openshot.developers team mailing list archive

[GMaq <info@xxxxxxxxxxxx>]

OK

Firstly thanks for your attention on this, it is truly appreciated. I am
very much looking forward to featuring your hard work in the upcoming
release of AV Linux 3.0 coming out by the end of November, I know I
personally will use x264 export all the time and am very much looking
forward to hopefully assisting you in resolving it.

I am using mlt 0.4.6, I'm not sure if the CLI syntax has changed or not.
but I'm not having a lot luck so far, here's the output:

tester@av3dev:~$ melt -verbose -profile dv_pal_wide
Usage: melt [options] [producer [name=value]* ]+
Options:
  -attach filter[:arg] [name=value]*       Attach a filter to the output
  -attach-cut filter[:arg] [name=value]*   Attach a filter to a cut
  -attach-track filter[:arg] [name=value]* Attach a filter to a track
  -attach-clip filter[:arg] [name=value]*  Attach a filter to a producer
  -audio-track | -hide-video               Add an audio-only track
  -blank frames                            Add blank silence to a track
  -consumer id[:arg] [name=value]*         Set the consumer (sink)
  -debug                                   Set the logging level to debug
  -filter filter[:arg] [name=value]*       Add a filter to the current track
  -group [name=value]*                     Apply properties repeatedly
  -help                                    Show this message
  -join clips                              Join multiple clips into one cut
  -mix length                              Add a mix between the last two cuts
  -mixer transition                        Add a transition to the mix
  -null-track | -hide-track                Add a hidden track
  -profile name                            Set the processing settings
  -progress                                Display progress along with position
  -remove                                  Remove the most recent cut
  -repeat times                            Repeat the last cut
  -query                                   List all of the registered services
  -query "consumers" | "consumer"=id       List consumers or show info about one
  -query "filters" | "filter"=id           List filters or show info about one
  -query "producers" | "producer"=id       List producers or show info about one
  -query "transitions" | "transition"=id   List transitions, show info about one
  -serialise [filename]                    Write the commands to a text file
  -silent                                  Do not display position/transport
  -split relative-frame                    Split the last cut into two cuts
  -swap                                    Rearrange the last two cuts
  -track                                   Add a track
  -transition id[:arg] [name=value]*       Add a transition
  -verbose                                 Set the logging level to verbose
  -version                                 Show the version and copyright
  -video-track | -hide-audio               Add a video-only track
For more help: <http://www.mltframework.org/>
tester@av3dev:~$ 

Not sure if that is what you are looking for there, next command:

tester@av3dev:~$ melt /home/tester/test.avi* -consumer avformat:
+-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+
|1=-10| |2= -5| |3= -2| |4= -1| |5=  0| |6=  1| |7=  2| |8=  5| |9= 10|
+-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+
+---------------------------------------------------------------------+
|               H = back 1 minute,  L = forward 1 minute              |
|                 h = previous frame,  l = next frame                 |
|           g = start of clip, j = next clip, k = previous clip       |
|                0 = restart, q = quit, space = play                  |
+---------------------------------------------------------------------+
Current Position:         9921

***At this point the terminal pukes out a huge amount of garbled code
including various numbers and symbols ending like this with a blinking
cursor***

Current Position:         9921
tester@av3dev:~$ 62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c62;9;c

OK now the final command:

tester@av3dev:~$ melt /home/tester/test.mp4* acodec=libfaac ab=128k ar=44100 f=mp4 vcodec=libx264 minrate=0 b=900k
Failed to load "/home/tester/test.mp4*"
Usage: melt [options] [producer [name=value]* ]+
Options:
  -attach filter[:arg] [name=value]*       Attach a filter to the output
  -attach-cut filter[:arg] [name=value]*   Attach a filter to a cut
  -attach-track filter[:arg] [name=value]* Attach a filter to a track
  -attach-clip filter[:arg] [name=value]*  Attach a filter to a producer
  -audio-track | -hide-video               Add an audio-only track
  -blank frames                            Add blank silence to a track
  -consumer id[:arg] [name=value]*         Set the consumer (sink)
  -debug                                   Set the logging level to debug
  -filter filter[:arg] [name=value]*       Add a filter to the current track
  -group [name=value]*                     Apply properties repeatedly
  -help                                    Show this message
  -join clips                              Join multiple clips into one cut
  -mix length                              Add a mix between the last two cuts
  -mixer transition                        Add a transition to the mix
  -null-track | -hide-track                Add a hidden track
  -profile name                            Set the processing settings
  -progress                                Display progress along with position
  -remove                                  Remove the most recent cut
  -repeat times                            Repeat the last cut
  -query                                   List all of the registered services
  -query "consumers" | "consumer"=id       List consumers or show info about one
  -query "filters" | "filter"=id           List filters or show info about one
  -query "producers" | "producer"=id       List producers or show info about one
  -query "transitions" | "transition"=id   List transitions, show info about one
  -serialise [filename]                    Write the commands to a text file
  -silent                                  Do not display position/transport
  -split relative-frame                    Split the last cut into two cuts
  -swap                                    Rearrange the last two cuts
  -track                                   Add a track
  -transition id[:arg] [name=value]*       Add a transition
  -verbose                                 Set the logging level to verbose
  -version                                 Show the version and copyright
  -video-track | -hide-audio               Add a video-only track
For more help: <http://www.mltframework.org/>
tester@av3dev:~$ 

My uneducated guess is step 3 failed due to the lack of completion of
step 2, please advise further. Thanks for your time.

-- 
No video on exported image movie as h2.64
https://bugs.launchpad.net/bugs/457732
You received this bug notification because you are a member of OpenShot
Developers, which is subscribed to OpenShot Video Editor.

Status in OpenShot Video Editor: New

Bug description:
I imported a bunch of images as a sequence, added a title one and an audio track. I tried exporting to mp4 h.264 and youtubehd but I always get audio without the video.

Here's how my project looks like, seems everything is fine with it:

http://www.ubuntu-pics.de/bild/28163/screenshot_05_tCLAYY.png
http://www.ubuntu-pics.de/bild/28162/screenshot_02_efdM2f.png

and the preview function does work as I'd expect it to be.

it worked fine with ogg for whatever reason.