← Back to team overview

sslug-teknik team mailing list archive

Re: U-understoetede haarde varer til 2.4.18?

 

"Henrik Størner" wrote:
> >Rivendell:~# modprobe eepro100
> >/lib/modules/2.4.18/kernel/drivers/net/eepro100.o: init_module: No such
> >device
> 
> Det siger ikke så meget. Det interessante er hvad kernen logger
> (kig med "dmesg" efter at du har prøvet at loade modulet).

Jeg har vedhaeftet output fra dmesg, men jeg kan ikke se at den skriver
noget om dette.

> Output fra "lspci -v" vil også være interessant, for at se om
> den overhovedet finder dit netkort på PCI-bussen.

Ogsaa vedhaeftet output.

Og jeg har vedhaeftet min syslog.

Andet der kunne vaere interessant? :)



Cheers
-- 
http://www.HardcoreProcessing.com
Linux version 2.4.18 (root@Rivendell) (gcc version 2.95.4 20011002 (Debian prerelease)) #45 Tue Oct 8 18:19:40 EEST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
 BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
found SMP MP-table at 000fb900
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: INTEL    Product ID: I845E        APIC at: 0xFEE00000
Processor #0 Unknown CPU [15:1] APIC version 20
I/O APIC #2 Version 32 at 0xFEC00000.
Processors: 1
Kernel command line: BOOT_IMAGE=Linux ro root=302 2.4.18
Initializing CPU#0
Detected 1703.907 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3394.76 BogoMIPS
Memory: 512708k/524224k available (1758k kernel code, 11128k reserved, 622k data, 260k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 3febfbff 00000000 00000000 00000000
CPU:             Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-17, 2-21, 2-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 21.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00178020
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0020
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    0    0   0   0    1    1    71
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 001 01  0    0    0   0   0    1    1    79
 0d 001 01  0    0    0   0   0    1    1    81
 0e 001 01  0    0    0   0   0    1    1    89
 0f 001 01  0    0    0   0   0    1    1    91
 10 001 01  1    1    0   1   0    1    1    99
 11 000 00  1    0    0   0   0    0    0    00
 12 001 01  1    1    0   1   0    1    1    A1
 13 001 01  1    1    0   1   0    1    1    A9
 14 001 01  1    1    0   1   0    1    1    B1
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 001 01  1    1    0   1   0    1    1    B9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1703.9136 MHz.
..... host bus clock speed is 100.2300 MHz.
cpu: 0, clocks: 1002300, slice: 501150
CPU0<T0:1002288,T1:501136,D:2,S:501150,C:1002300>
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router default [8086/24c0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P1) -> 18
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B3,I2,P0) -> 18
PCI->APIC IRQ transform: (B3,I8,P0) -> 20
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.10 (20020120) Richard Gooch (rgooch@xxxxxxxxxxxxx)
devfs: boot_options: 0x0
 tbxface-0099 [01] Acpi_load_tables      : ACPI Tables successfully loaded
Parsing Methods:..........................................................................................................................................................
154 Control Methods found and parsed (531 nodes total)
ACPI Namespace successfully loaded at root c03ad120
ACPI: Core Subsystem version [20011018]
evxfevnt-0081 [02] Acpi_enable           : Transition to ACPI mode successful
Executing device _INI methods:..............................................
46 Devices found: 46 _STA, 1 _INI
Completing Region and Field initialization:...................
12/16 Regions, 7/7 Fields initialized (531 nodes total)
ACPI: Subsystem enabled
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ DETECT_IRQ SERIAL_PCI ISAPNP SERIAL_ACPI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24cb
PCI: Device 00:1f.1 not available because of resource collisions
PCI_IDE: chipset revision 1
PCI_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L060AVVA07-0, ATA DISK drive
hdc: Pioneer DVD-ROM ATAPIModel DVD-500M 010, ATAPI CD/DVD-ROM drive
hdd: CR-48XATE, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=7476/255/63
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Intel i845 @ 0xe0000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver rio500
rio500.c: v1.1:USB Rio 500 driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 260k freed
usb-uhci.c: $Revision: 1.275 $ time 18:25:29 Oct  8 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
PPP BSD Compression module registered
dss1_divert module successfully installed
Linux video capture interface: v1.00
Colour QuickCam for Video4Linux v0.05
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
hub.c: USB new device connect on bus2/1, assigned device number 2
V4L-Driver for Vision CPiA based cameras v0.7.4
usb.c: registered new driver cpia
PPP generic driver version 2.4.1
usb.c: USB device 2 (vend/prod 0x5a9/0xa511) is not claimed by any active driver.
usb.c: registered new driver wacom
wacom.c: v1.21:USB Wacom Graphire and Wacom Intuos tablet driver
mice: PS/2 mouse device common for all mice
PPP BSD Compression module registered
Creative EMU10K1 PCI Audio Driver, version 0.18, 18:25:20 Oct  8 2002
emu10k1: EMU10K1 rev 7 model 0x8064 found, IO at 0xc800-0xc81f, IRQ 18
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
emu10k1: SBLive! 5.1 card detected
usb.c: registered new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
nbd: registered device at major 43
SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256) (6 bit encapsulation enabled).
SLIP linefill/keepalive option.
hub.c: USB new device connect on bus2/2, assigned device number 3
input0: Wacom Graphire on usb2:3.0
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers
usb.c: registered new driver ov511
ov511.c: USB OV511+ camera found
ov511.c: model: Generic Camera (no ID)
ov511.c: i2c write retries exhausted
ov511.c: i2c write: error -1
ov511.c: Sensor is an OV6620
ov511.c: Device registered on minor 0
ov511.c: v1.48a for Linux 2.4 : OV511 USB Camera Driver
PPP Deflate Compression module registered
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 11)
	Flags: bus master, fast devsel, latency 0
	Memory at e0000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [e4] #09 [a104]
	Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 11) (prog-if 00 [Normal decode])
	Flags: bus master, 66Mhz, fast devsel, latency 32
	Bus: primary=00, secondary=01, subordinate=02, sec-latency=32
	Memory behind bridge: ddc00000-dfdfffff
	Prefetchable memory behind bridge: d5700000-dd9fffff

00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Micro-star International Co Ltd: Unknown device 3982
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at d800 [size=32]

00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Micro-star International Co Ltd: Unknown device 3982
	Flags: bus master, medium devsel, latency 0, IRQ 19
	I/O ports at dc00 [size=32]

00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 01) (prog-if 20)
	Subsystem: Micro-star International Co Ltd: Unknown device 3981
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at dffffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] #0a [2080]

00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 81) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: dfe00000-dfefffff
	Prefetchable memory behind bridge: dda00000-ddafffff

00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01)
	Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: Micro-star International Co Ltd: Unknown device 3982
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at <unassigned> [size=8]
	I/O ports at <unassigned> [size=4]
	I/O ports at <unassigned> [size=8]
	I/O ports at <unassigned> [size=4]
	I/O ports at fc00 [size=16]
	Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01)
	Subsystem: Micro-star International Co Ltd: Unknown device 3982
	Flags: medium devsel, IRQ 18
	I/O ports at 0c00 [size=32]

01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0201 (rev a3) (prog-if 00 [VGA])
	Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 16
	Memory at de000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d8000000 (32-bit, prefetchable) [size=64M]
	Memory at dd980000 (32-bit, prefetchable) [size=512K]
	Expansion ROM at dfdf0000 [disabled] [size=64K]
	Capabilities: [60] Power Management version 2
	Capabilities: [44] AGP version 2.0

03:02.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
	Subsystem: Creative Labs: Unknown device 8064
	Flags: bus master, medium devsel, latency 32, IRQ 18
	I/O ports at c800 [size=32]
	Capabilities: [dc] Power Management version 1

03:02.1 Input device controller: Creative Labs SB Live! (rev 07)
	Subsystem: Creative Labs Gameport Joystick
	Flags: bus master, medium devsel, latency 32
	I/O ports at cc00 [size=8]
	Capabilities: [dc] Power Management version 1

03:08.0 Ethernet controller: Intel Corp.: Unknown device 103a (rev 81)
	Subsystem: Intel Corp.: Unknown device 1039
	Flags: bus master, medium devsel, latency 32, IRQ 20
	Memory at dfeff000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at c400 [size=64]
	Capabilities: [dc] Power Management version 2

Oct  9 20:40:45 Rivendell syslogd 1.4.1#10: restart.
Oct  9 20:40:46 Rivendell wwwoffled[361]: WWWOFFLE Connection from host Rivendell (127.0.0.1). 
Oct  9 20:40:46 Rivendell wwwoffled[361]: WWWOFFLE Status. 
Oct  9 20:40:46 Rivendell wwwoffled[361]: WWWOFFLE Connection from host Rivendell (127.0.0.1). 
Oct  9 20:40:46 Rivendell wwwoffled[361]: WWWOFFLE Offline. 
Oct  9 20:40:46 Rivendell wwwoffled[361]: WWWOFFLE Connection from host Rivendell (127.0.0.1). 
Oct  9 20:40:46 Rivendell wwwoffled[835]: WWWOFFLE Purge. 
Oct  9 20:40:46 Rivendell wwwoffled[835]: Cannot change to directory 'temp' [No such file or directory]; not purged. 
Oct  9 20:40:46 Rivendell wwwoffled[835]: WWWOFFLE Purge finished. 
Oct  9 20:40:46 Rivendell wwwoffled[361]: WWWOFFLE Connection from host Rivendell (127.0.0.1). 
Oct  9 20:40:46 Rivendell wwwoffled[361]: WWWOFFLE Online. 
Oct  9 20:40:46 Rivendell anacron[404]: Job `cron.daily' terminated
Oct  9 20:40:46 Rivendell anacron[404]: Normal exit (1 jobs run)
Oct  9 20:53:01 Rivendell /USR/SBIN/CRON[844]: (mail) CMD (  if [ -x /usr/sbin/exim -a -f /etc/exim/exim.conf ]; then /usr/sbin/exim -q ; fi)
Oct  9 21:01:07 Rivendell pppd[492]: Terminating on signal 15.
Oct  9 21:01:07 Rivendell pppd[492]: Connection terminated.
Oct  9 21:01:07 Rivendell pppd[492]: Connect time 25.9 minutes.
Oct  9 21:01:07 Rivendell pppd[492]: Sent 58207 bytes, received 1402737 bytes.
Oct  9 21:01:07 Rivendell wwwoffled[361]: WWWOFFLE Connection from host Rivendell (127.0.0.1). 
Oct  9 21:01:07 Rivendell wwwoffled[361]: WWWOFFLE Offline. 
Oct  9 21:01:07 Rivendell pppd[492]: Exit.
Oct  9 21:08:01 Rivendell /USR/SBIN/CRON[875]: (mail) CMD (  if [ -x /usr/sbin/exim -a -f /etc/exim/exim.conf ]; then /usr/sbin/exim -q ; fi)
Oct  9 21:23:01 Rivendell /USR/SBIN/CRON[879]: (mail) CMD (  if [ -x /usr/sbin/exim -a -f /etc/exim/exim.conf ]; then /usr/sbin/exim -q ; fi)
Oct  9 21:34:27 Rivendell -- MARK --
Oct  9 21:38:01 Rivendell /USR/SBIN/CRON[892]: (mail) CMD (  if [ -x /usr/sbin/exim -a -f /etc/exim/exim.conf ]; then /usr/sbin/exim -q ; fi)

References