sslug-teknik team mailing list archive

[Claus <claus@xxxxxxxxxx>]

Jeg ved ikke noget særligt om tilslutninger til parallel proten, men ved en
hurtig søgning fandt jeg denne side, prøv om der ikke skulle være noget guf
der.

siden hedder  External Parallel Port devices and Linux

http://www.torque.net/linux-pp.html 


Mvh Claus Harild
> ----------
> From: 	Jan Vittrup Hansen[SMTP:Jan.Vittrup@xxxxxxxxx]
> Reply To: 	sslug-teknik@xxxxxxxx
> Sent: 	Saturday, February 03, 2001 5:37 PM
> To: 	sslug-teknik
> Subject: 	[TEKNIK] (Parallel) tape 
> 
>      Hej,
> 
> Er der nogle successhistorier med tapedrev ved parallel porten? 
> (specifikt HP Colorado 10/20GB (Travan))
> Kan det passe at jeg skal benytte ftape/zftape? I så fald kan jeg da 
> nøjes med den version 3,
> der følger med min redhat 6.1 kerne 2.2.12-20 - den klager nemlig over 
> min enhed ikke er korrekt konfigureret når jeg benytter "mt":
> 
> /sbin/lsmod
> 
> Module                  Size  Used by
> parport_probe           2980   0  (autoclean)
> parport_pc              5620   1  (autoclean)
> lp                      4476   0  (autoclean)
> parport                 7124   1  (autoclean) [parport_probe parport_pc
> lp]
> nfsd                  144060   8  (autoclean)
> lockd                  30984   0  (autoclean) [nfsd]
> sunrpc                 52516   0  (autoclean) [nfsd lockd]
> rtl8139                12188   1  (autoclean)
> 
> /sbin/lsmod
> 
> Module Size Used by
> zftape 59084 -1 (unused)
> ftape 105844 0 [zftape]
> parport_probe 2980 0 (autoclean)
> parport_pc 5620 1 (autoclean)
> lp 4476 0 (autoclean)
> parport 7124 1 (autoclean) [parport_probe parport_pc lp]
> nfsd 144060 8 (autoclean)
> lockd 30984 0 (autoclean) [nfsd]
> sunrpc 52516 0 (autoclean) [nfsd lockd]
> rtl8139                12188   1  (autoclean)
> 
> mt -f /dev/qft0 status
> /dev/qft0: Device not configured
> 
> tail -40  /var/log/messages
> Feb  3 17:22:32 nulle kernel: ftape v3.04d 25/11/97
> Feb  3 17:22:32 nulle kernel: (c) 1993-1996 Bas Laarhoven (bas@xxxxxxxx)
> Feb  3 17:22:32 nulle kernel: (c) 1995-1996 Kai Harrekilde-Petersen 
> (khp@xxxxxxxxxxxxx)
> Feb  3 17:22:32 nulle kernel: (c) 1996-1997 Claus-Justus Heine 
> (claus@xxxxxxxxxxxxxxxxxxxxxxxx)
> Feb  3 17:22:32 nulle kernel: QIC-117 driver for QIC-40/80/3010/3020 
> floppy tape drives
> Feb  3 17:22:32 nulle kernel: Compiled for Linux version 2.2.12-20 with 
> versioned symbols
> Feb  3 17:22:32 nulle kernel: [000] ftape-init.c (ftape_init) - 
> installing QIC-117 floppy tape hardware drive ... .
> Feb  3 17:22:32 nulle kernel: [001] ftape-init.c (ftape_init) - 
> ftape_init @ 0xc286604c.
> Feb  3 17:22:32 nulle kernel: [002]   ftape-buffer.c (add_one_buffer) - 
> buffer nr #1 @ c18494a0, dma area @ c0720000.
> Feb  3 17:22:32 nulle kernel: [003]   ftape-buffer.c (add_one_buffer) - 
> buffer nr #2 @ c0481dc0, dma area @ c0588000.
> Feb  3 17:22:32 nulle kernel: [004]   ftape-buffer.c (add_one_buffer) - 
> buffer nr #3 @ c124ba40, dma area @ c0428000.
> Feb  3 17:22:32 nulle kernel: [005]   ftape-calibr.c (time_inb) - inb() 
> duration: 637 nsec.
> Feb  3 17:22:32 nulle kernel: [006]  ftape-calibr.c (ftape_calibrate) - 
> TC for `ftape_udelay()' = 834 nsec (at 10239 counts).
> Feb  3 17:22:32 nulle kernel: [007]  ftape-calibr.c (ftape_calibrate) - 
> TC for `fdc_wait()' = 1721 nsec (at 5119 counts).
> Feb  3 17:22:32 nulle kernel: zftape for ftape v3.04d 25/11/97
> Feb  3 17:22:32 nulle kernel: (c) 1996, 1997 Claus-Justus Heine 
> (claus@xxxxxxxxxxxxxxxxxxxxxxxx)
> Feb  3 17:22:32 nulle kernel: vfs interface for ftape floppy tape driver.
> Feb  3 17:22:32 nulle kernel: Support for QIC-113 compatible volume 
> table, dynamic memory allocation
> Feb  3 17:22:32 nulle kernel: and builtin compression (lzrw3 algorithm).
> Feb  3 17:22:32 nulle kernel: Compiled for Linux version 2.2.12-20 with 
> versioned symbols
> Feb  3 17:22:32 nulle kernel: [008] zftape-init.c (zft_init) - zft_init 
> @ 0xc288acb0.
> Feb  3 17:22:32 nulle kernel: [009] zftape-init.c (zft_init) - 
> installing zftape VFS interface for ftape driver ....
> Feb  3 17:23:16 nulle kernel: [010]     fdc-io.c (fdc_config) - fdc 
> base: 0x3f0, irq: 6, dma: 2.
> Feb  3 17:23:16 nulle kernel: [011]     fdc-io.c (fdc_probe) - Type 
> 82077AA compatible FDC found.
> Feb  3 17:23:22 nulle kernel: [012]    ftape-ctl.c 
> (ftape_activate_drive) - no tape drive found !.
> Feb  3 17:23:22 nulle kernel: [013]   ftape-ctl.c 
> (ftape_enable_R7ec0d5d4) - 
> ftape_activate_drive(&ftape_status.fti_drive_type) failed: -19.
> Feb  3 17:23:22 nulle kernel: [014]  zftape-ctl.c (_zft_open) - 
> ftape_enable failed: -19.
> Feb  3 17:23:22 nulle kernel: [015] zftape-init.c (zft_open) - 
> _ftape_open failed.
> 
> Den har ganske ret - der intet tape på FDC'en den skulle gerne teste den 
> parallelle port.
> Jeg ingen options på mine moduler - kerne docs'ene handler om IDE 
> controllere, nævner ikke parallelle,
> Ftape-HOWTO'en virker noget tynd hvad gælder parallelle ting - og kudzu 
> finder intet.
> 
> Nogle gode ideer til hvordan jeg kommer videre?
> 
>   mvh, Jan...
>