opensand team mailing list archive

[Jussi Isokangas <jussi.t.isokangas@xxxxxxxxxxxxxx>]

 Hi
It would be easier to work with opensand If I can see all menus for config.*
Ican't see bottom of the manager window. I'm using vm on virtualbox 4.3.6
and I can't drag the running program between workspaces like on host
machine*. I have tried lot of tricks. Has anyone solution for that?


*If you changed configuration directly in files, you may have change the
wrong ones. In order to edit configuration parameters, you have to use the
manager advanced window accessible through the configuration tab.*

No, I didn't change.


 Yes with same values.
*Did you tried to ping the GW to be sure the platform is correctly working
before using iperf commands ?*
Yes ping from ST to GW works normally like first steps about 600ms.


Br, Jussi


On 13 February 2014 15:22, Julien BERNARD <jbernard@xxxxxxxxxxxxxxxxxxx>wrote:

> Jussi,
>
>
>  Actually I first tried that 192.168.42.3 address with pad results. Now  I
>> see core.conf and core_clobe.conf set for 1m. Am I right?
>> Have I change settings inside these files?
>>
> If you changed configuration directly in files, you may have change the
> wrong ones. In order to edit configuration parameters, you have to use the
> manager advanced window accessible through the configuration tab.
>
>
>  I tried just minute ago and 1m gives tree not received ack. 5m gives 10
>> not received ack. It seems that 1m is limit and whit this value ST doesn't
>> disconnect. If I try 2m ST disconnect but not 1m and under.
>>
> Did you used the same commands as in previous mail ? If the acks you
> mentioned are iperf ack there may be a problem with the platform.
> Did you tried to ping the GW to be sure the platform is correctly working
> before using iperf commands ?
>
> BR,
>
> --
> Julien BERNARD
>
>