sslug-teknik team mailing list archive

[Mogens Bohl Pedersen <mbelwood@xxxxxx>]

Jeg har set et svar fra Ed Hamrick idag den 28 august i
sane-develop@xxxxxxxxxxx hvor han gætter på at HP 3300C en Avision
scanner, jeg har klippet dette ud fra Ed Hamricks mail:

klip:

>I recently figured out how to program the HP 5300C 
>(and I suspect the HP 3300C).
 
>The 5300C is actually built by Avision, and uses the Avision
>scsi command set.  The scsi commands are encapsulated in
>USB reads and writes as follows:
 
>1) Write CDB to bulk data endpoint
>2) Read or write command data to/from a bulk data endpoint (if len > 0)
>3) Read 1 byte of status data from interrupt endpoint (0==success)
 
>There's one input bulk data endpoint, one output endpoint,
>and one interrupt endpoint.
 
>Interestingly, the Minolta Scan Dual II film scanner is also
>built by Avision, and uses the same command set as the
>HP 5300C. I haven't tested the 3300C  but I'm
>pretty sure it is built by Avision as well.
 
>The Scan Dual II has VID=0x0638 PID=0x026a
>The HP 5300C has VID=0x03f0 PID=0x0701
>The HP 3300C has VID=0x03f0 PID=0x0205

klip:

Jeg håber at det kan bruges.

SANE til scannere: Source code, list archive, and docs:
http://www.mostang.com/sane/ 

mvh

Mogens