sslug-teknik team mailing list archive

[gunner carstens <gunner@xxxxxxxxxxxxxxxxxxxx>]

Jeg har i lang tid kunnet bruge mine 2 drev i gentoo. Det er 1 CDROM og 
1 brænder. Men de holdt op med at virke og jeg har ikke kunnet finde 
fejlen. Jeg har ikke lavet nogen ny kerne.

Satte så en knoppix cd i og så at dér virkede begge drev. Jeg har 
forsøgt at kigge i /var/log/messages men synes ikke lige at jeg kan 
finde fejl i den - de ser ud til at blive genkendt uden problemer.


Jeg har fornylig installeret kde3.2 men det har ikke gjort hverken værre 
eller bedre.


Forsøger jeg fra konqueror at åbne en audio CD får jeg følgende fejl:
"An error occurred while loading audiocd:/:
The file or folder / does not exist."


Åbner jeg KsCD får jeg 'ingen disc'.(når jeg har puttet en audio CD i).
Min fstab ser sådan ud:
/dev/cdroms/cdrom0      /mnt/cdrom      iso9660         noauto,ro,user 
        0 0



ls -l /dev/cdroms/cdrom0 ser således ud:
gentoo@liNUX:cdroms$ ls -l /dev/cdroms/cdrom0
lr-xr-xr-x    1 root     root           37 11 apr  2004 
/dev/cdroms/cdrom0 -> /dev/ide/host0/bus0/target0/lun0/disc



og ls -l /dev/ide/host0/bus0/target0/lun0/disc ser sådan ud:
gentoo@liNUX:cdroms$ ls -l /dev/ide/host0/bus0/target0/lun0/disc
brw-------    1 gentoo   cdrom      3,   0  1 jan  1970 
/dev/ide/host0/bus0/target0/lun0/disc


Forsøger jeg at mounte en knoppix CD ser det sådan ud:
liNUX root # mount /mnt/cdrom/
mount: wrong fs type, bad option, bad superblock on /dev/cdroms/cdrom0,
       or too many mounted file systems
eller sådan her:
liNUX root # mount -t iso9660 /dev/cdroms/cdrom0 /mnt/cdrom
mount: wrong fs type, bad option, bad superblock on /dev/cdroms/cdrom0,
       or too many mounted file systems


Nogen der kan gennem skue for mig hvad der er galt.

mvh Gunner




Attatches :/var/log/messages fra seneste boot.

Apr 11 09:25:41 localhost syslogd 1.4.1: restart.
Apr 11 09:25:42 localhost kernel: klogd 1.4.1, log source = /proc/kmsg 
started.
Apr 11 09:25:42 localhost kernel: Cannot find map file.
Apr 11 09:25:42 localhost kernel: Loaded 193 symbols from 7 modules.
Apr 11 09:25:42 localhost kernel: Linux version 2.4.20-gentoo-r6 
(root@cdimage) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r1, 
propolice)) #1 Sat Oct 18 21:51:15 CEST 2003
Apr 11 09:25:42 localhost kernel: BIOS-provided physical RAM map:
Apr 11 09:25:42 localhost kernel:  BIOS-e820: 0000000000000000 - 
000000000009fc00 (usable)
Apr 11 09:25:42 localhost kernel:  BIOS-e820: 000000000009fc00 - 
00000000000a0000 (reserved)
Apr 11 09:25:42 localhost kernel:  BIOS-e820: 00000000000f0000 - 
0000000000100000 (reserved)
Apr 11 09:25:42 localhost kernel:  BIOS-e820: 0000000000100000 - 
0000000017fec000 (usable)
Apr 11 09:25:42 localhost kernel:  BIOS-e820: 0000000017fec000 - 
0000000017fef000 (ACPI data)
Apr 11 09:25:42 localhost kernel:  BIOS-e820: 0000000017fef000 - 
0000000017fff000 (reserved)
Apr 11 09:25:42 localhost kernel:  BIOS-e820: 0000000017fff000 - 
0000000018000000 (ACPI NVS)
Apr 11 09:25:42 localhost kernel:  BIOS-e820: 00000000ffff0000 - 
0000000100000000 (reserved)
Apr 11 09:25:42 localhost kernel: 383MB LOWMEM available.
Apr 11 09:25:42 localhost kernel: On node 0 totalpages: 98284
Apr 11 09:25:42 localhost kernel: zone(0): 4096 pages.
Apr 11 09:25:42 localhost kernel: zone(1): 94188 pages.
Apr 11 09:25:42 localhost kernel: zone(2): 0 pages.
Apr 11 09:25:42 localhost kernel: ACPI: RSDP (v000 ASUS 
      ) @ 0x000f6580
Apr 11 09:25:42 localhost kernel: ACPI: RSDT (v001 ASUS   CUV4X 
12336.12337) @ 0x17fec000
Apr 11 09:25:42 localhost kernel: ACPI: FADT (v001 ASUS   CUV4X 
12336.12337) @ 0x17fec080
Apr 11 09:25:42 localhost kernel: ACPI: BOOT (v001 ASUS   CUV4X 
12336.12337) @ 0x17fec040
Apr 11 09:25:42 localhost kernel: ACPI: DSDT (v001   ASUS CUV4X 
00000.04096) @ 0x00000000
Apr 11 09:25:42 localhost kernel: ACPI: BIOS passes blacklist
Apr 11 09:25:42 localhost kernel: Kernel command line: auto 
BOOT_IMAGE=Gentoo ro root=303 hdc=ide-scsi hdd=ide-scsi
Apr 11 09:25:42 localhost kernel: ide_setup: hdc=ide-scsi
Apr 11 09:25:42 localhost kernel: ide_setup: hdd=ide-scsi
Apr 11 09:25:42 localhost kernel: Initializing CPU#0
Apr 11 09:25:42 localhost kernel: Detected 803.481 MHz processor.
Apr 11 09:25:42 localhost kernel: Console: colour dummy device 80x25
Apr 11 09:25:42 localhost kernel: Calibrating delay loop... 1599.07 BogoMIPS
Apr 11 09:25:42 localhost kernel: Memory: 381736k/393136k available 
(1492k kernel code, 8836k reserved, -1804k data, 100k init, 0k highmem)
Apr 11 09:25:42 localhost kernel: Dentry cache hash table entries: 65536 
(order: 7, 524288 bytes)
Apr 11 09:25:42 localhost kernel: Inode cache hash table entries: 32768 
(order: 6, 262144 bytes)
Apr 11 09:25:42 localhost kernel: Mount-cache hash table entries: 8192 
(order: 4, 65536 bytes)
Apr 11 09:25:42 localhost kernel: Buffer-cache hash table entries: 32768 
(order: 5, 131072 bytes)
Apr 11 09:25:42 localhost kernel: Page-cache hash table entries: 131072 
(order: 7, 524288 bytes)
Apr 11 09:25:42 localhost kernel: Proc Config support by ptb@xxxxxxxxxx
Apr 11 09:25:42 localhost kernel: proc config counted 6528 bytes in names
Apr 11 09:25:42 localhost kernel: proc config counted 711 bytes in value 
handles
Apr 11 09:25:42 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Apr 11 09:25:42 localhost kernel: CPU: L2 cache: 256K
Apr 11 09:25:42 localhost kernel: CPU: Intel Pentium III (Coppermine) 
stepping 03
Apr 11 09:25:42 localhost kernel: Enabling fast FPU save and restore... 
done.
Apr 11 09:25:42 localhost kernel: Enabling unmasked SIMD FPU exception 
support... done.
Apr 11 09:25:42 localhost kernel: Checking 'hlt' instruction... OK.
Apr 11 09:25:42 localhost kernel: Checking for popad bug... OK.
Apr 11 09:25:42 localhost kernel: POSIX conformance testing by UNIFIX
Apr 11 09:25:42 localhost kernel: mtrr: v1.40 (20010327) Richard Gooch 
(rgooch@xxxxxxxxxxxxx)
Apr 11 09:25:42 localhost kernel: mtrr: detected mtrr type: Intel
Apr 11 09:25:42 localhost kernel: ACPI: Subsystem revision 20021122
Apr 11 09:25:42 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 
0xf0ca0, last bus=1
Apr 11 09:25:42 localhost kernel: PCI: Using configuration type 1
Apr 11 09:25:42 localhost kernel:     ACPI-0511: *** Info: GPE Block0 
defined as GPE0 to GPE15
Apr 11 09:25:42 localhost kernel: ACPI: Interpreter enabled
Apr 11 09:25:42 localhost kernel: ACPI: Using PIC for interrupt routing
Apr 11 09:25:42 localhost kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
Apr 11 09:25:42 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 
3 4 5 6 7 9 10 *11 12 14 15)
Apr 11 09:25:42 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 
3 4 5 6 7 9 *10 11 12 14 15)
Apr 11 09:25:42 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 
3 4 *5 6 7 9 10 11 12 14 15)
Apr 11 09:25:42 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 
3 4 5 6 7 *9 10 11 12 14 15)
Apr 11 09:25:42 localhost kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Apr 11 09:25:42 localhost kernel: PCI: Probing PCI hardware (bus 00)
Apr 11 09:25:42 localhost kernel: PCI: Probing PCI hardware
Apr 11 09:25:42 localhost kernel: PCI: Using ACPI for IRQ routing
Apr 11 09:25:42 localhost kernel: PCI: if you experience problems, try 
using option 'pci=noacpi' or even 'acpi=off'
Apr 11 09:25:42 localhost kernel: Linux NET4.0 for Linux 2.4
Apr 11 09:25:42 localhost kernel: Based upon Swansea University Computer 
Society NET3.039
Apr 11 09:25:42 localhost kernel: Initializing RT netlink socket
Apr 11 09:25:42 localhost kernel: Starting kswapd
Apr 11 09:25:42 localhost kernel: Journalled Block Device driver loaded
Apr 11 09:25:42 localhost kernel: devfs: v1.12c (20020818) Richard Gooch 
(rgooch@xxxxxxxxxxxxx)
Apr 11 09:25:42 localhost kernel: devfs: boot_options: 0x0
Apr 11 09:25:42 localhost kernel: vesafb: framebuffer at 0xfa000000, 
mapped to 0xd881b000, size 1536k
Apr 11 09:25:42 localhost kernel: vesafb: mode is 1024x768x16, 
linelength=2048, pages=4
Apr 11 09:25:42 localhost kernel: vesafb: protected mode interface info 
at c000:4cd8
Apr 11 09:25:42 localhost kernel: vesafb: scrolling: redraw
Apr 11 09:25:42 localhost kernel: vesafb: directcolor: size=0:5:6:5, 
shift=0:11:5:0
Apr 11 09:25:42 localhost kernel: Looking for splash picture... no good 
signature found.
Apr 11 09:25:42 localhost kernel: Console: switching to colour frame 
buffer device 128x48
Apr 11 09:25:42 localhost kernel: fb0: VESA VGA frame buffer device
Apr 11 09:25:42 localhost kernel: pty: 256 Unix98 ptys configured
Apr 11 09:25:42 localhost kernel: Real Time Clock Driver v1.10e
Apr 11 09:25:42 localhost kernel: Uniform Multi-Platform E-IDE driver 
Revision: 6.31
Apr 11 09:25:42 localhost kernel: ide: Assuming 33MHz system bus speed 
for PIO modes; override with idebus=xx
Apr 11 09:25:42 localhost kernel: VP_IDE: IDE controller on PCI bus 00 
dev 21
Apr 11 09:25:42 localhost kernel: VP_IDE: chipset revision 16
Apr 11 09:25:42 localhost kernel: VP_IDE: not 100%% native mode: will 
probe irqs later
Apr 11 09:25:42 localhost kernel: VP_IDE: VIA vt82c686a (rev 22) IDE 
UDMA66 controller on pci00:04.1
Apr 11 09:25:42 localhost kernel:     ide0: BM-DMA at 0xb800-0xb807, 
BIOS settings: hda:DMA, hdb:pio
Apr 11 09:25:42 localhost kernel:     ide1: BM-DMA at 0xb808-0xb80f, 
BIOS settings: hdc:DMA, hdd:DMA
Apr 11 09:25:42 localhost kernel: hda: Maxtor 6E040L0, ATA DISK drive
Apr 11 09:25:42 localhost kernel: hdc: ASUS CD-S400/A, ATAPI CD/DVD-ROM 
drive
Apr 11 09:25:42 localhost kernel: hdd: PLEXTOR CD-R PX-W1210A, ATAPI 
CD/DVD-ROM drive
Apr 11 09:25:42 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 11 09:25:42 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Apr 11 09:25:42 localhost kernel: blk: queue c0173344, I/O limit 4095Mb 
(mask 0xffffffff)
Apr 11 09:25:42 localhost kernel: hda: 80293248 sectors (41110 MB) 
w/2048KiB Cache, CHS=4998/255/63, UDMA(66)
Apr 11 09:25:42 localhost kernel: Partition check:
Apr 11 09:25:42 localhost kernel:  /dev/ide/host0/bus0/target0/lun0: p1 
p2 p3
Apr 11 09:25:42 localhost kernel: RAMDISK driver initialized: 16 RAM 
disks of 8192K size 1024 blocksize
Apr 11 09:25:42 localhost kernel: Equalizer1996: $Revision: 1.2.1 $ 
$Date: 1996/09/22 13:52:00 $ Simon Janes (simon@xxxxxxx)
Apr 11 09:25:42 localhost kernel: SCSI subsystem driver Revision: 1.00
Apr 11 09:25:42 localhost kernel: mice: PS/2 mouse device common for all 
mice
Apr 11 09:25:42 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Apr 11 09:25:42 localhost kernel: IP Protocols: ICMP, UDP, TCP
Apr 11 09:25:42 localhost kernel: IP: routing cache hash table of 4096 
buckets, 32Kbytes
Apr 11 09:25:42 localhost kernel: TCP: Hash tables configured 
(established 32768 bind 65536)
Apr 11 09:25:42 localhost kernel: NET4: Unix domain sockets 1.0/SMP for 
Linux NET4.0.
Apr 11 09:25:42 localhost kernel: IPv6 v0.8 for NET4.0
Apr 11 09:25:42 localhost kernel: IPv6 over IPv4 tunneling driver
Apr 11 09:25:42 localhost kernel: RAMDISK: Compressed image found at block 0
Apr 11 09:25:42 localhost kernel: Freeing initrd memory: 1410k freed
Apr 11 09:25:42 localhost kernel: VFS: Mounted root (ext2 filesystem).
Apr 11 09:25:42 localhost kernel: NCR53c406a: no available ports found
Apr 11 09:25:42 localhost kernel: aec671x_detect:
Apr 11 09:25:42 localhost kernel: scsi: <fdomain> Detection failed (no card)
Apr 11 09:25:42 localhost kernel: megaraid: v1.18 (Release Date: Thu Oct 
11 15:02:53 EDT 2001)
Apr 11 09:25:42 localhost kernel: megaraid: no BIOS enabled.
Apr 11 09:25:42 localhost kernel: DC390: 0 adapters found
Apr 11 09:25:42 localhost kernel: Failed initialization of WD-7000 SCSI 
card!
Apr 11 09:25:42 localhost kernel: 3ware Storage Controller device driver 
for Linux v1.02.00.031.
Apr 11 09:25:42 localhost kernel: 3w-xxxx: No cards with valid units found.
Apr 11 09:25:42 localhost kernel: NCR53c406a: no available ports found
Apr 11 09:25:42 localhost kernel: Red Hat/Adaptec aacraid driver, Oct 18 
2003
Apr 11 09:25:42 localhost kernel: Loading Adaptec I2O RAID: Version 2.4 
Build 5
Apr 11 09:25:42 localhost kernel: Detecting Adaptec I2O RAID controllers...
Apr 11 09:25:42 localhost kernel: sim710: No NCR53C710 adapter found.
Apr 11 09:25:42 localhost kernel: usb.c: registered new driver usbdevfs
Apr 11 09:25:42 localhost kernel: usb.c: registered new driver hub
Apr 11 09:25:42 localhost kernel: uhci.c: USB Universal Host Controller 
Interface driver v1.1
Apr 11 09:25:42 localhost kernel: uhci.c: USB UHCI at I/O 0xb400, IRQ 5
Apr 11 09:25:42 localhost kernel: usb.c: new USB bus registered, 
assigned bus number 1
Apr 11 09:25:42 localhost kernel: hub.c: USB hub found
Apr 11 09:25:42 localhost kernel: hub.c: 2 ports detected
Apr 11 09:25:42 localhost kernel: uhci.c: USB UHCI at I/O 0xb000, IRQ 5
Apr 11 09:25:42 localhost kernel: usb.c: new USB bus registered, 
assigned bus number 2
Apr 11 09:25:42 localhost kernel: hub.c: USB hub found
Apr 11 09:25:42 localhost kernel: hub.c: 2 ports detected
Apr 11 09:25:42 localhost kernel: usb.c: registered new driver hid
Apr 11 09:25:42 localhost kernel: hid-core.c: v1.8.1 Andreas Gal, 
Vojtech Pavlik <vojtech@xxxxxxx>
Apr 11 09:25:42 localhost kernel: hid-core.c: USB HID support drivers
Apr 11 09:25:42 localhost kernel: Initializing USB Mass Storage driver...
Apr 11 09:25:42 localhost kernel: usb.c: registered new driver usb-storage
Apr 11 09:25:42 localhost kernel: USB Mass Storage support registered.
Apr 11 09:25:42 localhost kernel: hub.c: new USB device 00:04.2-2, 
assigned address 2
Apr 11 09:25:42 localhost kernel: scsi0 : SCSI emulation for USB Mass 
Storage devices
Apr 11 09:25:42 localhost kernel:   Vendor: SanDisk   Model: ImageMate 
II      Rev: 1.30
Apr 11 09:25:42 localhost kernel:   Type:   Direct-Access 
       ANSI SCSI revision: 02
Apr 11 09:25:42 localhost kernel: Attached scsi removable disk sda at 
scsi0, channel 0, id 0, lun 0
Apr 11 09:25:42 localhost kernel: SCSI device sda: 15681 512-byte hdwr 
sectors (8 MB)
Apr 11 09:25:42 localhost kernel: sda: Write Protect is off
Apr 11 09:25:42 localhost kernel:  /dev/scsi/host0/bus0/target0/lun0: p1
Apr 11 09:25:42 localhost kernel: reiserfs: checking transaction log 
(device 03:03) ...
Apr 11 09:25:42 localhost kernel: Using r5 hash to sort names
Apr 11 09:25:42 localhost kernel: ReiserFS version 3.6.25
Apr 11 09:25:42 localhost kernel: VFS: Mounted root (reiserfs 
filesystem) readonly.
Apr 11 09:25:42 localhost kernel: Trying to move old root to /initrd ... 
failed
Apr 11 09:25:42 localhost kernel: Unmounting old root
Apr 11 09:25:42 localhost kernel: Trying to free ramdisk memory ... okay
Apr 11 09:25:42 localhost kernel: Freeing unused kernel memory: 100k freed
Apr 11 09:25:42 localhost kernel: Adding Swap: 506036k swap-space 
(priority -1)
Apr 11 09:25:42 localhost kernel: inserting floppy driver for 
2.4.20-gentoo-r6
Apr 11 09:25:42 localhost kernel: Floppy drive(s): fd0 is 1.44M
Apr 11 09:25:42 localhost kernel: FDC 0 is a post-1991 82077
Apr 11 09:25:42 localhost kernel: end_request: I/O error, cmd 0 dev 
02:00 (floppy), sector 0
Apr 11 09:25:42 localhost kernel: es1371: version v0.30 time 22:29:31 
Oct 18 2003
Apr 11 09:25:42 localhost kernel: es1371: found chip, vendor id 0x1274 
device id 0x5880 revision 0x02
Apr 11 09:25:42 localhost kernel: es1371: found es1371 rev 2 at io 
0xa000 irq 9
Apr 11 09:25:42 localhost kernel: es1371: features: joystick 0x0
Apr 11 09:25:42 localhost kernel: ac97_codec: AC97  codec, id: 
TRA35(TriTech TR A5)
Apr 11 09:25:42 localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald 
Becker http://www.scyld.com/network/eepro100.html
Apr 11 09:25:42 localhost kernel: eepro100.c: $Revision: 1.36 $ 
2000/11/17 Modified by Andrey V. Savochkin <saw@xxxxxxxxxxxxx> and others
Apr 11 09:25:42 localhost kernel: eth0: Intel Corp. 82557/8/9 [Ethernet 
Pro 100], 00:02:B3:03:7B:C1, IRQ 10.
Apr 11 09:25:42 localhost kernel:   Board assembly 721383-016, Physical 
connectors present: RJ45
Apr 11 09:25:42 localhost kernel:   Primary interface chip i82555 PHY #1.
Apr 11 09:25:42 localhost kernel:   General self-test: passed.
Apr 11 09:25:42 localhost kernel:   Serial sub-system self-test: passed.
Apr 11 09:25:42 localhost kernel:   Internal registers self-test: passed.
Apr 11 09:25:42 localhost kernel:   ROM checksum self-test: passed 
(0x04f4518b).
Apr 11 09:25:43 localhost kernel: eth1: Intel Corp. 82557/8/9 [Ethernet 
Pro 100] (#2), 00:02:B3:07:A5:8B, IRQ 5.
Apr 11 09:25:43 localhost kernel:   Board assembly 721383-016, Physical 
connectors present: RJ45
Apr 11 09:25:43 localhost kernel:   Primary interface chip i82555 PHY #1.
Apr 11 09:25:43 localhost kernel:   General self-test: passed.
Apr 11 09:25:43 localhost kernel:   Serial sub-system self-test: passed.
Apr 11 09:25:43 localhost kernel:   Internal registers self-test: passed.
Apr 11 09:25:43 localhost kernel:   ROM checksum self-test: passed 
(0x04f4518b).
Apr 11 09:25:43 localhost pci.agent[1349]: ... can't load module e100
Apr 11 09:25:43 localhost pci.agent[1349]: missing kernel or user mode 
driver e100
Apr 11 09:25:43 localhost pci.agent[1349]: ... can't load module e100
Apr 11 09:25:43 localhost pci.agent[1349]: missing kernel or user mode 
driver e100
Apr 11 09:25:43 localhost kernel: parport0: PC-style at 0x378 (0x778) 
[PCSPP,TRISTATE]
Apr 11 09:25:43 localhost kernel: parport0: Printer, Hewlett-Packard HP 
LaserJet 1200
Apr 11 09:25:43 localhost kernel: parport_pc: Via 686A parallel port: 
io=0x378
Apr 11 09:25:43 localhost pci.agent[1450]: ... can't load module e100
Apr 11 09:25:43 localhost pci.agent[1450]: missing kernel or user mode 
driver e100
Apr 11 09:25:43 localhost pci.agent[1450]: ... can't load module e100
Apr 11 09:25:43 localhost pci.agent[1450]: missing kernel or user mode 
driver e100
Apr 11 09:25:43 localhost pci.agent[1503]: ... can't load module e100
Apr 11 09:25:43 localhost pci.agent[1503]: missing kernel or user mode 
driver e100
Apr 11 09:25:43 localhost pci.agent[1503]: ... can't load module e100
Apr 11 09:25:43 localhost pci.agent[1503]: missing kernel or user mode 
driver e100
Apr 11 09:25:43 localhost pci.agent[1556]: ... can't load module e100
Apr 11 09:25:43 localhost pci.agent[1556]: missing kernel or user mode 
driver e100
Apr 11 09:25:43 localhost pci.agent[1556]: ... can't load module e100
Apr 11 09:25:43 localhost pci.agent[1556]: missing kernel or user mode 
driver e100
Apr 11 09:25:44 localhost pci.agent[1609]: ... can't load module e100
Apr 11 09:25:44 localhost pci.agent[1609]: missing kernel or user mode 
driver e100
Apr 11 09:25:44 localhost pci.agent[1609]: ... can't load module e100
Apr 11 09:25:44 localhost pci.agent[1609]: missing kernel or user mode 
driver e100
Apr 11 09:25:44 localhost pci.agent[1662]: ... can't load module e100
Apr 11 09:25:44 localhost pci.agent[1662]: missing kernel or user mode 
driver e100
Apr 11 09:25:44 localhost pci.agent[1662]: ... can't load module e100
Apr 11 09:25:44 localhost pci.agent[1662]: missing kernel or user mode 
driver e100
Apr 11 09:25:44 localhost pci.agent[1715]: ... can't load module e100
Apr 11 09:25:44 localhost pci.agent[1715]: missing kernel or user mode 
driver e100
Apr 11 09:25:44 localhost pci.agent[1715]: ... can't load module e100
Apr 11 09:25:44 localhost pci.agent[1715]: missing kernel or user mode 
driver e100
Apr 11 09:25:44 localhost pci.agent[1768]: ... can't load module e100
Apr 11 09:25:44 localhost pci.agent[1768]: missing kernel or user mode 
driver e100
Apr 11 09:25:44 localhost pci.agent[1768]: ... can't load module e100
Apr 11 09:25:44 localhost pci.agent[1768]: missing kernel or user mode 
driver e100
Apr 11 09:25:44 localhost pci.agent[1821]: ... can't load module e100
Apr 11 09:25:44 localhost pci.agent[1821]: missing kernel or user mode 
driver e100
Apr 11 09:25:45 localhost pci.agent[1821]: ... can't load module e100
Apr 11 09:25:45 localhost pci.agent[1821]: missing kernel or user mode 
driver e100
Apr 11 09:25:45 localhost pci.agent[1874]: ... can't load module e100
Apr 11 09:25:45 localhost pci.agent[1874]: missing kernel or user mode 
driver e100
Apr 11 09:25:45 localhost pci.agent[1874]: ... can't load module e100
Apr 11 09:25:45 localhost pci.agent[1874]: missing kernel or user mode 
driver e100
Apr 11 09:25:45 localhost pci.agent[1928]: ... can't load module e100
Apr 11 09:25:45 localhost pci.agent[1928]: missing kernel or user mode 
driver e100
Apr 11 09:25:45 localhost pci.agent[1928]: ... can't load module e100
Apr 11 09:25:45 localhost pci.agent[1928]: missing kernel or user mode 
driver e100
Apr 11 09:25:46 localhost dhcpcd[2073]: infinite IP address lease time. 
Exiting
Apr 11 09:25:47 localhost kernel: lp0: using parport0 (polling).
Apr 11 09:25:47 localhost kernel: isapnp: Scanning for PnP cards...
Apr 11 09:25:47 localhost kernel: isapnp: No Plug & Play device found
Apr 11 09:25:47 localhost kernel: Serial driver version 5.05c 
(2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Apr 11 09:25:47 localhost kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Apr 11 09:25:47 localhost kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Apr 11 09:59:04 localhost gconfd (gentoo-2611): starter (version 
2.4.0.1), pid 2611 bruger 'gentoo'
Apr 11 09:59:04 localhost gconfd (gentoo-2611): Bestemte adressen 
"xml:readonly:/etc/gconf/gconf.xml.mandatory" til en skrivebeskyttet 
konfigureringskilde ved position 0
Apr 11 09:59:04 localhost gconfd (gentoo-2611): Bestemte adressen 
"xml:readwrite:/home/gentoo/.gconf" til en skrivbar konfigureringskilde 
ved position 1
A