← Back to team overview

mudlet-makers team mailing list archive

[Bug 1676946] [NEW] Crash when timer initiated from sysDisconnectEvent

 

Public bug reported:

Sample code:

function autoCrash()
  tempTimer(5,[[echo("This will crash 5 seconds after mudlet profile is closed")]])
--  tempTimer(5,[[send("This will crash 5 seconds after mudlet profile is closed")]]) -- only when send output is set to 'on' in settings
--  tempTimer(5,[[reconnect()]]) -- this will crash mudlet 5 seconds after profile is closed
end
registerAnonymousEventHandler("sysDisconnectionEvent","autoCrash")

Explanation:

Any output to the profile's window after it has been closed will crash
mudlet. ANY output at all - Any function that will output anything,
including reconnect(), echo() send() [send only when the 'show text sent
to MUD'], etc.

The only way this can happen is via the sysDisconnectEvent and a
tempTimer or by enableTimer() on a timer that will output something.
Otherwise, all timers (temp and permanent) are disabled at profile
close.

The culprit appears to be that sysDisconnectEvent is called, whether the
profile is connected or disconnected, at the close of the profile. This
is probably to terminate any open connections to the MUD. However, it is
being called after all timers have been disabled. If you try this same
tempTimer in an alias, then close the profile before it fires, you will
have no crash.

--Mudlet 3.0.0
--Windows 10

** Affects: mudlet
     Importance: Undecided
         Status: New

** Description changed:

  Sample code:
  
  function autoCrash()
-   tempTimer(5,[[echo("This will crash 5 seconds after mudlet is disconnected")]])
+   tempTimer(5,[[echo("This will crash 5 seconds after mudlet profile is closed")]])
+ --  tempTimer(5,[[send("This will crash 5 seconds after mudlet profile is closed")]]) -- only when send output is set to 'on' in settings
+ --  tempTimer(5,[[reconnect()]]) -- this will crash mudlet 5 seconds after profile is closed
  end
  registerAnonymousEventHandler("sysDisconnectionEvent","autoCrash")
  
  Explanation:
  
  Any output to the profile's window after it has been closed will crash
- mudlet. The only way this can happen is via the sysDisconnectEvent and a
+ mudlet. ANY output at all - Any function that will output anything,
+ including reconnect(), echo() send() [send only when the 'show text sent
+ to MUD'], etc.
+ 
+ The only way this can happen is via the sysDisconnectEvent and a
  tempTimer or by enableTimer() on a timer that will output something.
  Otherwise, all timers (temp and permanent) are disabled at profile
  close.
  
  The culprit appears to be that sysDisconnectEvent is called, whether the
  profile is connected or disconnected, at the close of the profile. This
  is probably to terminate any open connections to the MUD. However, it is
  being called after all timers have been disabled. If you try this same
  tempTimer in an alias, then close the profile before it fires, you will
  have no crash.
  
  --Mudlet 3.0.0
  --Windows 10

-- 
You received this bug notification because you are a member of Mudlet
Makers, which is subscribed to Mudlet.
https://bugs.launchpad.net/bugs/1676946

Title:
  Crash when timer initiated from sysDisconnectEvent

Status in Mudlet:
  New

Bug description:
  Sample code:

  function autoCrash()
    tempTimer(5,[[echo("This will crash 5 seconds after mudlet profile is closed")]])
  --  tempTimer(5,[[send("This will crash 5 seconds after mudlet profile is closed")]]) -- only when send output is set to 'on' in settings
  --  tempTimer(5,[[reconnect()]]) -- this will crash mudlet 5 seconds after profile is closed
  end
  registerAnonymousEventHandler("sysDisconnectionEvent","autoCrash")

  Explanation:

  Any output to the profile's window after it has been closed will crash
  mudlet. ANY output at all - Any function that will output anything,
  including reconnect(), echo() send() [send only when the 'show text
  sent to MUD'], etc.

  The only way this can happen is via the sysDisconnectEvent and a
  tempTimer or by enableTimer() on a timer that will output something.
  Otherwise, all timers (temp and permanent) are disabled at profile
  close.

  The culprit appears to be that sysDisconnectEvent is called, whether
  the profile is connected or disconnected, at the close of the profile.
  This is probably to terminate any open connections to the MUD.
  However, it is being called after all timers have been disabled. If
  you try this same tempTimer in an alias, then close the profile before
  it fires, you will have no crash.

  --Mudlet 3.0.0
  --Windows 10

To manage notifications about this bug go to:
https://bugs.launchpad.net/mudlet/+bug/1676946/+subscriptions


Follow ups