rohc team mailing list archive
-
rohc team
-
Mailing list archive
-
Message #00080
Re: decompressor not working for me
Hi,
Compression for me is working with packet lengths less than <1500 bytes
attached is the text with out of my program.
Can you please advise me regarding this..?
Regards,
Harpreet
On Wed, 2009-11-25 at 10:35 +0100, Didier Barvaux wrote:
> Hi,
>
> > The code I replaced it with is given below.
> > /* read the IP-ID field */
> > {
> > uint16_t temp = 0;
> > temp = packet[0];
> > temp <<= 8;
> > temp |= packet[1];
> > //ipv4_set_id(ip, *((uint16_t *) packet));
> > ipv4_set_id(ip, temp);
> > rohc_debugf(3, "IP-ID = 0x%04x\n", ntohs(ipv4_get_id(*ip)));
> > packet += 2;
> > read += 2;
> > }
> > from below given function "d_decode_dynamic_ip4".
>
> Thank you. Could you please compile and run the attached test program
> to check if the uint16_t cast is the root of your problem ? You may
> follow these steps :
> $ gcc -g -Wall -Werror -c -o test_uint16t_cast.o test_uint16t_cast.c
> $ gcc test_uint16t_cast.o -o test_uint16t_cast
> $ ./test_uint16t_cast
> first 2 bytes = 0x0100
> last 2 bytes = 0x0302
>
> Please report me any GCC warning. The result given by the test program
> may differ from the one I get on x86 depending on the endianness of your
> microcontroller.
>
>
> > I have not used gdb yet on uclinux.
> >
> > can you send some instructions as you said?
> > It will be helpful.
>
> I do not know how to install gdb on uclinux if it is not done yet. Use
> the documentation provided by the manufacturer.
>
> Once gdb is setup on your platform, you may follow these instructions :
> $ gdb ./test_program [optional_arguments]
> (gdb) run
> <gdb reports crash here>
> (gdb) bt
>
> Do not forget to build you test program with "-g" so that debug
> information is included in the binary.
>
> Didier Barvaux
> Viveris Technologies
>
> _______________________________________________
> Mailing list: https://launchpad.net/~rohc
> Post to : rohc@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~rohc
> More help : https://help.launchpad.net/ListHelp
--
Software Engineer
1Spatial Australia
+61 3 52616840
[../rohc/rohc_comp.c:78 rohc_alloc_compressor()] creating compressor
[../rohc/rohc_decomp.c:301 rohc_alloc_decompressor()] creating decompressor
45 0 5 dc 56 22 20 0 40 1 49 98 c6 a8 14 a c6 a8 14 c 8 0 33 e3 e2 1 0 1 0 ee e1 2b 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[../rohc/rohc_comp.c:186 rohc_compress()] size of IP packet = 1500 bytes
[../rohc/rohc_comp.c:209 rohc_compress()] IP protocol = 1
[../rohc/rohc_comp.c:214 rohc_compress()] no profile found, using default IP profile
[../rohc/rohc_comp.c:1132 c_find_context()] no context was found
[../rohc/rohc_comp.c:1046 c_create_context()] take the first unused context (CID = 0)
[../rohc/rohc_comp.c:1086 c_create_context()] context (CID = 0) created (num_used = 1)
[../rohc/rohc_comp.c:280 rohc_compress()] selected compression profile = IP / Compressor (0x0004)
[../rohc/rohc_comp.c:1313 c_piggyback_get()] add 0 byte(s) of feedback data
[../rohc/rohc_comp.c:298 rohc_compress()] compress the packet #1
[ERROR] [../rohc/c_generic.c:793 c_generic_encode()] fragment error in outer IP header
[ERROR] [../rohc/rohc_comp.c:305 rohc_compress()] error while compressing with the profile, using uncompressed profile
[ERROR] [../rohc/rohc_comp.c:319 rohc_compress()] uncompressed profile not found, giving up
ip_size = 1500 & rohc_size = 0
compression of packet failed
Follow ups
References
