sslug-teknik team mailing list archive

["John Poulsen" <jvp@xxxxxx>]

Hej.

Jeg har instillet mine serielporte til følgende:
COM1: 3F8H - IRQ 4
COM2: 2F8H - IRQ 3
I virus 98, er der ingen problemer, men følgende logfiler giver dette:
Faillog:
  tty2        y¹p7
Warn:
Invalid password for  `unknown´ on `tty1´
Boot.msg:
Inspecting /boot/System.map
Symbol table has incorrect version number.

Cannot find map file.
No module symbols loaded.
klogd 1.3-3, log source = /proc/kmsg started.
<4>Linux version 2.2.10 (root@Asterix) (gcc version 2.7.2.3) #1 SMP
Tue Jun 22 10:37:14 CEST 1999
<4>mapped APIC to ffffe000 (002ed000)
<4>mapped IOAPIC to ffffd000 (002ee000)
<4>Detected 300690823 Hz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 599.65 BogoMIPS
<4>Memory: 127336k/131008k available (1472k kernel code, 420k
reserved, 1712k data, 68k init)
<6>Checking 386/387 coupling... OK, FPU using exception 16 error
reporting.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>per-CPU timeslice cutoff: 1.56 usecs.
<4>CPU0: AMD AMD-K6(tm) 3D processor stepping 00
<5>SMP motherboard not detected. Using dummy APIC emulation.
<4>PCI: PCI BIOS revision 2.10 entry at 0xf0560
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>Linux NET4.0 for Linux 2.2
<6>Based upon Swansea University Computer Society NET3.039
<6>NET4: Unix domain sockets 1.0 for Linux NET4.0.
<5>IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<4>Initializing RT netlink socket
<4>Starting kswapd v 1.5
<6>parport0: PC-style at 0x378 [SPP,ECP,ECPEPP,ECPPS2]
<4>parport0: detected irq 7; use procfs to enable interrupt-driven
operation.
<6>parport0: Printer, HEWLETT-PACKARD DESKJET 880C
<6>Detected PS/2 Mouse Port.
<6>Serial driver version 4.27 with no serial options enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<4>pty: 256 Unix98 ptys configured
<6>lp0: using parport0 (polling).
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
<6>Real Time Clock Driver v1.09
<6>es1370: version v0.22 time 10:39:09 Jun 22 1999
<6>es1370: found adapter at io 0xd800 irq 5
<6>es1370: features: joystick on, line in, mic impedance 0
<5>ISDN subsystem Rev: 1.55/1.47/1.55/1.33/none/1.2
<6>loop: registered device at major 7
<4>PCI_IDE: unknown IDE controller on PCI bus 00 device 78, VID=10b9,
DID=5229
<4>PCI_IDE: not 100% native mode: will probe irqs later
<4>PCI_IDE: simplex device:  DMA disabled
<4>ide0: PCI_IDE Bus-Master DMA disabled (BIOS)
<4>PCI_IDE: simplex device:  DMA disabled
<4>ide1: PCI_IDE Bus-Master DMA disabled (BIOS)
<4>hda: IBM-DTTA-351010, ATA DISK drive
<4>hdb: IBM-DTTA-351010, ATA DISK drive
<4>hdd: IBM-DTTA-350640, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: IBM-DTTA-351010, 9671MB w/466kB Cache, CHS=1232/255/63
<6>hdb: IBM-DTTA-351010, 9671MB w/466kB Cache, CHS=1232/255/63
<6>hdd: IBM-DTTA-350640, 6197MB w/468kB Cache, CHS=13431/15/63
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
<4>linear personality registered
<4>raid0 personality registered
<4>raid1 personality registered
<6>sym53c8xx: at PCI bus 0, device 12, function 0
<4>sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
<6>sym53c8xx: 53c876 detected with Symbios NVRAM
<6>sym53c876-0: rev=0x26, base=0xdd800000, io_port=0xd000, irq=11
<6>sym53c876-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
<6>sym53c876-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
05/4e/80/01/00/24
<6>sym53c876-0: final   SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
05/46/80/00/08/24
<6>sym53c876-0: on-chip RAM at 0xdd000000
<4>sym53c876-0: resetting, command processing suspended for 2 seconds
<6>sym53c876-0: restart (scsi reset).
<4>sym53c876-0: enabling clock multiplier
<4>sym53c876-0: Downloading SCSI SCRIPTS.
<4>scsi0 : sym53c8xx - version 1.3c
<4>scsi : 1 host.
<4>sym53c876-0: command processing resumed
<4>  Vendor: PIONEER   Model: CD-ROM DR-U10X    Rev: 1.07
<4>  Type:   CD-ROM                             ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
<4>  Vendor: SyQuest   Model: EZ135S            Rev: 1-19
<4>  Type:   Direct-Access                      ANSI SCSI revision: 02
<4>Detected scsi removable disk sda at scsi0, channel 0, id 2, lun 0
<4>  Vendor: PLEXTOR   Model: CD-ROM PX-40TS    Rev: 1.00
<4>  Type:   CD-ROM                             ANSI SCSI revision: 02
Kernel logging (proc) stopped.
Kernel log daemon terminating.

Har du tid, vil jeg gerne have hjælp - hurtigt.

Mvh.

John Poulsen