sslug-teknik team mailing list archive

[Anders Nielsen <loverman@xxxxxxxxxxx>]

Jeg har ellers også de ting med, som du nævner ..

Nedenstående er et snip fra /var/log/messages.
Jeg hæfter mig især ved linien
> Mar 14 23:08:14 loverman kernel: PCI: The same IRQ used for device 00:04.2

Hvad er nu det for noget? Skal jeg selv specificere en anden IRQ? Hvordan gør
jeg det ?

samt linierne :
> Mar 14 23:08:14 loverman kernel: bttv0: i2c: checking for TDA7432 @ 0x8a...
not found

Hvad er det den (ikke) finder ?

Jeg har med held brugt programmet 'radio', hvor jeg har kunnet høre lidt P3 med
en del støj - stadig mange problemer med at få billeder frem overhovedet ..


Alle forslag modtages med kyshånd.


Mar 14 23:08:13 loverman kernel: Linux video capture interface: v1.00
Mar 14 23:08:14 loverman kernel: i2c-core.o: i2c core module
Mar 14 23:08:14 loverman kernel: i2c-algo-bit.o: i2c bit algorithm module
Mar 14 23:08:14 loverman kernel: bttv: driver version 0.7.57 loaded
Mar 14 23:08:14 loverman kernel: bttv: using 2 buffers with 2080k (4160k total)
for capture
Mar 14 23:08:14 loverman kernel: bttv: Host bridge needs ETBF enabled.
Mar 14 23:08:14 loverman kernel: bttv: Bt8xx card found (0).
Mar 14 23:08:14 loverman kernel: PCI: Found IRQ 9 for device 00:0d.0
Mar 14 23:08:14 loverman kernel: PCI: The same IRQ used for device 00:04.2
Mar 14 23:08:14 loverman kernel: PCI: The same IRQ used for device 00:0d.1
Mar 14 23:08:14 loverman kernel: bttv0: Bt878 (rev 17) at 00:0d.0, irq: 9,
latency: 32, memory: 0xde800000
Mar 14 23:08:14 loverman kernel: bttv0: subsystem: 0070:13eb  =>  Hauppauge
WinTV  =>  card=10
Mar 14 23:08:14 loverman kernel: bttv0: model: BT878(Hauppauge new (bt878))
[insmod option]
Mar 14 23:08:14 loverman kernel: bttv0: enabling 430FX/VP3 compatibilty
Mar 14 23:08:14 loverman kernel: bttv0: Hauppauge msp34xx: reset line init
Mar 14 23:08:14 loverman kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl: 1  sda:
1 -- testing...
Mar 14 23:08:14 loverman kernel: i2c-algo-bit.o:1 scl: 1  sda: 0
Mar 14 23:08:14 loverman kernel: i2c-algo-bit.o:2 scl: 1  sda: 1
Mar 14 23:08:14 loverman kernel: i2c-algo-bit.o:3 scl: 0  sda: 1
Mar 14 23:08:14 loverman kernel: i2c-algo-bit.o:4 scl: 1  sda: 1
Mar 14 23:08:14 loverman kernel: i2c-algo-bit.o: bt848 #0 passed test.
Mar 14 23:08:14 loverman kernel: i2c-core.o: adapter bt848 #0 registered as
adapter 0.
Mar 14 23:08:14 loverman kernel: bttv0: Hauppauge eeprom: model=44314,
tuner=Philips FM1216 (5), radio=yes
Mar 14 23:08:14 loverman kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not
found
Mar 14 23:08:14 loverman kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not
found
Mar 14 23:08:14 loverman kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not
found
Mar 14 23:08:14 loverman kernel: tvaudio: TV audio decoder + audio/video mux
driver
Mar 14 23:08:14 loverman kernel: tvaudio: known chips:
tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
Mar 14 23:08:14 loverman kernel: i2c-core.o: driver generic i2c audio driver
registered.
Mar 14 23:08:14 loverman kernel: i2c-core.o: driver i2c TV tuner driver
registered.
Mar 14 23:08:14 loverman kernel: tuner: chip found @ 0x61
Mar 14 23:08:14 loverman kernel: bttv0: i2c attach [Philips PAL]
Mar 14 23:08:14 loverman kernel: i2c-core.o: client [Philips PAL] registered to
adapter [bt848 #0](pos. 0).
Mar 14 23:08:14 loverman kernel: bttv0: PLL: 28636363 => 35468950 ... ok



"Henrik Bøgh" wrote:

> Følgende virker for mig:
> make menuconfig/x-config
> Character devices -> <*> I2C support -> <*> I2C bit-banging interfaces (NEW)
> Multimedia devices -> <*> Video 4 Linux
>
> Under opstart kommer så flg.:
>
> ...
> i2c: initialized
> Linux video capture interface: v1.00
> bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 96, irq: 11, memory:
> 0xe1000000.
> bttv: 1 Bt8xx card(s) found.
> bttv0: NO fader chip: TEA6300
> bttv0: model: BT878(Hauppauge new)
>