openstack team mailing list archive

[Anil Vishnoi <vishnoianil@xxxxxxxxx>]

Thanks Aaron for quick response.

OS dashboard shows that both the NIC got their IP addresses from respective
DHCP servers. It also shows the second IP address which actually is
requested by Cirros VM image. If i run udhcp manually from the VM, will it
get the same IP address from its DHCP server? If yes, than i think there is
no issue, but if not then i think it will create inconsistency on what
dashboard is showing and what actual IP address it got assigned.




On Thu, Apr 18, 2013 at 12:21 AM, Aaron Rosen <arosen@xxxxxxxxxx> wrote:

> Hi,
>
> The cirros image only starts the dhcp client on the eth0 interface. If you
> have a vm with multiple interfaces you need to manually run udhcp -i
> <interface> or change the network configuration file in order to start the
> dhcp client for you .
>
> Aaron
>
>
> On Wed, Apr 17, 2013 at 11:44 AM, Anil Vishnoi <vishnoianil@xxxxxxxxx>wrote:
>
>> Hi All,
>>
>> I created two network, one private network for project (say
>> 'TestProject'), and second network at admin level, but its shared network.
>>
>> I spawned one VM and connected it to private network. VM successfully
>> boots up and get the IP address from its respective private network DHCP.
>>
>> I spawned second VM and connected it to the shared network, and it boots
>> up successfully and gets IP address from the shared network DHCP.
>>
>> I spawned third VM and connected it to both the network, and the order
>> was 1.Private Network 2. Shared Network. VM boots up successfully but only
>> gets the IP address from the private network DHCP and second NIC didn't
>> receive any ip from shared network DHCP.
>>
>> Next i spawned fourth VM and this time i changed the ordering of NIC, 1.
>> Shared Network 2.Private Network. VM gets the IP address from shared
>> network DHCP but not from private network DHCP. Looks like whatever first
>> network you add while creating VM, it will just make DHCP request for the
>> first network only. Is this expected behavior ? My understanding is both
>> the NIC should get IP address if DHCP is enabled for the connected networks.
>>
>> Few point i want to mention
>>
>> * I am using cirros VM image
>> * Meta data service is running on my network node, but i am still not
>> able to reach the mata data service.
>>
>> Please let me know if further details are needed for debugging this
>> issue. Thanks in advance!!!
>>
>> --
>> Thanks
>> Anil
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~openstack
>> Post to     : openstack@xxxxxxxxxxxxxxxxxxx
>> Unsubscribe : https://launchpad.net/~openstack
>> More help   : https://help.launchpad.net/ListHelp
>>
>>
>


-- 
Thanks
Anil