mythbuntu-bugs team mailing list archive
-
mythbuntu-bugs team
-
Mailing list archive
-
Message #01644
[Bug 566422] [NEW] ID 1784:0011 TopSeed USB IR receiver no longer works in 10.04
Public bug reported:
Binary package hint: lirc
Hello, I have a MCE Rosewill remote/USB IR receiver combo found here:
http://www.newegg.com/Product/Product.aspx?Item=N82E16880101003
The first button press from the remote causes the receiver light to stay
lit, instead of blinking as under normal operation, and no input is
received.
Under Mythbunut 9.10, this combo experienced the same symptoms, but
worked flawlessly after modifying
/usr/src/lirc-0.8.6/drivers/lirc_mceusb/lirc_mceusb.c and adding:
static struct usb_device_id mceusb_dev_table[] = {
/* Topseed eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_TOPSEED, 0x0011) },
and
static struct usb_device_id transmitter_mask_list[] = {
{ USB_DEVICE(VENDOR_TOPSEED, 0x0011) },
and then running: sudo dpkg-reconfigure lirc-modules-source
more details found here: http://forum.xbmc.org/showthread.php?t=66527
Upon upgrading to 10.04, the machine using this combo experienced the
original symptoms (light staying lit and no input received). These
symptoms persist even after following the exact same procedure that
allowed the combo to work in 9.10.
=============================================================================================
:~$ lsb_release -rd
Description: Ubuntu lucid (development branch)
Release: 10.04
:~$ uname -r
2.6.31-21-generic
:~$ dpkg -l | grep lirc
ii liblircclient0 0.8.6-0ubuntu4 infra-red remote control support - client li
ii lirc 0.8.6-0ubuntu4 infra-red remote control support
ii lirc-modules-source 0.8.6-0ubuntu4 infra-red remote control support - kernel mo
:~$ sudo lsusb -vv
Bus 003 Device 002: ID 1784:0011 TopSeed Technology Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1784 TopSeed Technology Corp.
idProduct 0x0011
bcdDevice 1.00
iManufacturer 1 Topseed Technology Corp.
iProduct 2 eHome Infrared Transceiver
iSerial 3 EID0137AG-8-0000001417
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
** Affects: lirc (Ubuntu)
Importance: Undecided
Status: New
--
ID 1784:0011 TopSeed USB IR receiver no longer works in 10.04
https://bugs.launchpad.net/bugs/566422
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to lirc in ubuntu.
Status in “lirc” package in Ubuntu: New
Bug description:
Binary package hint: lirc
Hello, I have a MCE Rosewill remote/USB IR receiver combo found here: http://www.newegg.com/Product/Product.aspx?Item=N82E16880101003
The first button press from the remote causes the receiver light to stay lit, instead of blinking as under normal operation, and no input is received.
Under Mythbunut 9.10, this combo experienced the same symptoms, but worked flawlessly after modifying /usr/src/lirc-0.8.6/drivers/lirc_mceusb/lirc_mceusb.c and adding:
static struct usb_device_id mceusb_dev_table[] = {
/* Topseed eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_TOPSEED, 0x0011) },
and
static struct usb_device_id transmitter_mask_list[] = {
{ USB_DEVICE(VENDOR_TOPSEED, 0x0011) },
and then running: sudo dpkg-reconfigure lirc-modules-source
more details found here: http://forum.xbmc.org/showthread.php?t=66527
Upon upgrading to 10.04, the machine using this combo experienced the original symptoms (light staying lit and no input received). These symptoms persist even after following the exact same procedure that allowed the combo to work in 9.10.
=============================================================================================
:~$ lsb_release -rd
Description: Ubuntu lucid (development branch)
Release: 10.04
:~$ uname -r
2.6.31-21-generic
:~$ dpkg -l | grep lirc
ii liblircclient0 0.8.6-0ubuntu4 infra-red remote control support - client li
ii lirc 0.8.6-0ubuntu4 infra-red remote control support
ii lirc-modules-source 0.8.6-0ubuntu4 infra-red remote control support - kernel mo
:~$ sudo lsusb -vv
Bus 003 Device 002: ID 1784:0011 TopSeed Technology Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1784 TopSeed Technology Corp.
idProduct 0x0011
bcdDevice 1.00
iManufacturer 1 Topseed Technology Corp.
iProduct 2 eHome Infrared Transceiver
iSerial 3 EID0137AG-8-0000001417
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
Follow ups
References
