxx<mailto:maria-discuss@xxxxxxxxxxxxxxxxxxx> > Unsubscribe : https://launchpad.net/~maria-discuss > More help : https://help.launchpad.net/ListHelp



_______________________________________________
Mailing list: https://launchpad.net/~maria-discuss
Post to     : maria-discuss@xxxxxxxxxxxxxxxxxxx<mailto:maria-discuss@xxxxxxxxxxxxxxxxxxx>
Unsubscribe : https://launchpad.net/~maria-discuss
More help   : https://help.launchpad.net/ListHelp




Follow ups

References