me-tv-development team mailing list archive

[mikeys <miketwo@xxxxxxxxxxxxx>]

Michael - Never have done backtrace before. Does it have to be done
right after the segmentation fault? Can you advise how to generate the
backtrace? I have the dbg isntalled, but not sure what to do after
segmentation fault occurs.

Also, are the Me-TV transponders for No. America supposed to be generic?
For example, I see some for Sn Francisco, but not for L.A.?? Could there
be transponders for my area that are not in Me-TV? How can I check
online for a list of transponders in my area? My cable provider Time
Warner employs idiots for customer support who are not willing to help
me. As I said the PCI DVICO card that I have picks up correctly all
encrypted/nonencrypted/analog channels when it runs under Win XP - of
course DVICO has software for that under WIndows, but not under Linux.

The only one signal that Me-tV was able to lock on is something new for
me. Before, I was never able to lock to anything. So, I changed to the
latest Me-TV version. Still, please help me find a solution for this
issue. Canonical does not care. DVICO does not care.

No over the air signal (antenna), only cable connection to PCI card. 
Thank you so much for your help.

-- 
me-tv segmentation fault
https://bugs.launchpad.net/bugs/267034
You received this bug notification because you are a member of Me TV
Development, which is subscribed to Me TV.

Status in Me TV, it's TV for me computer: Incomplete

Bug description:
Me-tv does not give me option to scan again for channels. There is nothing in the config. file. Have hardy x64. 'xine-dvb//' says there is no dvb plugin for xine - not sure how important this is. My totem works with xine OK. Have PCI card: DVICO Fusion HDTV RT 5 Gold, which works OK under WIndows XP, but I still cannot make it work (find channels to play) under Hardy x64. Please help. Here is as much as I can copy of dmesg.  What follows after that is re me-tv segmentation fault.

[   34.019390] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[   34.019463] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[   34.019534] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[   34.019604] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[   34.019675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[   34.019745] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[   34.019814] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[   34.019884] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[   34.019985] Linux Plug and Play Support v0.97 (c) Adam Belay
[   34.020011] pnp: PnP ACPI init
[   34.020017] ACPI: bus type pnp registered
[   34.022134] pnp: PnP ACPI: found 12 devices
[   34.022136] ACPI: ACPI bus type pnp unregistered
[   34.022371] PCI: Using ACPI for IRQ routing
[   34.022373] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   34.087719] NET: Registered protocol family 8
[   34.087722] NET: Registered protocol family 20
[   34.087757] NetLabel: Initializing
[   34.087758] NetLabel:  domain hash size = 128
[   34.087760] NetLabel:  protocols = UNLABELED CIPSOv4
[   34.087773] NetLabel:  unlabeled traffic allowed by default
[   34.087783] PCI-GART: No AMD northbridge found.
[   34.087819] AppArmor: AppArmor Filesystem Enabled
[   34.097250] Time: tsc clocksource has been installed.
[   34.117289] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[   34.117292] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[   34.117295] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[   34.117298] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[   34.117301] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[   34.117303] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   34.117306] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[   34.117311] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[   34.117313] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[   34.117316] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[   34.117324] system 00:06: ioport range 0x500-0x53f has been reserved
[   34.117326] system 00:06: ioport range 0x400-0x47f has been reserved
[   34.117329] system 00:06: ioport range 0x680-0x6ff has been reserved
[   34.117740] PCI: Bridge: 0000:00:01.0
[   34.117742]   IO window: 3000-3fff
[   34.117744]   MEM window: e3400000-e34fffff
[   34.117747]   PREFETCH window: d0000000-dfffffff
[   34.117749] PCI: Bridge: 0000:00:1c.0
[   34.117750]   IO window: disabled.
[   34.117754]   MEM window: disabled.
[   34.117756]   PREFETCH window: disabled.
[   34.117760] PCI: Bridge: 0000:00:1c.4
[   34.117762]   IO window: 2000-2fff
[   34.117765]   MEM window: e3300000-e33fffff
[   34.117768]   PREFETCH window: e3600000-e36fffff
[   34.117772] PCI: Bridge: 0000:00:1c.5
[   34.117774]   IO window: 1000-1fff
[   34.117777]   MEM window: e3200000-e32fffff
[   34.117780]   PREFETCH window: disabled.
[   34.117784] PCI: Bridge: 0000:05:00.0
[   34.117785]   IO window: disabled.
[   34.117790]   MEM window: e3000000-e30fffff
[   34.117793]   PREFETCH window: disabled.
[   34.117797] PCI: Bridge: 0000:00:1e.0
[   34.117798]   IO window: disabled.
[   34.117801]   MEM window: e0000000-e31fffff
[   34.117804]   PREFETCH window: disabled.
[   34.117815] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   34.117819] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   34.117834] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[   34.117838] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   34.117851] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[   34.117855] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   34.117869] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[   34.117873] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   34.117881] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   34.117898] NET: Registered protocol family 2
[   34.227476] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   34.228573] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[   34.234137] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   34.234843] TCP: Hash tables configured (established 524288 bind 65536)
[   34.234845] TCP reno registered
[   34.257432] checking if image is initramfs... it is
[   34.616918] Switched to high resolution mode on CPU 1
[   34.626498] Switched to high resolution mode on CPU 0
[   34.925479] Freeing initrd memory: 7588k freed
[   34.929205] audit: initializing netlink socket (disabled)
[   34.929218] audit(1220686340.790:1): initialized
[   34.929629] Total HugeTLB memory allocated, 0
[   34.931274] VFS: Disk quotas dquot_6.5.1
[   34.931333] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   34.931484] io scheduler noop registered
[   34.931486] io scheduler anticipatory registered
[   34.931488] io scheduler deadline registered (default)
[   34.931581] io scheduler cfq registered
[   34.932658] Boot video device is 0000:01:00.0
[   34.935151] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   34.935178] assign_interrupt_mode Found MSI capability
[   34.935201] Allocate Port Service[0000:00:01.0:pcie00]
[   34.935263] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   34.935295] assign_interrupt_mode Found MSI capability
[   34.935322] Allocate Port Service[0000:00:1c.0:pcie00]
[   34.935350] Allocate Port Service[0000:00:1c.0:pcie02]
[   34.935417] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   34.935450] assign_interrupt_mode Found MSI capability
[   34.935477] Allocate Port Service[0000:00:1c.4:pcie00]
[   34.935511] Allocate Port Service[0000:00:1c.4:pcie02]
[   34.935585] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   34.935618] assign_interrupt_mode Found MSI capability
[   34.935645] Allocate Port Service[0000:00:1c.5:pcie00]
[   34.935671] Allocate Port Service[0000:00:1c.5:pcie02]
[   34.956028] Real Time Clock Driver v1.12ac
[   34.956116] Linux agpgart interface v0.102
[   34.956118] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   34.956242] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   34.956806] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   34.957548] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   34.957602] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   34.957677] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[   34.957678] PNP: PS/2 controller doesn't have KBD irq; using default 1
[   34.960575] serio: i8042 KBD port at 0x60,0x64 irq 1
[   34.960579] serio: i8042 AUX port at 0x60,0x64 irq 12
[   35.026717] mice: PS/2 mouse device common for all mice
[   35.026760] cpuidle: using governor ladder
[   35.026762] cpuidle: using governor menu
[   35.026905] NET: Registered protocol family 1
[   35.026987] registered taskstats version 1
[   35.027111]   Magic number: 8:685:520
[   35.027203] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   35.027206] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[   35.027376] Freeing unused kernel memory: 328k freed
[   36.178252] fuse init (API version 7.9)
[   36.190946] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   36.190956] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   36.476621] usbcore: registered new interface driver usbfs
[   36.476641] usbcore: registered new interface driver hub
[   36.478582] SCSI subsystem initialized
[   36.482539] usbcore: registered new device driver usb
[   36.483892] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[   36.483894] Copyright (c) 1999-2006 Intel Corporation.
[   36.483943] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   36.483955] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   36.486155] libata version 3.00 loaded.
[   36.490575] USB Universal Host Controller Interface driver v3.0
[   36.494630] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   36.544913] Floppy drive(s): fd0 is 1.44M
[   36.565881] FDC 0 is a post-1991 82077
[   36.566039] e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:26:67:7b
[   36.647561] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   36.647719] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   36.647747] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   36.648532] scsi0 : pata_marvell
[   36.649262] scsi1 : pata_marvell
[   36.649284] ata1: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 16
[   36.649286] ata2: PATA max UDMA/133 cmd 0x2010 ctl 0x2020 bmdma 0x2008 irq 16
[   36.649728] BAR5:00:04 01:7F 02:22 03:C8 04:02 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00 
[   36.813926] BAR5:00:04 01:7F 02:22 03:C8 04:02 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00 
[   36.983821] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 18 (level, low) -> IRQ 18
[   37.033872] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[e3104000-e31047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   37.038340] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   37.038344] ACPI: PCI Interrupt 0000:06:0c.0[A] -> GSI 21 (level, low) -> IRQ 21
[   37.038370] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   37.038380] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   37.038406] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[   37.038422] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   37.038430] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[   37.088368] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[e3006000-e30067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   37.088483] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 21 (level, low) -> IRQ 21
[   37.088900] ohci_hcd 0000:06:08.0: OHCI Host Controller
[   37.089099] ohci_hcd 0000:06:08.0: new USB bus registered, assigned bus number 1
[   37.089112] ohci_hcd 0000:06:08.0: irq 21, io mem 0xe3005000
[   37.089142] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[   37.089151] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   37.089153] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   37.089170] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   37.089192] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[   37.089294] usb usb2: configuration #1 chosen from 1 choice
[   37.089312] hub 2-0:1.0: USB hub found
[   37.089317] hub 2-0:1.0: 2 ports detected
[   37.192207] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[   37.192217] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   37.192219] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   37.192239] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   37.192264] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[   37.192349] usb usb3: configuration #1 chosen from 1 choice
[   37.192366] hub 3-0:1.0: USB hub found
[   37.192371] hub 3-0:1.0: 2 ports detected
[   37.301935] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   37.301941] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   37.301943] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   37.301960] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[   37.301982] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[   37.302060] usb usb4: configuration #1 chosen from 1 choice
[   37.302077] hub 4-0:1.0: USB hub found
[   37.302081] hub 4-0:1.0: 2 ports detected
[   37.411730] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   37.411736] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   37.411738] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   37.411754] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[   37.411774] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[   37.411851] usb usb5: configuration #1 chosen from 1 choice
[   37.411869] hub 5-0:1.0: USB hub found
[   37.411874] hub 5-0:1.0: 2 ports detected
[   37.471530] usb 2-1: new low speed USB device using uhci_hcd and address 2
[   37.521891] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[   37.522303] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   37.522308] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   37.522353] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
[   37.526251] ehci_hcd 0000:00:1d.7: debug port 1
[   37.526256] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   37.526261] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe3504400
[   37.611241] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   37.611325] usb usb6: configuration #1 chosen from 1 choice
[   37.611348] hub 6-0:1.0: USB hub found
[   37.611353] hub 6-0:1.0: 8 ports detected
[   37.721209] usb usb1: configuration #1 chosen from 1 choice
[   37.721232] hub 1-0:1.0: USB hub found
[   37.721241] hub 1-0:1.0: 3 ports detected
[   38.009208] usb 2-1: device not accepting address 2, error -71
[   38.240088] ACPI: PCI Interrupt 0000:06:08.1[B] -> GSI 22 (level, low) -> IRQ 22
[   38.240587] ohci_hcd 0000:06:08.1: OHCI Host Controller
[   38.240629] ohci_hcd 0000:06:08.1: new USB bus registered, assigned bus number 7
[   38.240647] ohci_hcd 0000:06:08.1: irq 22, io mem 0xe3004000
[   38.348552] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0090270001bc9f84]
[   38.398490] ieee1394: Host added: ID:BUS[1-00:1023]  GUID[005042b5c00df532]
[   38.808930] usb usb7: configuration #1 chosen from 1 choice
[   38.808950] hub 7-0:1.0: USB hub found
[   38.808959] hub 7-0:1.0: 2 ports detected
[   39.106926] usb 6-3: new high speed USB device using ehci_hcd and address 4
[   39.259216] usb 6-3: configuration #1 chosen from 1 choice
[   39.328369] ACPI: PCI Interrupt 0000:06:08.2[C] -> GSI 23 (level, low) -> IRQ 23
[   39.328798] ehci_hcd 0000:06:08.2: EHCI Host Controller
[   39.328844] ehci_hcd 0000:06:08.2: new USB bus registered, assigned bus number 8
[   39.328884] ehci_hcd 0000:06:08.2: irq 23, io mem 0xe3006800
[   39.347658] ehci_hcd 0000:06:08.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
[   39.347764] usb usb8: configuration #1 chosen from 1 choice
[   39.347785] hub 8-0:1.0: USB hub found
[   39.347791] hub 8-0:1.0: 5 ports detected
[   39.458811] ata_piix 0000:00:1f.1: version 2.12
[   39.458828] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   39.458856] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   39.458908] scsi2 : ata_piix
[   39.458945] scsi3 : ata_piix
[   39.459344] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[   39.459347] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[   39.540407] usb 2-1: new low speed USB device using uhci_hcd and address 4
[   39.720917] usb 2-1: configuration #1 chosen from 1 choice
[   39.995107] usb 2-2: new low speed USB device using uhci_hcd and address 5
[   40.155170] ata3.00: ATAPI: SONY    CD-RW  CRX220E1, 6YS1, max UDMA/33
[   40.155184] ata3.01: ATAPI: ATAPI   DVD A  DH20A4H, QP53, max UDMA/66
[   40.155192] ata3.01: limited to UDMA/33 due to 40-wire cable
[   40.189961] usb 2-2: configuration #1 chosen from 1 choice
[   40.364600] ata3.00: configured for UDMA/33
[   40.564166] ata3.01: configured for UDMA/33
[   40.564205] ata4: port disabled. ignoring.
[   40.568919] scsi 2:0:0:0: CD-ROM            SONY     CD-RW  CRX220E1  6YS1 PQ: 0 ANSI: 5
[   40.570000] scsi 2:0:1:0: CD-ROM            ATAPI    DVD A  DH20A4H   QP53 PQ: 0 ANSI: 5
[   40.570063] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   40.570085] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[   40.570116] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   40.570156] scsi4 : ata_piix
[   40.570198] scsi5 : ata_piix
[   40.570302] ata5: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[   40.570305] ata6: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[   40.793438] usb 8-2: new high speed USB device using ehci_hcd and address 2
[   40.954020] ata6.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
[   40.954023] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   41.045447] ata6.00: configured for UDMA/133
[   41.045561] scsi 5:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
[   41.051508] Driver 'sr' needs updating - please use bus_type methods
[   41.055590] Driver 'sd' needs updating - please use bus_type methods
[   41.087268] usb 8-2: configuration #1 chosen from 1 choice
[   41.125465] sr0: scsi3-mmc drive: 6x/52x writer cd/rw xa/form2 cdda tray
[   41.125470] Uniform CD-ROM driver Revision: 3.20
[   41.125519] sr 2:0:0:0: Attached scsi CD-ROM sr0
[   41.132953] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   41.132994] sr 2:0:1:0: Attached scsi CD-ROM sr1
[   41.133406] sd 5:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   41.137651] sd 5:0:0:0: [sda] Write Protect is off
[   41.137654] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   41.137686] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   41.137728] sd 5:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   41.137736] sd 5:0:0:0: [sda] Write Protect is off
[   41.137737] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   41.137750] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   41.137753]  sda:<5>sr 2:0:0:0: Attached scsi generic sg0 type 5
[   41.137925] sr 2:0:1:0: Attached scsi generic sg1 type 5
[   41.137939] sd 5:0:0:0: Attached scsi generic sg2 type 0
[   41.151518]  sda1 sda2 < sda5 >
[   41.172820] sd 5:0:0:0: [sda] Attached SCSI disk
[   41.362296] usb 8-4: new high speed USB device using ehci_hcd and address 3
[   41.514294] usb 8-4: configuration #1 chosen from 1 choice
[   41.514569] usbcore: registered new interface driver libusual
[   41.514777] usbcore: registered new interface driver hiddev
[   41.518306] Initializing USB Mass Storage driver...
[   41.519156] scsi6 : SCSI emulation for USB Mass Storage devices
[   41.519588] usb-storage: device found at 4
[   41.519590] usb-storage: waiting for device to settle before scanning
[   41.529403] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
[   41.593080] input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-1
[   41.632962] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
[   41.661690] input,hiddev96,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-1
[   42.022141] hiddev97hidraw2: USB HID v1.10 Device [APC Back-UPS ES 450 FW:844.K1d.D USB FW:K1d] on usb-0000:00:1d.0-2
[   42.022162] usbcore: registered new interface driver usbhid
[   42.022166] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   42.022982] scsi7 : SCSI emulation for USB Mass Storage devices
[   42.023034] usbcore: registered new interface driver usb-storage
[   42.023036] USB Mass Storage support registered.
[   42.023112] usb-storage: device found at 3
[   42.023113] usb-storage: waiting for device to settle before scanning
[   45.890785] Attempting manual resume
[   45.890788] swsusp: Resume From Partition 8:5
[   45.890789] PM: Checking swsusp image.
[   45.890953] PM: Resume from disk failed.
[   45.928648] kjournald starting.  Commit interval 5 seconds
[   45.928655] EXT3-fs: mounted filesystem with ordered data mode.
[   46.503294] usb-storage: device scan complete
[   46.503784] scsi 6:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  3.27 PQ: 0 ANSI: 2
[   46.504278] scsi 6:0:0:1: CD-ROM            SanDisk  U3 Cruzer Micro  3.27 PQ: 0 ANSI: 2
[   46.505513] sd 6:0:0:0: [sdb] 8009728 512-byte hardware sectors (4101 MB)
[   46.506137] sd 6:0:0:0: [sdb] Write Protect is off
[   46.506139] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   46.506141] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   46.508756] sd 6:0:0:0: [sdb] 8009728 512-byte hardware sectors (4101 MB)
[   46.509380] sd 6:0:0:0: [sdb] Write Protect is off
[   46.509382] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   46.509384] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   46.509387]  sdb: sdb1
[   46.510304] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   46.510335] sd 6:0:0:0: Attached scsi generic sg3 type 0
[   46.511502] sr2: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[   46.511535] sr 6:0:0:1: Attached scsi CD-ROM sr2
[   46.511564] sr 6:0:0:1: Attached scsi generic sg4 type 5
[   47.011006] usb-storage: device scan complete
[   47.011495] scsi 7:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  4.05 PQ: 0 ANSI: 2
[   47.011991] scsi 7:0:0:1: CD-ROM            SanDisk  U3 Cruzer Micro  4.05 PQ: 0 ANSI: 2
[   47.013224] sd 7:0:0:0: [sdc] 8013453 512-byte hardware sectors (4103 MB)
[   47.013849] sd 7:0:0:0: [sdc] Write Protect is off
[   47.013851] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[   47.013853] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[   47.016467] sd 7:0:0:0: [sdc] 8013453 512-byte hardware sectors (4103 MB)
[   47.017091] sd 7:0:0:0: [sdc] Write Protect is off
[   47.017093] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[   47.017095] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[   47.017098]  sdc: sdc1
[   47.018650] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   47.018681] sd 7:0:0:0: Attached scsi generic sg5 type 0
[   47.022704] sr3: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[   47.022746] sr 7:0:0:1: Attached scsi CD-ROM sr3
[   47.022775] sr 7:0:0:1: Attached scsi generic sg6 type 5
[   52.011576] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   52.111967] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   52.143236] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   52.211815] EDAC MC: Ver: 2.1.0 Aug 20 2008
[   52.256864] parport_pc 00:08: reported by Plug and Play ACPI
[   52.256918] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[   52.266680] input: Power Button (FF) as /devices/virtual/input/input4
[   52.310963] ACPI: Power Button (FF) [PWRF]
[   52.311027] input: Sleep Button (CM) as /devices/virtual/input/input5
[   52.313512] EDAC i82975x: ECC disabled on both channels.
[   52.380759] ACPI: Sleep Button (CM) [SLPB]
[   52.571068] Linux video capture interface: v2.00
[   52.859829] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[   52.859881] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[   52.859910] cx88[0]: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold [card=31,autodetected]
[   52.859912] cx88[0]: TV tuner type 64, Radio tuner type -1
[   52.869779] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[   52.908367] logips2pp: Detected unknown logitech mouse model 74
[   53.027321] cx88[0]/0: found at 0000:05:02.0, rev: 5, irq: 18, latency: 32, mmio: 0xe2000000
[   53.265317] tuner 0-0043: chip found @ 0x86 (cx88[0])
[   53.265337] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
[   53.265339] tuner 0-0043: type set to tda9887
[   53.267822] tuner 0-0061: chip found @ 0xc2 (cx88[0])
[   53.267841] tuner-simple 0-0061: type set to 64 (LG TDVS-H06xF)
[   53.267843] tuner 0-0061: type set to LG TDVS-H06xF
[   53.267846] tuner-simple 0-0061: type set to 64 (LG TDVS-H06xF)
[   53.267847] tuner 0-0061: type set to LG TDVS-H06xF
[   53.280882] cx2388x alsa driver version 0.0.6 loaded
[   53.331336] uvcvideo: Found UVC 1.00 device <unnamed> (046d:08ca)
[   53.374076] usbcore: registered new interface driver uvcvideo
[   53.374080] USB Video Class driver (v0.1.0)
[   53.393795] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input6
[   53.404076] input: i2c IR (FusionHDTV) as /devices/virtual/input/input7
[   53.486859] usbcore: registered new interface driver snd-usb-audio
[   54.027373] ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-0/0-006b/ir0 [cx88[0]]
[   54.060786] isl1208 0-006f: chip found, driver version 0.2
[   54.060822] isl1208 0-006f: rtc core: registered isl1208 as rtc0
[   54.061662] cx88[0]/0: registered device video1 [v4l2]
[   54.061680] cx88[0]/0: registered device vbi0
[   54.064226] cx88[0]/2: cx2388x 8802 Driver Manager
[   54.064246] ACPI: PCI Interrupt 0000:05:02.2[A] -> GSI 18 (level, low) -> IRQ 18
[   54.064254] cx88[0]/2: found at 0000:05:02.2, rev: 5, irq: 18, latency: 32, mmio: 0xe0000000
[   54.064321] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   54.064743] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   54.123688] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[   54.123692] cx88/2: registering cx8802 driver, type: dvb access: shared
[   54.123695] cx88[0]/2: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold [card=31]
[   54.123698] cx88[0]/2: cx2388x based DVB/ATSC card
[   54.500107] DVB: registering new adapter (cx88[0])
[   54.500111] DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
[   54.755997] ACPI: PCI Interrupt 0000:05:02.1[A] -> GSI 18 (level, low) -> IRQ 18
[   54.756024] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[   57.344237] lp0: using parport0 (interrupt-driven).
[   57.411873] Adding 11871992k swap on /dev/sda5.  Priority:-1 extents:1 across:11871992k
[   57.953675] EXT3 FS on sda1, internal journal
[   59.028625] ip_tables: (C) 2000-2006 Netfilter Core Team
[   59.052814] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   59.125517] NET: Registered protocol family 10
[   59.125725] lo: Disabled Privacy Extensions
[   59.135475] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   59.755246] No dock devices found.
[   61.075834] ppdev: user-space parallel port driver
[   61.283831] audit(1220686368.028:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5550 profile="/usr/sbin/cupsd" namespace="default"
[   63.138495] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[   63.138499] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[   64.807226] [drm] Initialized drm 1.1.0 20060810
[   66.269535] NET: Registered protocol family 17
[   81.725141] eth0: no IPv6 routers present
[  385.671373] me-tv[6563]: segfault at 4544a1a3 rip 4147a0 rsp 45443bb0 error 4
[  401.385169] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[  419.617771] compat_ioctl32: v4l2 ioctl VIDIOC_S_PARM, dir=rw (0xc0cc5616)
[  419.617782] ioctl32(skype:6571): Unknown cmd fd(29) cmd(c0cc5616){t:'V';sz:204} arg(f635fda0) on /dev/video0
[  827.023694] me-tv[6746]: segfault at 44b8b6db rip 4147a0 rsp 44b84bb0 error 4
[ 1240.415183] me-tv[8013]: segfault at 45117000 rip 4147c2 rsp 45110bb0 error 4
[ 1746.604854] me-tv[8099]: segfault at 449e8839 rip 4147a0 rsp 449e1bb0 error 4


mikeys@mikeys-desktop:~$ sudo me-tv
Me TV-Message: 09/06/2008 01:00:20 - Me TV Version: 0.5.30
Me TV-Message: 09/06/2008 01:00:20 - Loading glade file '/usr/share/me-tv/glade/me-tv.glade'
Me TV-Message: 09/06/2008 01:00:21 - Creating EPG file at '/root/.me-tv/epg.xml'
Me TV-Message: 09/06/2008 01:00:21 - EPG file loaded
Me TV-Message: 09/06/2008 01:00:21 - Channel file loaded
Me TV-Message: 09/06/2008 01:00:21 - Using 'xine' engine
Me TV-Message: 09/06/2008 01:00:22 - Request to change channel to '[00d9] #1'
Me TV-Message: 09/06/2008 01:00:22 - Changing channel to '[00d9] #1'
Me TV-Message: 09/06/2008 01:00:22 - Purging remaining EPG events
Me TV-Message: 09/06/2008 01:00:22 - EPG events purged
Me TV-Message: 09/06/2008 01:00:22 - Tuning to transponder at 99000000 ...
Me TV-Message: 09/06/2008 01:00:22 - Waiting for signal lock ...
Me TV-Message: 09/06/2008 01:00:22 - Got signal lock
Me TV-Message: 09/06/2008 01:00:22 - Tuned to transponder at 99000000
Me TV-Message: 09/06/2008 01:00:22 - Streamer starting
Me TV-Message: 09/06/2008 01:00:22 - Video thread created
Me TV-Message: 09/06/2008 01:00:22 - About to open FIFO 'fifo://root/.me-tv/video.fifo' ...
Me TV-Message: 09/06/2008 01:00:22 - Stream thread created
Me TV-Message: 09/06/2008 01:00:22 - Trying to auto detect PIDs
Me TV-Message: 09/06/2008 01:00:22 - EPG thread created
Me TV-Message: 09/06/2008 01:00:22 - Channel changed to '[00d9] #1'
Me TV-Message: 09/06/2008 01:00:22 - Found 12 associations
Me TV-Message: 09/06/2008 01:00:22 - AC3 PID: 2688
Me TV-Message: 09/06/2008 01:00:22 - AC3 PID: 2689
Me TV-Message: 09/06/2008 01:00:22 - Setting AC3 PID filter to 2688 (0xA80)
Me TV-Message: 09/06/2008 01:00:22 - Setting AC3 PID filter to 2689 (0xA81)
Me TV-Message: 09/06/2008 01:00:22 - PIDs read successfully
Me TV-Message: 09/06/2008 01:00:23 - About to play from FIFO ...
Me TV-Message: 09/06/2008 01:00:23 - Playing from FIFO
Me TV-Message: Exception message: 'Timeout while polling for demuxer'
Me TV-Message: 09/06/2008 01:00:27 - Timeout in EPG thread: Timeout while polling for demuxer
Me TV-Message: 09/06/2008 01:00:27 - Exiting EPG thread
Me TV-Message: 09/06/2008 01:00:44 - Starting auto surf
Me TV-Message: 09/06/2008 01:00:45 - Request to change channel to '[00d9] #1'
Me TV-Message: 09/06/2008 01:00:45 - Already tuned to '[00d9] #1'
Me TV-Message: 09/06/2008 01:00:56 - Request to change channel to '[00da]'
Me TV-Message: 09/06/2008 01:00:56 - Changing channel to '[00da]'
Me TV-Message: 09/06/2008 01:00:56 - Stream thread stopped
Me TV-Message: 09/06/2008 01:00:56 - Purging remaining EPG events
Me TV-Message: 09/06/2008 01:00:56 - EPG events purged
Me TV-Message: 09/06/2008 01:00:56 - Tuning to transponder at 99000000 ...
Me TV-Message: 09/06/2008 01:00:56 - Waiting for signal lock ...
Me TV-Message: 09/06/2008 01:00:56 - Got signal lock
Me TV-Message: 09/06/2008 01:00:56 - Tuned to transponder at 99000000
Me TV-Message: 09/06/2008 01:00:56 - Streamer starting
Me TV-Message: 09/06/2008 01:00:56 - Video thread created
Me TV-Message: 09/06/2008 01:00:56 - About to open FIFO 'fifo://root/.me-tv/video.fifo' ...
Me TV-Message: 09/06/2008 01:00:56 - Stream thread created
Me TV-Message: 09/06/2008 01:00:56 - Trying to auto detect PIDs
Me TV-Message: 09/06/2008 01:00:56 - EPG thread created
Me TV-Message: 09/06/2008 01:00:56 - Channel changed to '[00da]'
Me TV-Message: 09/06/2008 01:00:56 - Found 12 associations
Segmentation fault