mythbuntu-bugs team mailing list archive

[Blackpaw <lindsay.mathieson@xxxxxxxxx>]

Paul, one caveat with the firmware - it won't be reloaded onto cards
that are still in a "warm" state and USB cards often retain that status
even after a reboot - if you look at dmesg you can usually see a message
along the lines of "warm state, firmware not uploaded" on some such.

Before chucking the towel in :) I'd recommend installing the *4.95*
firmware, shutting down the PC, unplugging it from the wall and
physically removing the usb tuner. Give it a few minutes, plug the tuner
back in and turn the PC back on.

Review your dmesg output (dmesg|less) and see if you can find mention of
your card - a seach for af90 should find it. See if its uploading the
firmware and what version it is.

Then if it all seems ok, move onto tuning.

Cheers,

Lindsay

-- 
dvb-usb-af9015 should be updated to the latest version to resolve some issues
https://bugs.launchpad.net/bugs/458444
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to linux-firmware-nonfree in ubuntu.

Status in “linux-firmware-nonfree” package in Ubuntu: Fix Released

Bug description:
Binary package hint: linux-firmware-nonfree

The firmware that comes for af9015 is not the latest version and it has an issue that blasts dmesg with this two error messages:
af9015: command failed:255
dvb-usb: error while querying for an remote control event.

The latest firmware version 0.95 solves this issue:
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/