| Thread Previous • Date Previous • Date Next • Thread Next |
Hi again I' m still hanging up :) I found reason for errors. I updated from here: https://bugs.launchpad.net/ubuntu/+source/smcroute/+bug/1043688 new smcroute and now scripts run sucessed. I'm glad if you can use your time and check scripts related my ifconfig file because data don't go via emu. Is one reason that opensand_tun and opensand_br interfaces not include multicast broadcast? Commands I were using (ST): sudo iperf -c 239.1.1.1 -u -T 32 -t 30 -i 1 (GW): sudo iperf -s -u -B 239.1.1.1 i 1 BR. Jussi On 5 February 2014 16:06, Fabrice HOBAYA < fabrice.hobaya@xxxxxxxxxxxxxxxxxxxx> wrote: > Hi, > > I think this just because in the scripts you have modified the > IPV4_GW_SUBNET_HOSTS name into emu_ipv4 and the IPV4_STs_SUBNET_HOSTS into > lan_ipv4, but you do not have modified the name in the scripts, therefore > smcroute can not create the multicast routes. > > BR, > Fabrice. > > Le 05/02/2014 14:50, Jussi Isokangas a écrit : > > Hi, > Actually I can't find them from /etc/smcroute.conf (should be default > location?). Even in the host machine where i can reinstall it without > errors i can't see any conf files. On this machine I didn't run those > scripts. > > gw@gw-VirtualBox:/etc$ whereis smcroute.conf > smcroute: /usr/sbin/smcroute /etc/smcroute > /usr/share/man/man8/smcroute.8.gz > > Enclosed edited scripts > Br. Jussi > > > > > On 5 February 2014 14:51, Fabrice HOBAYA < > fabrice.hobaya@xxxxxxxxxxxxxxxxxxxx> wrote: > >> Hi, >> >> Could you send me your smcroute conf files. >> >> Regarding the warning it does not matter. >> >> BR, >> Fabrice. >> >> Le 05/02/2014 13:47, Jussi Isokangas a écrit : >> >> Thank you! >> You have huge mount of ST! >> After running gonf files I got conflicts on smcroute and can't use it >> even purge and re-install. >> "Segmentation fault (core dumped)" >> and after re install "dpkg erroor: processing smcroute (--configure) >> >> I'm not sure if I have to use names in script included in daemon.conf : >> GW daemon.conf >> emu_ipv4 = 192.168.18.42/24 >> lan_iface = eth1 >> lan_ipv4 = 192.168.42.1/24 >> >> ST: daemon.conf >> Something else >> >> >> >> Is it matter of the warning "plugin AAL5/ATM may be missing" ? >> RG Jussi >> >> >> >> >> >> >> >> >> >> >> On 4 February 2014 18:14, Fabrice HOBAYA < >> fabrice.hobaya@xxxxxxxxxxxxxxxxxxxx> wrote: >> >>> Hi, >>> >>> Regarding IPV4 multicast routing, we have tested the platform with >>> smcroute (http://www.cschill.de/smcroute/) which is not an OpenSAND >>> tool. >>> >>> Attached to this mail, small scripts that gives an example of >>> smcroute configuration. >>> This configuration set: >>> - The ST1 as a multicast router and listener for the multicast group >>> 239.1.1.1 >>> - The GW as a multicast router and listener for the multicast group >>> 239.1.1.1 >>> - The ST3 as a multicast listener for the multicast group 239.1.1.1 >>> >>> On this files you have to check if interface names and subnetwork >>> addresses match your platform. >>> >>> Trick: regarding the multicast ping, don't forget to use the -t option >>> to modify the ttl which is set to 1 by default for multicast addresses. >>> >>> BR, >>> Fabrice. >>> >>> Le 04/02/2014 16:51, Julien BERNARD a écrit : >>> >>> Hi Juss, >>>> >>>>> >>>>> I have trivial question considering send multicast. I expect I' ll >>>>> need install gse-encap plugin to working with Multicast. >>>>> >>>> You don't need to install GSE for multicast, this should work with ATM >>>> and MPEG encapsulations. >>>> Fabrice should sent you some advices for multicast soon. >>>> >>>> I have tested Multicast by Iperf-tool without success. Anyway ping >>>>> works normally. I can't install that plugin trough installation manual I >>>>> got error: >>>>> >>>>> /checking whether gcc needs -traditional... no >>>>> checking for X... no >>>>> checking for $CXX... no >>>>> checking for -c... no >>>>> checking for $CXXFLAGS... no >>>>> checking for $CPPFLAGS... no >>>>> checking for conftest.$ac_ext... no >>>>> checking for >&5... no >>>>> checking for pkg-config... /usr/bin/pkg-config >>>>> checking pkg-config is at least version 0.9.0... yes >>>>> checking for OPENSAND_GSE... no >>>>> checking for OPENSAND_GSE... configure: error: Package requirements >>>>> (gse = 2.0.0) were not met: >>>>> >>>>> No package 'gse' found >>>>> >>>>> Consider adjusting the PKG_CONFIG_PATH environment variable if you >>>>> installed software in a non-standard prefix. >>>>> >>>>> Alternatively, you may set the environment variables >>>>> OPENSAND_GSE_CFLAGS >>>>> and OPENSAND_GSE_LIBS to avoid the need to call pkg-config. >>>>> See the pkg-config man page for more details. >>>>> / >>>>> I have tried many tricks to set environment variables without success. >>>>> >>>>> >>>>> I think you did not installed the GSE package. >>>> To avoid the compilation phase, you can install >>>> libopensand-gse-encap-plugin on daemons and >>>> libopensand-gse-encap-plugin-manager on manager. It is available on our >>>> repository and on launchpad. If you use the package downloaded on launchpad >>>> or if you still want to compile the plugin, install the libgse package >>>> before. It is available on the libgse launchpad page. >>>> >>>> Regards, >>>> >>>> >>> -- >>> Fabrice HOBAYA >>> PhD - Réseaux, Télécommunications, Systèmes et Architectures >>> Ingénieur d'études Viveris Technologies >>> +335 61 00 31 84 >>> fabrice.hobaya@xxxxxxxxxxxxxxxxxxxx >>> >>> >>> -- >>> Mailing list: https://launchpad.net/~opensand >>> Post to : opensand@xxxxxxxxxxxxxxxxxxx >>> Unsubscribe : https://launchpad.net/~opensand >>> More help : https://help.launchpad.net/ListHelp >>> >>> >> >> -- >> Fabrice HOBAYA >> PhD - Réseaux, Télécommunications, Systèmes et Architectures >> Ingénieur d'études Viveris Technologies >> +335 61 00 31 84fabrice.hobaya@xxxxxxxxxxxxxxxxxxxx >> >> > > -- > Fabrice HOBAYA > PhD - Réseaux, Télécommunications, Systèmes et Architectures > Ingénieur d'études Viveris Technologies > +335 61 00 31 84fabrice.hobaya@xxxxxxxxxxxxxxxxxxxx > >
Attachment:
ifconfig_ST
Description: Binary data
Attachment:
smcrouteST1_conf.sh
Description: Bourne shell script
Attachment:
smcrouteGW_conf.sh
Description: Bourne shell script
Attachment:
ifconfig_GW
Description: Binary data
| Thread Previous • Date Previous • Date Next • Thread Next |
